Hello sir need po ba learn if nag clean ng egr at map sensor?if ung rpm same as before na stable?
@theamateurdiy-personalexpe9299
4 ай бұрын
Yes po Sir advisable po na mag-relearn para maibalik sa dating setting. Yung iba hindi na nagre-relearn although okay naman daw.
@charlmarx77
6 ай бұрын
Hi very good video.. how many times you touch the cable to the metal bar? Tq
@theamateurdiy-personalexpe9299
6 ай бұрын
5 times bro.
@handymixpullup4971
3 ай бұрын
Hello sr if I replace a new MAP I need to do that to?
@theamateurdiy-personalexpe9299
3 ай бұрын
@handymixpullup4971 Yes, to ensure the system can recognize the new installed MAP sensor and to restore its default setting of the system.
@Ali-jh6vd
2 ай бұрын
2010 rangerde map turbo n75 degisti arac kesik kesik calisiyor turbo bazen calisiyor yardim icin tesekurler
@theamateurdiy-personalexpe9299
2 ай бұрын
Hi buddy, please translate your message in English as I don’t understand your language. Thank you and have a great day.
@carlosromeoramirez5982
Ай бұрын
Hello sir, ask ko lang halos kasi nakikita ko na 09 everest ummabot ng 5k rpm kahit naka park. Saakin kasi umaabot lang ng 3.5k rpm. Map sensor po ba need linisin?
@theamateurdiy-personalexpe9299
Ай бұрын
Same tayo Sir 3.5K rpm lang kayang maabot. siguro po kailangan mo maglinis ng Intake manifold, EGR, Throttle valve at turbo. Isama mo jandin ang MAP at MAf Sensors. Ang eve namin kapag idiniin ko pa ang apak para nasayad na yung turbine blade (not sure ano na tawag doon) ng turbo. Hindi po MAP Sendor yan. Kapag faulty ang MAP Sensor mahina ang hatak at ang maximum speed lang na kaya ay 80kph.
@rsclaytiger
Ай бұрын
Hindi ba para sa MAF ung relearning?
@theamateurdiy-personalexpe9299
Ай бұрын
Nagre-relearn po ako kapag tinanggal ko ang MAP Sensor, MAF Sensor at Throttle Assembly/body.
@shankaranandravichandran4357
4 ай бұрын
Hi. I am from India i use the same model called Endeavour. I had issue with turbo charger actuator door, i serviced and installed the turbo again. After that car is even more sluggish and check engine light pops out and on obd scanner it shows MAF sensor. Should i relearn the MAF sensor as because my battery was disconnected for more than a day. If i disconnect the maf sensor and drive the veichle is good. My question is should i relearn it or should i buy new one
@theamateurdiy-personalexpe9299
4 ай бұрын
If the CEL (check engine light) is still showing, try to clean the MAF Sensor. If the CEL still showing after the cleaning of MAF Sensor, it means you have a faulty MAF sensor. I advise you to buy a new MAF and replace the faulty sensor. You can relearn the new MAF Sensor after installation.
@shankaranandravichandran4357
4 ай бұрын
@@theamateurdiy-personalexpe9299 my Maf sensor was good with bad turbo, there was no CEL before, once turbo has been serviced and fixed, i face this issue. Once i plug in sensor the veichles smokes like anything and doesnt boost. If i remove the sensor the veichle moves freely.
@theamateurdiy-personalexpe9299
4 ай бұрын
Then you have a bad or faulty MAF Sensor. Your OBD scanner also proved that MAF was the caused of the CEL.
@shankaranandravichandran4357
4 ай бұрын
@@theamateurdiy-personalexpe9299 Identified the issue. Its not with any other sensors. When i disconnect the vaccum pipe from turbo, the car moves Freely and reaches good speed and no CEL lights. Once i conncect the vaccum pipe no boost, black smoke, no pickup, CEL lights comes again. Now what is the issue.
@theamateurdiy-personalexpe9299
4 ай бұрын
When you fixed your Turbo Actuator, did you test it if it actuate? When you have a faulty turbo actuator, the effects are: 1) you will have a check engine warning lights, 2) your car will have a complete loss of power, 3) You have low- or over-boost, meaning either your vehicle is lagging or overcompensating when you accelerate.
@lowkey1784
Ай бұрын
Boss reliable ba yung ganitong engine ano common issue?
@theamateurdiy-personalexpe9299
Ай бұрын
Para sa akin Sir reliable po kasi 15 years (Model 2009) ko ng gamit yang Everest namin simula ng nabili ko ng brand new. Basta PMS lagi every 6 months. Common issue, wala naman, kaya lang syempre mga wear and tear na parts dapat laging i-check para kung kailangan ng palitan dapat palitan na. Sa 15 yrs na gamit ko yang car namin, ang major na napalitan ko dyan ay una yung radiator, nag-crack na kasi yung plastic sa ibabaw dahil sa katagalan na. Ikalawa, yung vacuum pump, nag leak kaya palit O-Ring. Pangatlo, nagpalit na din ako ng MAP Sensor, brakes at syempre yung mga gulong. Yun lang po Sir, basta alagaan lang ng tama para kunti lang maging issue.
@JayRianJalandoni-bq2en
11 ай бұрын
Idol baka pwede po paturo kung paano baklasin at palitan ang lahat ng bulb sa harap at likod idol para makatipid po sa labor. Salamat po
@theamateurdiy-personalexpe9299
11 ай бұрын
Sir mayron po akong isang video kung paano magpalit ng bulb sa likod (title: diy how to remove tail light). Hanapin mo nalang sa list ng videos ko. Yung sa harap wala pa akong nagawang videos later nalang siguro kasi busy pa sa work. Maki-join ka sa “Ford Everest Classics” may mga post yata doon kung paano magpalit ng head lights at parking lights. Yung parking lights dinudukot sa tabi ng gulong. Tanggalin lang yung cover ng mad guard.
@JayRianJalandoni-bq2en
11 ай бұрын
@@theamateurdiy-personalexpe9299 sige po. Maraming salamat idol.
@user-dg7ep4hv3q
9 ай бұрын
Sir, ano po ang dahilan bakit need mag relearn after linisin ang map sensor. Thank you
@theamateurdiy-personalexpe9299
9 ай бұрын
Sir kapag tinanggal ang MAP at MAF Sensor or kahit alin man sa dalawang yan, kailangan daw mag-relearn para bumalik sa dating setting ang idle ng car natin. Ibang tawag dyan ay Idle Relearn or Idle re-setting. Kung hindi ma-relearn after na matanggal ang MAP or MAF sensor magiging erratic ang Idle ng car natin.
@theamateurdiy-personalexpe9299
9 ай бұрын
@user-dg7ep4hv3q Sir kapag tinanggal ang MAP at MAF Sensor or kahit alin man sa dalawang yan, kailangan daw mag-relearn para bumalik sa dating setting ang idle ng car natin. Ibang tawag dyan ay Idle Relearn or Idle re-setting. Kung hindi ma-relearn after na matanggal ang MAP or MAF sensor magiging erratic ang Idle ng car natin
@theyapsworld9960
10 ай бұрын
Sir same process din ba sa pag relearning sa ford ranger 2.5 2008 model?
@theamateurdiy-personalexpe9299
10 ай бұрын
Siguro same process din Sir. Ganyan din kasi ang process na ginagawa ng mga kasamahan namin sa club. Ilang ulit din akong nag-try hangga umabot yata ng pang 7 try saka palang naging successful ang relearn sa Eve 2010 namin.
@megabetlog
4 ай бұрын
Hello ka FEC nagkaron po ako ng p0107 and p2227 error code, ginawa ng mechanic replace air filter and clean MAF sensor, na clear nmn po ung code, pero every 20mins of driving umiilaw ung engine light, thank you in advance
@megabetlog
4 ай бұрын
Btw ford everest 2013 unit ko po
@theamateurdiy-personalexpe9299
4 ай бұрын
Sir hindi talaga mawawala ang CEL (Check Engine Ligth) kasi MAF Sensor ang nilinis. Dapat MAP Sensor sana. Ang P0107 ay para sa Manifold Absolute Pressure at P2227 ay Barometric Pressure which is same lang. Ipalinis mo ang MAP Sensor ni Eve mo Sir. Kung may CEL parin after cleaning baka faulty na at kailangan mo ng magpalit ng MAP Ganyan din kasi ang lumabas na TDC ng Eve namin noon ng nag-scan ako dahil nga may CEL, 80KPh Max lang kaya nya noon. Nagpalit ako ng MAP at nawala ang CEL at balik sigla ang Eve namin.
@AG-bo9pp
28 күн бұрын
Sir good day po.. ang pag rerelearned po ba ay applicable sa lahat ng car na nagpapalit ng mga sensor o sa ford lang po? Tnx po in advance.
@theamateurdiy-personalexpe9299
28 күн бұрын
Applicable po sa lahat ng car Sir, hwag lang yung lumang-luma na.
@JayRianJalandoni-bq2en
11 ай бұрын
Same unit sa inyo po
@user-xw5xk6sm8g
5 ай бұрын
Hello po boss tuwing kelan po dapat palitan timing belt ng ford everest nasa 75k na odo ng sasakyan ko salamat po
@theamateurdiy-personalexpe9299
5 ай бұрын
As per Manual ng Ford Everest Sir ang pagpalit ng TB ay every 120,000Kms. Pero base naman po naman sa mga experience mechanic, dapat daw every 80,000Kms palit na ng TB.
@user-xw5xk6sm8g
5 ай бұрын
Salamat po sir
@user-xw5xk6sm8g
5 ай бұрын
Boss pwede ba mag pa change atf kahit hindi na palitan filter salamat
@theamateurdiy-personalexpe9299
5 ай бұрын
Para sa akin Sir, mas mainam kapag mag-change ATF ka, palit Filter ka na din. Yun din naman kasi ang recommended sa lahat ng cars na may Automatic Transmission. Matagal naman napapalitan yan hindi katulad ng Oil Filter na during PMS.
@user-xw5xk6sm8g
5 ай бұрын
Salamat ulit boss pano po pag nagpalit ng timing belt kailangan din bang magpalit ng tensioner kahit ok pa naman
@rolandjaymarquez1798
7 ай бұрын
Sir good eve. San ho shop nyo? Ty.
@theamateurdiy-personalexpe9299
7 ай бұрын
Good morning Sir, wala po akong shop personal car ko po yang nasa video at ako mismo ang gumagawa sa mga car namin
@chowkichao
5 ай бұрын
What is the purpose of re-learning?
@theamateurdiy-personalexpe9299
5 ай бұрын
Relearning is the other term or meaning of resetting. In short, the purpose is to put the system back to its original setting. We do this every time we remove/replace instruments like MAP / MAF Sensors and others.
Пікірлер: 65