Step-by-step guide on programming new keyless entry remote key fob on Ford Expedition SUV. You will not need any tools or scanners and you don't need a working key fob to be able to program a new one. ( 2003 | 2004 | 2005 | 2006 | XL | XLT | LIMITED | EDDIE BAUER ).
You can get a new keyfob from a Ford dealer, online or even at your local car salvage. Follow this procedure to program each new key fob:
1. Close all the vehicle doors
2. Open the driver door and press Unlock button
3. Insert key into the ignition lock
4. Toggle the key between OFF and RUN 8 times
5. Door locks will Lock / Unlock
6. Press Lock or Unlock on each key fob you want to program
7. Once done turn the key to the OFF position and remove it from the ignition lock
8. Door locks will Lock / Unlock
9. Key Fob programming is done
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Ford Expedition - HOW TO PROGRAM KEYLESS ENTRY KEY FOB (2003 - 2006)
Пікірлер