Thanks very much for the video sir. The knowledge about the bracket connecting the back of the intake plenum to that beforehand was extremely helpful!!!! I used a health supply of P.B. Blaster into the plug holes and worked them back and forth gently till they all came out. Mine had 157,000 on the original plugs and still came out fairly easily. They were shot, checked the gap and they were .012 to .017 over tolerance so they were due. Lol
@justint7289
2 жыл бұрын
I love the, “always torque your spark plugs” “click” 😂😂😂 thank you for the laugh!!! Great video
@TheDieseldog
2 жыл бұрын
👍🏼👍🏼
@lunalancer5971
2 жыл бұрын
Gets me every time.
@kevinerickson84
2 жыл бұрын
lol love it
@greasee.monkey7224
3 жыл бұрын
I have felt your pain on the plugs. I work on alot of these engines & fighting spark plugs out is pretty common. I'm glad everything cooperated in the end. 👍👍
@migueldelgado2409
Жыл бұрын
Great video! I was able to do my spark plugs on my explorer following your video.
@dogmando22000
2 жыл бұрын
Great video. Straight forward and common sense. Thanks for the effort.
@brentneahring2797
Жыл бұрын
My advice when trying to take out spark plugs, run the engine for five minutes to just warm it up slightly and make them easier to get out.
@jjohnson4341
2 жыл бұрын
Add the same thing just happened to me took it to Pep Boys told me they’ll charge me $850 and it all needs a tuneup tuneup So I’m going to attempt to do this on my own and save myself a lot of money Your video really gave me some confidence to do this
@kentmorris9222
Жыл бұрын
Bro made this look easy. First year I got my Ford I took it in to the mechanics to get this done haha
@pyro_warrior5924
2 жыл бұрын
Hey brotha, I had a misfire on my #5 took the coil out and that part was wrinkled up too. I straighten it out and gave the coil a clean. Cleared the code, swapped the coil to #4 ran it, ran great. Switched it back to #5 and ran great also. So far it’s good.
@BigEbobbers76
2 жыл бұрын
My dad taught us to use a flexible hose(usually an air hose of some sort) that the plug will fit snug in to start threading the plugs back in. This keeps from cross threading,works every time
@TheDieseldog
2 жыл бұрын
That’s a good trick
@eshkakogan75
Жыл бұрын
Disconnect the battery first. Arcing of unplugged components could cause other issues. I think🤣 Great video!
@MrRainbowrooster
Жыл бұрын
Good Video! Thanks for taking the time to do it. What is the socket size for the spark plugs? Not sure if I need to get one or have one. Thanks
@DanVH
Жыл бұрын
Exact same issue in mine. Thanks for the video!
@NellyEIEI
2 жыл бұрын
Don't forget the continuum transfunctioner. Changed mine and now it flies!
@TheDieseldog
2 жыл бұрын
I change it with every light bulb rotation.
@NellyEIEI
2 жыл бұрын
@@TheDieseldog 😂😂
@kevinerickson84
2 жыл бұрын
great video! getting ready to take a trip to paris island SC in the same exploder! lol thought it might be a good time to change some plugs.
@spudnreno
11 ай бұрын
Great video, thanks. 👍
@bradsmith950
2 жыл бұрын
They come with 100K plugs. Gen need changed around 110k. Those are the original equipment plugs I think it's really safe to assume that those were the ones that came in it
@nutzboltztoolz2734
3 жыл бұрын
You got lucky, definitely thought that plug was going to break
@Jackson-qf7uv
3 ай бұрын
i hate when engineers say "Screw it, ill put a lot of stuff and make them spend $700 to change 4 spark plugs" lol
@voproxy
2 жыл бұрын
When torquing the intake manifold are you sure it was torqued at 89inch pounds? I broke a bolt off in the head before I even reached 80inch pounds.
@Arturo-im1nh
Жыл бұрын
Have you ever done a coolant flush on it? Can’t seem to find KZitem videos specifically to the Explorer for this:/
@ferdamravenec7998
Жыл бұрын
Iridium spark plug S2RE14PLP Hello Past that for Explorer 2013 ?? Thanks
@markbridenbeck1030
Жыл бұрын
What size socket? And how long so I don’t hav2 use the extension
@tokahontas9990
2 жыл бұрын
Motorcraft plugs would be OEM I’d assume
@shauntayb7847
2 жыл бұрын
Changed my spark plugs and ended up with a starting system fault when trying to turn the ignition. I need help?
@derekw8177
2 жыл бұрын
I have a misfire in cylinder 3. Which spot is that?
@NorthEastFilmz57
2 жыл бұрын
did u ever find out?
@derekw8177
2 жыл бұрын
@@NorthEastFilmz57 yes thank you. Ended up needing spark plugs and starter. Thought maybe it was a coil pack also but the starter went out lol
@NorthEastFilmz57
2 жыл бұрын
@@derekw8177 oh sheesh.im give my ah look 2day!
@thomasdaum1927
Жыл бұрын
Its between no. 2 and no. 4 ! Ha Ha !……..
@Garage.Man-001
3 жыл бұрын
Hello my friend, do you need a truck mechanic technician to work with you.?
@w.c.6678
Жыл бұрын
Does EVERY plug change video on the Fords NOT include putting BACK IN, the 8mm Behind the throttle body? Why is that? Forgot? Or too hard to do? Literally, EVERY vid on this..
@Daves3DProjects
Жыл бұрын
Nothing is easy to repair on these Ford Explorers. I'll never buy another one.
@jaybarnhart8920
2 жыл бұрын
Hope you change the PTU fluid .... it will cost you if you don't!
@TheDieseldog
2 жыл бұрын
I have not yet but I plan to. Thanks for the heads up 👍🏼
Пікірлер: 41