Hardcore mechanics around here. Screwdriver up the nose and not one comment. Everywhere I have worked there is always that one guy that gets hurt in weird ways way too often. Thanks for the videos man..
@cdsfleetrepairs
6 жыл бұрын
not much in youtube land on the 6.2 good info thanks for video
@ADVANCEDLEVELAUTO
6 жыл бұрын
Thanks for watching!
@tomsawyer4776
3 жыл бұрын
An old mechanic once showed me how to find the source of mechanical noise by using a shortened wooden broomstick placed on your ear and then various parts of an engine or gear box. Of course, you can buy a $150 stethoscope from SnapOn...but the broom stick works well.
@davidwoermansr
2 жыл бұрын
A long screwdriver also works
@greengmcrob
5 жыл бұрын
Nice job. The camera is great. You could see the cross hatch marks on the cylinder walls.
@croquest8749
2 жыл бұрын
My 5.4 3v was putting out cyl p0300 p0305 p0306 shaking like crazy . Also lean codes on bank one +flashing check engine light . Dealer wanted to put new motor in it. 2 local mechanics wanted to do phasers and intake and plugs. After taking it apart and inspecting it turned out to be cylinder #6 exhaust valve spring broke. $3.00 part. About 2 hrs work and it runs great now.
@jordanstaal01-107
Жыл бұрын
I recently purchased a 18 f250 with 232k all highway. Caterpillar dealer owned as their parts truck. It runs great! I just did the tranny service to it, first time it’s ever been done. It had hardly any metal flakes on the magnets.
@FordManiac76
4 жыл бұрын
You skipped the valve cover removal and the spring reasonably. When making a mechanical video don’t skip any steps no matter how small. You can fast forward through routine parts like bolt removal but don’t skip parts.
@thecool5080
5 жыл бұрын
That 6.2 gas must be a pretty strong motor. At 215000 miles you could still see the cross hatch on the bore. Good video
@ADVANCEDLEVELAUTO
5 жыл бұрын
A year later and this truck is still hauling loads back and forth from Houston Texas to Oklahoma City multiple times a week.
@TexasMan77
2 жыл бұрын
@@ADVANCEDLEVELAUTO How many miles now? Any issues?! Just curious thanks…
@PassTheJJ
6 жыл бұрын
excellent video....job has a 2015 thats doing exact same thing...wish i would have saw ur video b4 changing 8 wires and 16 plugs...lol....
@ADVANCEDLEVELAUTO
6 жыл бұрын
Glad I could help! Thanks for watching!
@rdp2370
3 жыл бұрын
I had thought that poston had some sign abnormal combustion by looking at what appeared to be some cracks in the crown, guessing that was not the case. Glad a spring fixed it and the video!
@mathamilton5616
6 жыл бұрын
Buddy's 13 6.2 started running like shit and knocking this morning with whierd brake shit accompanying. Found this video and pulled valve covers broke spring cyl 8! Thank you!
@danilobaca7901
5 жыл бұрын
great job, this happened to me, but i have to take off both valve cover to find and number 1 and 5 cylinder spring broken, greeting
@BOBHANNA01
4 жыл бұрын
Had, same thing at 136k, mine wasn't making any noises had misfired that were all over the place, Did compression test found cylinder 7 dead, pulled valve cover to find broken spring.
@johnnolte4455
5 жыл бұрын
This video helped me diagnose mine, thanks chief.
@ADVANCEDLEVELAUTO
5 жыл бұрын
No problem. Thanks for watching!
@jtsfishing5571
6 жыл бұрын
thanks for this video just lost compression on #4 video helped diagnose my broke spring on 6.2
@ADVANCEDLEVELAUTO
6 жыл бұрын
Glad I could help! Thanks for watching!
@jtsfishing5571
6 жыл бұрын
ADVANCED LEVEL AUTO got the spring in today runs perfect!
@optonstewart4148
3 жыл бұрын
Love it...I have a 2014 F250...same issue...thanks again great Video
@Taydrum
4 жыл бұрын
dude that battery connection
@jdzela2334
6 жыл бұрын
great job Sir. thank you for sharing.
@ADVANCEDLEVELAUTO
6 жыл бұрын
Thank you for watching!
@dragannestorovic01
5 жыл бұрын
Thanks for the video - she sure sounds a lot better after the repair! lol
@JEFFSIMPSON-es6ey
4 ай бұрын
Great video! Thank you!
@microbiochem
3 жыл бұрын
Great work. And fantastic video
@prohen3049
5 жыл бұрын
I have a 6.2 and it's blowing smoke so thick it chokes out the whole neighborhood. I know it has a vavle issue but I wouldn't think it would be smoking that bad.
@ADVANCEDLEVELAUTO
5 жыл бұрын
PRO HEN Hopefully it didn’t crack the piston.
@Jim-zy3lf
4 жыл бұрын
11,000 miles. Start up Thumping Exhaust occasionally Pop's Never had this problem F350 SUPER DUTY 4X4 "17" love IT it should idle Better . Dealer say's IT CHECKS OUT OK !! all You have to do is "Listen" My Shelby 17 GT350 Doesn't ! 3.5 Ecoboost next ?????
@earlscruggs4106
4 жыл бұрын
I have a 2017 started this at 24000 miles
@justgotpaid5
6 жыл бұрын
I just had a valve spring replaced on my 6.2l 2015 F250, 137,000 Miles. Do I need to be worried about future issues? Should I trade it in to be safe?
@ADVANCEDLEVELAUTO
6 жыл бұрын
From my experience, these motors seem to be very durable. I think with regular maintenance the truck could last for many years. Thanks for watching!
@ojmcbaggins
3 жыл бұрын
My 6.2 did this today after a service at my Ford dealer. 75k miles
@stevehpperf2402
3 жыл бұрын
Put 16 new ones in it or sooner or later your luck will run out and one will break and drop down the hole
@ojmcbaggins
3 жыл бұрын
@@stevehpperf2402 had them replaced, left the shop and the truck started tapping. Brought it back and they said broken exhaust manifold. Took it to another dealer and they found a crossthreaded spark plug!
@superdutysquad2256
Жыл бұрын
I gotta 06 f350 6.0 blowing white smoke and shaking bad shop told me cylinder 2 misfire in thinking this is the problem what is the cost to have a broken valve spring replaced thank you
@matiasguiguez1357
6 жыл бұрын
how did you change out the springs wish you would have included that in the video. overall great vid thanks for the help.
@ADVANCEDLEVELAUTO
5 жыл бұрын
matias Guiguez I used compressed air into the cylinder to hold up the valve while I replaced the spring using the tool I showed.
@jamesswenson5939
4 жыл бұрын
Are those 6.2 liters good? I’m looking at one with 90,000 miles on it. Is there anything I should look out for?
@terryleimonis
5 жыл бұрын
Did you end up pulling the timing chains or did you wedge the gear? how did you line it back up for timing purposes?
@ADVANCEDLEVELAUTO
5 жыл бұрын
I did not remove the cylinder head to replace the spring. I simply used compressed air in the cylinder to hold the valve closed while I changed the spring using the tool I show at the end of the video. Thanks for watching!
@johncrowe8478
4 жыл бұрын
ADVANCED LEVEL AUTO how much air pressure is needed to keep the valve sealed up for the change?
@WestRidgeFARM
10 ай бұрын
Great video !
@TheCumminsturbo2
4 жыл бұрын
The 6.2 is a amazing engine and will take a lot of abuse the truck probably has 20000hours in it to because they are ideling all the time
@anthonyfisher4874
3 жыл бұрын
Excellent video!!!
@tinog76tg
6 жыл бұрын
I have a 2011 f250 with 6.2L do you know where the variable valve timing solenoid.?
@ADVANCEDLEVELAUTO
6 жыл бұрын
I believe they are on or near the cam gears. Thanks for watching!
@CarStuffNM
5 жыл бұрын
Great Video Very informative!
@moez462
3 жыл бұрын
Dude what city are you in? My truck is also having a very similar issue. Same year but only 130kmiles tho
@daw764
6 жыл бұрын
Seems kinda impudent to keep it running with all that knocking. A broken valve spring can cause further damage if left running.
@ADVANCEDLEVELAUTO
6 жыл бұрын
skip to 3:35 I explain why I only run the engine long enough to do my checks. Thank you for watching!
@justinjarmus9028
3 жыл бұрын
Great job.
@lisatrujillo3173
4 жыл бұрын
Hey just a quick question how do I go about 100,000 miles I think it’s time to get rid of that truck it’s a 2015
@Ram-re5em
5 жыл бұрын
My engine comparative to never looks like that mess. This truck has been beaten on
@chrisnull4636
5 жыл бұрын
What did you torque the rocker bolts to? My cam slid forward about a 16th of an inch and it has a loud clap just like the truck in video. Compression is good, spark is good, multiple misfire, and sounds like a diesel. What are the cam and rocker torque specs? Its been a month and ford wont get back to me and can only find head bolt torque specs online.
@DylanL69
2 жыл бұрын
With a bad misfire you're not just damaging the cats but also the cylinder walls themselves
@jeffseay7865
3 жыл бұрын
Good information
@derekhartter5179
3 жыл бұрын
Any concerns with the damage to the piston?
@matthewcamillo695
Жыл бұрын
wouldn't you change them all, at least on the same side? This being a known issue with this motor.
@colton8552
5 жыл бұрын
Is this a very common problem with the 6.2 or is this just one of those random fails??
@ADVANCEDLEVELAUTO
5 жыл бұрын
I’ve done a few of them, so maybe it’s a known issue.
@Dead-Goldstar
Жыл бұрын
When you do a compression test on a vehicle that has 2 spark plugs per cylinder do you leave one spark plug-in and use the other one to hookup the compression tester too
@richardnunn1958
Жыл бұрын
yes remove both spark plugs from each cylinder from the 6.2
@ms.karihart2983
4 жыл бұрын
How many miles did this 2014 f250 have when this happen
@greenmachinepowerstroke2419
3 жыл бұрын
So did the valve contact the cylinder on that edge ? Or is that just the design of the cylinder? I would think it didn't or the valve would be damaged. What are your thoughts? This happened to my 2015 with the 6.2 but I wasn't this lucky and the valve dropped far enough in and contacted cylinder #7 piston. Had to get a remand engine put in
@patricgasper5991
Жыл бұрын
What happened?
@robmarshall7533
4 жыл бұрын
What snap on kit do you have for compression testing?
@TheRichardmay1
11 ай бұрын
Really great thank you
@search4unknown
5 жыл бұрын
So all that for just 1 spring?
@ADVANCEDLEVELAUTO
5 жыл бұрын
Yes sir.
@davidwoermansr
2 жыл бұрын
Oil fields need 7,3 powerstrokes in their superdutys
@HouseCallAutoRepair
2 жыл бұрын
Relative compression test WITHOUT an amp probe: Scope the VOLTAGE drop on the battery cable, "+" at the battery, (-) at the started end. Clear flood and crank... A voltage drop test can be performed ANYWHERE that current is present.
@ADVANCEDLEVELAUTO
2 жыл бұрын
True. I guess I was just used to doing it that way. Thanks for watching!
@hillbillyeverything4357
6 жыл бұрын
Is this a common problem with the 6.2l or just a fluke
@ADVANCEDLEVELAUTO
6 жыл бұрын
I've actually replaced quite a few broken valve springs on both the 6.2 and 5.4 engines. Thanks for watching!
@andrewt9204
6 жыл бұрын
Seems to be the one Achilles heel with the 6.2. I wonder if an aftermarket, like comp cams, would be a better choice on these...
@Bushy556
3 жыл бұрын
I got triggered by that battery terminal. Holy crap.
@Disco12100
3 жыл бұрын
What state are you located in?
@TheRebelyell666
4 жыл бұрын
At what mileage do these valve springs typically break at?
@stevehpperf2402
3 жыл бұрын
Any. Seen them break under 10000 miles all the way to 250000
@bobmar2540
5 жыл бұрын
Sounds like a ford. Ticking lifters is par.
@loubandini6510
5 жыл бұрын
Thats a fix for how much 💪+👢=$$$$$$$ lol
@ggmichelle9214
5 жыл бұрын
Wyai need u to fix my truck😭😭
@davidwoermansr
2 жыл бұрын
I'm glad I live in a state I can delete the cats
@Nostradamus_Order33
6 жыл бұрын
Skip the scan tool next time.....
@ADVANCEDLEVELAUTO
6 жыл бұрын
I like to show what you would see on the scan tool if you had this problem. Thanks for watching!
@tomsawyer4776
3 жыл бұрын
Over revving the engine causes valves to "float"....breaking and bending valves, and valve springs. Company truck...drive it like you stole it. Bad employees. Possible bad rev limiter.
@stevehpperf2402
3 жыл бұрын
Bullshit. Bad valve springs. I have had this truck since new and oil changed every 3000 to 5000 miles depending on what kinda miles.
Пікірлер: 96