I can appreciate that shows like this are what I grew up on watching on the weekends. But man am I so thankful for better "shows" out there like Vice Grip Garage that are real and authentic. I'll always like Stacey's videos, but all they are is a 20 minute long commercial more or less.
@BoostedPastime
Жыл бұрын
the budget these guys have is usually more than the average joe can afford, love watching smaller channels because sometimes these get depressing, its good to see them tackle more down to earth projects.
@mattshansen9814
Жыл бұрын
Vice grip garage.......... Better.....,..That's your opinion. Stacy David keep up the good work 👍👍👍👍👍👍
@mattshansen9814
Жыл бұрын
Maybe you should boycott the show..... I guarantee you won't be missed...,.
@BackPainGarage
Жыл бұрын
@@mattshansen9814 Neither will you buddy. I'd wipe my ass with your opinion if I could.
@NarfBLAST
7 жыл бұрын
Anyone else at 14:00 think, "But you already have an onboard air compressor?"
@jamesfitz1227
7 жыл бұрын
NarfBLAST yea
@scotts045
4 жыл бұрын
I’d just run lines out the back so I can justify the $1500 air compressor lol
@Goostradamus81
8 жыл бұрын
I understand the aspect of showing what you CAN install in a truck. But there was alot of money spent on the generator/compressor in the back of the bed, why did they then install another compressor for the air bags? When they could just run a dedicated line off the air tank, or just fill nozzles for the bag Also for the few extra dollars of the tiny compressor, why not save that and do a full turbo-back exhaust system. Love the show, just a few odd-ball questions Cheers
@Vincent-ke5zn
Жыл бұрын
Very cool and original design on your project truck
@tobygathergood4990
Жыл бұрын
So far on this build, I figure it's cost somewhere between 12 and 15 thousand $$$ to get there. Living in Canada, this would be at least 50% more than that, and you're adding even more stuff. Your definition of "a fortune" is considerably different than mine, that's for sure.
@wadecookston1605
2 жыл бұрын
When cutting exhaust, you could say, “there’s more than one way to skin a cat(back)” lol
@ghost13829
2 жыл бұрын
love this show man! been watchin ya for many years
@BigPaco213
8 жыл бұрын
Finally a full Episode!!!!!
@colehalford1893
Жыл бұрын
He sounded like my mother when he said “Oh there’s all kinds of stuff to do.” I turned my head and said “Mom?”
@robbanta2979
6 жыл бұрын
“without spending a fourtune”.... ok
@charlesihne3001
3 жыл бұрын
Good for you
@Cpt.BEARDless
Жыл бұрын
@@charlesihne3001 hush child
@sethmarrs3327
7 жыл бұрын
he dropped that exhaust system and walked away like screw it, ill just run it with an open cat.
@royalwins2030
6 жыл бұрын
Seen pics of turbos after many miles with k and n s on them.... didn't look to pretty. Flows more air and more dirt apparently
@trackpackgt877
3 ай бұрын
You're absolutely right about k&n I'll never run them again I had one in my old pickup truck and I send oil samples to Blackstone labs and they kept telling me I had an air intake leak because there's a lot of dirt in the oil I couldn't find an intake leak finally I ditched the K&N and put in a paper filter next Oil sample Blackstone said my oil is clean didn't have a bunch of dirt in it like before that the filter was the problem letting too much through the K&N is not worth the tiny bit of horsepower you get you're losing filtering ability
@armandopatane5343
5 жыл бұрын
Once again you make everything look simple
@davidgenthnerjr4995
8 жыл бұрын
Great video Stacey, been waiting since February for full episodes of season 9 to come out. That big shop crane you use for projects like Heavy Metal, who makes it and how much would I have to dish out for one? I got a 1979 F350 4x4 that needs a cab replaced and heavy flatbed removed and would love to have one so I don't have to borrow a tractor or skid steer with forks.
@jennBourne
6 жыл бұрын
Is it just me or did he add the new lift blocks to the factory lift blocks?
@bassmatt4792
4 жыл бұрын
Wouldn't be a Stacey David automotive tv show without throwing old parts into a pile on the floor
@gt4th
4 жыл бұрын
What happened to the sheet sweeper? You were putting a rear end in it and that's the last thing I can find on it. Awesome build. Dying to see it finished!
@KGeezydad1
8 жыл бұрын
Stacey did you have modify the air lift system since you installed a lift kit?
@contralul
8 жыл бұрын
1.25 speed on the intro sounds perfect
@tobygathergood4990
Жыл бұрын
I'd love to see this done on an old '88 to '92 7.3 IDI naturally aspirated F250, mechanical IP and NO electronics.
@truckersnitemare9354
7 жыл бұрын
I've seen that truck around Texas
@the_w0rkshop419
8 жыл бұрын
Hi +staceydavidsgearz ! Awesome episods ! Lovme the truck even if it don't left much space ! Eon't you think that you should upgrade your cordless drill ? Why don't a usa made DeWALT brushless drill ? Or Makita if you prefer
@diggLincoln
4 жыл бұрын
6.4 powerjoke worst engine of all time
@josephf593
3 жыл бұрын
Your keeping the dpf on the wrong vehicle..
@tylersmith293
Жыл бұрын
Love content. Now you have no bed space.
@hulkincredible3155
8 жыл бұрын
how about doing a 2001 Chevy Blazer zip update 4.3 I'm making a cycling motor I would like to my money hasn't been as their
@bobbymatheson5807
Жыл бұрын
Stacey David is putting things on this truck that people might want to see but at what price ? And Napa is 1 of the most expensive to buy auto parts around ! Just how much where all those tool poxes you but on that truck ? I can guarantee they cost more then average guy can afford ! And along with all the other things you put on this truck !!! A guy like Vice Grip Garage is more based in reality then this !!! Vgg is more of a real man's needs and budget .... this show just reminds me of a rich man's play ground then a reality show on how to build or improve a working man's truck !!!!
@markrich3271
8 жыл бұрын
You would think the oem setup would take in colder air from the fender.
@well_as_an_expert_id_say
7 жыл бұрын
Mark Rich more chance of sucking in mud or water and hydrolocking the closer to the wheel well
@markrich3271
7 жыл бұрын
Didn't think about that your right.
@reneeandchrisforever
2 жыл бұрын
So much $$ sunk into the worst diesel ever made. But hey, it’ll look nice on the rollback lol.
@shaun710
Жыл бұрын
My thoughts exactly
@Maleekus
Жыл бұрын
it's common knowledge, or so I thought, that the 6.2L GM diesel was the worst diesel ever made
@zachtheripper124
4 жыл бұрын
Lol. 120 horsepower and 240 torque with a tuner? If only it were true.
@waynes.2983
Жыл бұрын
K&N's are for racing because they let dirt pass pretty badly. In racing that's ok because engines are rebuilt regularly. Don't use K&N in your daily driver.
@mamoudoundiaye9788
5 жыл бұрын
Why he called him Steve Erwin
@peterdragon6367
Жыл бұрын
Wish it wasn’t a 6.4
@zacharygras
7 жыл бұрын
Best way to get the exhuast off on bolt everything and kick the shit out of it works everytime
@joebufford2972
9 ай бұрын
All of the way Stacy was doing a makeover on his brother pick up. It's like dudes. You got to change this and that and then you get some chicks!
@Grainsauce
7 жыл бұрын
Ya there is no way you get 15hp from any k&n air intake maybe 5 at the most!
@richardthompson5313
5 жыл бұрын
no one can afford this stuff get real who has 40,000 to put on a 7 yo truck
Пікірлер: 51