Good video, you did forget to put your backing plate on though
@Spotty1robjbrown
6 жыл бұрын
lunch to the box haha...I didn't forget...those things are worthless.lol. I took them off years ago
@jeffsmithfpv
7 жыл бұрын
I've got a 2006 Ford F-350 RWD Trying to get the hub off but having a hard time. Took off brake caliper and broke loose tie rod. But I'm not seeing how the hub comes off. Any tips?
@Spotty1robjbrown
7 жыл бұрын
jeff smith kzitem.info/news/bejne/0IuFx46QgaNom6Q watch this video first.of you feel behind the backing plate.tool have to spin the axle to get to each bolt.but they are on the reverse side of the backing plate.inside the cut away for the wheel seal
@artwhitting1681
6 жыл бұрын
Thanks for the video. I will not do this myself, but how do you knwo when it's time to change those front leaf springs?
@Spotty1robjbrown
6 жыл бұрын
the f250 had about 300000 miles of hard work and hualing on her...they were really sloppy down the road. it was time! lol
@artwhitting1681
6 жыл бұрын
Thanks for the comeback M front end is bouncing up and down way more than before at 260K. Most of the front end has been replaced - except the springs. They are beyond flat. I think it's time. cheers
@Spotty1robjbrown
6 жыл бұрын
np! yes mine had lost a lot of flex and were flattened out also. thats a good sign its time! can be dangerous also too sloppy and the can get death wobble or death bounce on highway. be safe my friend good luck!
@anthonyschmidt8886
6 жыл бұрын
I have an 01' F250 that is leaning towards the driver side in the front. Could bad leaf springs attribute to this? only 125k miles on it but it was sitting for years before i aquired it
@Spotty1robjbrown
6 жыл бұрын
Anthony Schmidt sometimes they will have one broken leaf..have you looked for a cracked shackle or broken leaf? I'd it's sagging real bad to one side is give her a good look over..could be dangerous!
@anthonyschmidt8886
6 жыл бұрын
Spotty1robjbrown i will have to look when i get home and i’ll let you know what i find
@flocksofseagullsss
5 жыл бұрын
Those knuckle seals can be tapped on gently with grease a brass hammer
Пікірлер: 14