Hey all! Today I'am fitting the Paint Modz aerial that i got from Ford Fair 2019. I hope you enjoy this video! ** Music - SFX - www.audioblocks.com www.Bensounds.com
Danke für das Tolle Video 👍👍 jetzt weiß ich wie die Antenne ausbaue.😊
@FF04ORD
2 жыл бұрын
Toll :) kein Problem, freut mich, dass das Video geholfen hat - Ich hoffe, das lässt sich gut übersetzen
@DanielDebenham
5 жыл бұрын
Great vlog mate loved it. 👍
@zaink7037
5 жыл бұрын
Hey I just wanted to ask you where did you get your plate holders from? Are those the dezentofix ones? I bought those for my zetec s but I'm worried as the top tabs aren't clicking in. Really will appreciate help and and if you improvised anywhere. The side and bottom tabs don't come out but it's just the top. Thanks👍
@FF04ORD
5 жыл бұрын
Yeah they are and i think it was ebay? I bought them as i didnt want to drill the plates or just use stick tape and not keen on the thick plastic surrounds. If i remember i put the sticky pads on the rear but didnt remove the tape (to the sticky side) so that it brought the plate forward as mine are metal pressed so thinner than the standard plastic and it was abit loose in the surround. iam sure they just slide down in place and then just push the top plastic tabs over the plate.
@zaink7037
5 жыл бұрын
@@FF04ORD okay 👍. With my plates there is a slight gap from the top which may explain why it's not going over the top tabs. With the front holder I drilled a few holes in then put the plate in the holder but because the front bumper is curved that doesn't help and it causes the top tabs to go behind the plate. I put double sided tape on the springs in the front holder which I think has helped it. As it hasn't moved for the several days I've had it on. The rear plate I put two sticky pads both sides so it sits level but no pads on the holder itself to secure the plate on. Recently I noticed the top tabs on the rear to pop off and go behind the plate. I'm sure the plate won't fall off as the bottom and side tabs are holding it but wanted to ask to be sure 👍.
@zaink7037
5 жыл бұрын
@@FF04ORD could I ask how you put your front holder on? Looks like it's straight on your car 😅
@FF04ORD
5 жыл бұрын
Zain K both plates are straight. You can’t curve the surround to follow the front bumper. They just slot in place with just the pads on the front. Hope you sort it
@DannyLFC186
3 жыл бұрын
Is it possible to 'unscrew' the antenna from the base? I'm trying to put a surfboard on the rack of my fiesta..
@FF04ORD
3 жыл бұрын
Yes you should be able to do this unless it has rusted/fused together over time
@R23OWL
5 жыл бұрын
Superb video as always mate honestly! Great guide for anyone else who wants to do it too! I do like the gloss black base, that with my short ariel 👀
@FF04ORD
5 жыл бұрын
Yeah go for it!
@James-mc1iu
Жыл бұрын
Is it nearly the same process for a ford fusion 2003?
@FF04ORD
Жыл бұрын
I believe so
@James-mc1iu
Жыл бұрын
I used a flat screw & cross screw and 25 torx.
@dannylivings2539
3 жыл бұрын
Hi do you have a link for this Aerial?
@winstonnorman7590
4 жыл бұрын
Just done this on my ST, your guide was helpful cheers bud, paint modz did a grand job. Question for you, just replaced my main interior light with an Osram LED but it stays dimly lit when off, do you have this issue with your bulb?
@FF04ORD
4 жыл бұрын
Winston Norman thanks mate, you mean the interior light with the long bulb type, no but I’ve heard some bulbs react funny if backwards. Try trying it the other way round.
@winstonnorman7590
4 жыл бұрын
FF04ORD cheers mate, yeah main interior light, it’s a 36mm festoon bulb, I’ll give it a try the other way but think they only work one way due to polarity on these. If yours doesn’t do it I think I’ll grab one, do you remember where you got it? Just read a thread where someone went through loads of different types and all stayed dimly lit when off so sounds like you got lucky lol! Quality channel by the way, got a new sub mate
@FF04ORD
4 жыл бұрын
Winston Norman if I remember (as just noticed it’s red on the video) I got the bulb (with some others) from autobeam.co.uk. I warn ya they not cheap but they are quality and come with a 5yr warranty I believe. Sure they do cheaper ones too though. Thanks mate good to hear.. just quiet at mo as hard to do stuff at winter time.
@winstonnorman7590
4 жыл бұрын
FF04ORD Top man! Happy to pay for quality, just ordered one and added some numberplate lights too. Don’t seem too bad on pricing, paid the same for the Osram which is now useless lol!
Пікірлер: 24