Here's a quick tip for anyone doing this for the first time- wash the grill with warm water first - makes it so much easier!!
@minnsminns
6 жыл бұрын
Thanks! Gave me the confidence to just yank it out. No broken clips. Easy. :)
@Garmashua
6 жыл бұрын
There are broken (
@trdshortbus8009
7 жыл бұрын
ahh i get it, hes reaching up inside pulling down and out at the same time to get the clips to release
@3abdangry
2 жыл бұрын
I just did this on my zetec 2015 UK version, it really needs brute force and will damage your old one for sure but since iam upgrading my grill it didn't matter to me.
@Josh-vo6yk
Жыл бұрын
Did you add the front bumper spoiler? If not I’d like to see what it looks like without it possible
@3abdangry
Жыл бұрын
@@Josh-vo6yk don't understand what spoiler has to do with grill, just did grill replacement from the old chrome lined design to new honeycomb one
@3abdangry
Жыл бұрын
@@Josh-vo6yk haven't put it if you mean the extra lip underneath. will put it in future for sure for now it looks much better with honeycomb black on black
@Josh-vo6yk
Жыл бұрын
@@3abdangry do you have instagram by any chance, I’d like to see pictures of it without it as that’s likely what mine will end up like
@3abdangry
Жыл бұрын
@@Josh-vo6yk don't have insta but i posted a picture of it on my channel community tab
@JAYBLACK35
8 жыл бұрын
this video is the closet thing i can find to removing my 2013 ford fusion grill. they're pretty much the same thing im wondering will this work.
@overknight5278
4 жыл бұрын
Jay black did it work???
@manuhonkanen2111
3 жыл бұрын
How did it go?
@JAYBLACK35
3 жыл бұрын
@@overknight5278 it was a no go. Pretty much have to snap off the clips on the inside 🙄
@JAYBLACK35
3 жыл бұрын
@@manuhonkanen2111 I just left it as is. Too much of a hassle
@overknight5278
3 жыл бұрын
@@JAYBLACK35 🤣 too late, i ended up removing my front bumper. Its alright though, it’ll be easier this second time around, gotta add an intercooler and a thermostat upgrade, on stock radiator and remove the grill shutters 🤣
@Hoodratliker
5 жыл бұрын
In USA the license plate frame that is riveted on must first be taken off. Pain.
@punkrock1989
Жыл бұрын
Just so people know, this will destroy the grill and you won't be able to put it back on properly. Unless u have a new grill then you don't want to do this.
@groundcontrolto
Жыл бұрын
My grille was damaged after a pheasant ran out of a bush in front of my car. Made it a bit trickier as there wasn't much to hold on to. It did essentially work as the video showed. You can lever down some of the tabs but you do just have to yank it. Didnt do any damage to the bumper but did break the grille further. Not bothered about that as it was already broken.
@B8sean
5 жыл бұрын
Hey, just wondering if your account is still active i have a few questions
@sueski3272
3 жыл бұрын
BRAVO !!! IT'S SO SIMPLY ?..so by power ? ... but not inteligence ????
@tautliners
6 жыл бұрын
Whatever happened to using screws.
@salvatoresanciolo1038
2 жыл бұрын
It ise possible to do the same procedure with the ford puma mk2? Tancks
@martinortiz7813
4 жыл бұрын
Como se saca el del fiesta kinetic 2012???? Tenes algún vídeo??Saludos
@granceadan
7 жыл бұрын
can u do same on 2015 C-Max SEL Hybrid?
@charlieduncan727
6 жыл бұрын
Would this work on a ford fiesta 2013 1.0 ecoboost?
@ilhan6015
3 жыл бұрын
Did it work?
@blackfire3688
4 жыл бұрын
Why did you make it look so easy
@Zhine
3 жыл бұрын
Mine won’t work
@autobez3132
3 жыл бұрын
With my luck I brake all the clips 🚗 🚘
@magaliinsaurralde6229
6 жыл бұрын
Puedes publicar un video de cómo instalar el logo ST en parrilla de ford ka 2018 Me seria muy útil gracias
@gabrielrocha6815
5 жыл бұрын
No ves que es de europa, alla no existe el ka
@djnelekk
5 жыл бұрын
@@gabrielrocha6815 claro que existe el Ka en Europa.
@djnelekk
5 жыл бұрын
Hay que ser cutre para instalar el logo de ST en un Ka
@gabrielrocha6815
5 жыл бұрын
@@djnelekk la nueva versión? Acá en Arg salió en 2016 y en 2019 salió otra versión más.
@DocThizzz
8 жыл бұрын
So its just clips? It wont cause any damage just pulling on it like that? Is it the same process for inserting the new custom grill, by just pushing the clips in?
@marcomendez7001
8 жыл бұрын
I've been trying to figure that out too. that chrome grill annoys the fuck out of me dude
@SinistaProductions
8 жыл бұрын
Marco Mendez I did this and completely broke the chrome grill into pieces, didn't mind though as I was putting the honeycomb grill on anyway. If you want to keep the grill for any reason I wouldn't risk it, just take the front end bumper off and do it the proper way
@shielynpettey7925
5 жыл бұрын
SinistaUK i don’t know if you’re still active,but where do you get a honeycomb grille? Is from the st? Does it fit right on without modifying it?
@G.G.Explores
5 жыл бұрын
@@shielynpettey7925 look on Amazon
@shielynpettey7925
5 жыл бұрын
GangsterG is it a direct fit?
@_Thirtyseven_
8 жыл бұрын
Will this work on a 2016 focus s? I'm trying to paint the silver chrome piece around the grill. I know it has the active shutters so will that interfere?
@will8677
8 жыл бұрын
Did you ever figure this out? I want to put a different grille on my focus '16 focus and I'm wondering if this is a viable option for a focus. Thanks, bud.
@_Thirtyseven_
8 жыл бұрын
+will8677 I ended up just painting the chrome with plasti dip. I do have a friend that works at car toys and he said he believes it's just pressure clips holding it on. I didn't try to yank on it though. Good luck!
@DJPacoRamirez
8 жыл бұрын
Michael Torres lol I just plasti dip mine today
@alejandroleme
6 жыл бұрын
hi, where was that Ford Fiesta made? Mexico, Brazil or Europe??
@gabrielrocha6815
5 жыл бұрын
Quien es el chanta de baradel en la foto? Jaaajaj
@arturoespinoza6975
7 жыл бұрын
Will this work on a 2015 Fiesta se?
@fordtuning4431
7 жыл бұрын
Of course
@arturoespinoza6975
7 жыл бұрын
Also would a 2015 Fiesta st rear bumper fit on a se?
@fordtuning4431
7 жыл бұрын
Arturo Espinoza yes
@danielhumphries4595
6 жыл бұрын
is this the same for a 2016 plate?
@brettanys2107
5 жыл бұрын
I have a 16 did you end up yanking it out?
@fexil7567
4 жыл бұрын
Alguien sabría dónde pillar la parrilla negra en España ( tengo un 1.0 sport y un tipo aparcando con una bola de remolque me hizo polvo la parrilla), en concesionario cuesta unos 150 ñapos. Me parece un poco caro para un trozo de plástico. Agradecería la ayuda 😉
@groskle52
3 жыл бұрын
Yo ando buscando por desguaces pero está complicado, lo mejor aliexpress
@fexil7567
3 жыл бұрын
@@groskle52 al final la compre original. 160 ñapos por un trozo de plástico. Cambiarla lleva su historia pero no es difícil 😉
@johno4521
2 жыл бұрын
Looks very fragile....
@jarekreiko
7 жыл бұрын
i just cant take it out like this.
@Zhine
3 жыл бұрын
Me either
@thementor9249
4 жыл бұрын
Hello . is the ambiant temperature sensor located behind the front grille ?
@manuhonkanen2111
3 жыл бұрын
Yes. Just left to the car to the grill he uninstalled on the video
@macster1457
7 жыл бұрын
that grille is made out of cheap plastic..very flimsy.. each of those strips in the middle section costs $70... what a rip off.
Пікірлер: 68