Installer for 32 yrs and i can tell a real old school installer and you are that guy. Keep up the great work.
@watercarepro9610
5 жыл бұрын
It's nice to see someone take pride in their work, even though most of my plumbing work was in basements or crawlspaces, and not very many people would see my work, I still took time to put a level on every piece of copper, and wipe any solder joint that might drop. You just don't see the younger generation taking pride in anything they do. Great job, you are a true professional !!
@JoeMama-ss2nh
4 жыл бұрын
ok boomer
@bigelile07
4 жыл бұрын
@@JoeMama-ss2nh Sorry to tell you, but the catchphrase "OK Boomer" has already played out.
Incase you missed it...he left his other battery at another shop! LOL, keep up the awesome work brother.
@bigsmooshflopdong33
Жыл бұрын
Fellow autoglass technician here, been doing it for about 7 years now. Just found your page today and it is awesome to see another installer doing things the right way. I see so much sloppy and dangerous work on a daily basis, just nice to watch someone taking the effort to do things correctly. What is that glass stand!? It's pure wizardry compared to my basic cradle.
@billrau2398
3 ай бұрын
Very professional Nate organized above standards & step-by-step process A+ installer 👍🏼
@bryannll105
5 жыл бұрын
I love coming and watching your videos just for the simple fact you run urethane on that glass so smoothly lol
@mariobaturina3374
Жыл бұрын
Best work i have seen yet. I would rate this 10 out of 10. It was real joy to watch this. I wish you all the best and keep on like that. Respect
@wicybertrucker
5 жыл бұрын
Thanks, makes me want to out source my window work I need done. Hopefully I find someone as good as him.
@karljokkerlukkas_974
3 жыл бұрын
Good job, Luís!! Love to see a good Auto Glass Professional. Keep on the Good work. From Lisbon, Portugal, EU. An Auto Glass colleague.
@bluemonkey227
6 жыл бұрын
I’m glad I’m not the only Tech that likes to spin tools in my hands. I’m sure it makes me work faster
@graceperdomo-l2h
Ай бұрын
Todo excelente. El único punto a evitar seria limpiar el cristal a montar y luego sacudir el polvo hacia el cristal que ya haz preparado
@MrANDRESON69
5 жыл бұрын
MUY BUEN VIDEO MUY ORDENADO Y LIMPIO TU TRABAJO... FELICIDADES.
@HardKnocks160s
3 жыл бұрын
I love that p2g sika urethane it works real good
@lensmanicfeleven1847
10 ай бұрын
...Good video and Excellent presentation....Thank you...
@jacintoherrera649
5 жыл бұрын
Profesional.
@leanette999
6 жыл бұрын
I wish you worked on my windshield. I had Safelite do mine and the trim they used was not pushed down on the corners and they left a half inch gape at the top of the windshield. I called them and they said it won't leak.
@slawomiradamczyk8922
5 жыл бұрын
Cos it won't.Trim on the screen is not a sealer(usually),it's more cosmetic."Gap"is a result of glass quality,it is simply badly manufactured ,cheaper to buy...it's all about profit.Good luck
@VehVeloMedia
5 жыл бұрын
Awesome video. I dont agree with using that brush on the cars paint job but still a good video
@73powerstroke56
4 жыл бұрын
It's a soft bristled brush. The bristles look course but the tips are actually soft almost like cotton.
@elnownetwork
4 жыл бұрын
Very professional 👍
@murugesanmurugesananu5188
3 ай бұрын
Super job
@Triscuitwells
4 жыл бұрын
I wonder why he isn't using his power tools, something must of happened to his battery.
@davidvillalva7837
4 жыл бұрын
Increíble papá
@kadireraslan8505
2 жыл бұрын
Very nice job! Thks you sir.
@mikkel137
Жыл бұрын
What is that setting tool The one you rested your elbow on when installing the glass?
@floridahype3369
3 жыл бұрын
What gloves do you have on? They look nice
@WindshieldWonder
6 жыл бұрын
Where is your shop bud..
@garyp1930
Жыл бұрын
Amazing
@ranjanchathuranga7690
3 жыл бұрын
Super be happy...
@danielsantamaria9548
3 жыл бұрын
Old school isnt always right. I do pray to god there is bare minimum aktivator on that glass.
@ayungchannel
4 жыл бұрын
Nice good jog master
@DjTeddyGram1
Жыл бұрын
Amazon link for this removal kit ?
@markw6464
5 жыл бұрын
You do good work
@LuisSanchez-se8pz
Жыл бұрын
Yo tengo un bmw 528 2013 el cristal del frente esta roto cuanto vale
@skip741x3
2 жыл бұрын
Have an important question: we just had a local winshield repair do our ford focus se wagon 2003 .. there were 2 different part numbers for the glass..we had a 1459 in there and wanted the same.. he was unable to get that part and used an alternative part 1859 made by FYG..this was acoustic glass so we said,sure as long as it fits..he installs it and fit seemed ok Except for the top seam...whereas ur fitment has the top seated flush , his fit has the winsheild sitting about 1/8-1/4" higher than the car body..It looks odd and is only occuring at the top..When I asked him about this, he said "oh thats completely normal, happens all the time"...is this something we should be concerned about? should we have him redo it? personally, I think the alternate windshield may be alittle off.. what do you suggest? why is it not seating down flush at the top? thanks for any help!
@dennisriddle197
2 жыл бұрын
It’s just how some aftermarket Chinese glass fits, this body style Focus was bad about that at the top, I always run a extra tall bead of glue and tape all the way across the top down good until the urethane dries. FYG glass is crap to start with. They’re not the greatest fitting glass on the market from my experience, been doing auto glass for 30 years now.
@ryaniely.9548
2 жыл бұрын
picky... lol jk.
@abdulsattaral-janabi6003
6 жыл бұрын
Very nice Job
@이민-q2d
2 жыл бұрын
Where can I buy the same section cup Ao in the video??
@ericlecorney1144
5 жыл бұрын
Is twere a difference between the two blades on the yellow cutters?
@Oness2024
3 жыл бұрын
How long does it take for the glue to dry
@Jpcars636
Жыл бұрын
Risky brushing bonnet if there’s any fragments of glass scratch paintwork use air line best way
@nissan280zfairlady
5 жыл бұрын
Quick question if anyone can answer it . Can I remove the seal on the side of the windshield and install a new one ?
@slawomiradamczyk8922
5 жыл бұрын
Hi Jona Its depend on make n model, I can tell You one thing...it is not a sealer,urethane(glue) seals the screen.Trims+rubbers on the side or top are usually clip in ,pushed in or glued in. If its glued in You may have to remove n refit windcreen.if sits in clips or runners You can replace them allright.All d best
@brownpride5125
6 жыл бұрын
Thanks ! You are Goodyear!👍
@jamiegaskell8097
3 жыл бұрын
hey mate, that windscreen stand do you know where to get them?
@airsoftwarrior4027
5 жыл бұрын
Where can i find the shapener that you used on the cold knife blade?
@fulanito494
6 жыл бұрын
You should have replaced the butyl tape. When raining all the water from the windshield will go down enter underneath the cowl, get into the pollen filter, soak it and finally get into the passenger feet well. Have seen it on many focus of this gen.
@BigDaddyThrock
5 жыл бұрын
Fulanito what I do is seal it with a bead of urethane, works well
@Benzyl
3 жыл бұрын
Yeah, that old butyl tape gets pretty mashed up and non stick after it's been abused by the usual idiots taking short cuts changing the cabin filter. The worst leaks I've had on a Ford have usually come from that area after a few years.
@Gayboi-n6g
Жыл бұрын
@@Benzyl if it started to leak after a few years, it’s a rust problem for sure.
@Gayboi-n6g
Жыл бұрын
There is no butyl tape on these cars bro! It’s urethane only
@toretophoenix
10 ай бұрын
Why are you say the bottle piece if you put the right windshield come with that piece
@anthonytiedt8725
4 жыл бұрын
Have you ever used the m12 urethane gun? If so how did you like it ?
@Tempsho
4 жыл бұрын
That's what I use. They work great. I used to have the Dewalt 18V XRP, but the M12 gun is smaller and lighter. I highly recommend it.
@AtlanticTransportation
6 жыл бұрын
What kind of camera do you use
@dasaxophonist
2 жыл бұрын
Is there a way to replace just the top molding? The installer I had didn't do a great job
@Gayboi-n6g
Жыл бұрын
What kind of car?
@dasaxophonist
Жыл бұрын
@RonnyDonny2024 honda civic 2014
@johnnawrocki4079
7 жыл бұрын
cowl is pretty good shape
@eddieramirez6708
4 жыл бұрын
Louis old school no tienes que usar herramienta eléctrica sólo de mano como la gluegan
@Belanti1986
6 жыл бұрын
pregunta luis ese producto negro que aplicaste con isopo en el sector donde quedo la pintura y no la goma que es?
@vdkarautoglassreplacement3642
6 жыл бұрын
QUE GLUE USAS TU
@vdkarautoglassreplacement3642
6 жыл бұрын
YO USO KIKA MACH 60..Y EL LIQUIDO NEGRO ES PRIMER 207 SIKA PARA CUBRIR LA AREAS DE RAYONES Y DELAMINACION DE LA PINTURA PARA NO DEJAR EXPUESTA Y PRESENTAR PROBLEMAS DE OXIDACION DESPUES
@vdkarautoglassreplacement3642
6 жыл бұрын
AHI TENDRIAS QUE PREGUNTAR CON TU DISTRIBUIDOR DE SIKA QUE PRIMER PUEDES OCUPAR PARA EL 256
@exOtikFPS
6 жыл бұрын
What is this yellow tool and where to buy it ? Also, is it possible to remove the winshield without damaging it ? (i noticed it cracked on a corner. Im asking cuz I need to remove an undamaged winshield from a car to put it on another one ^^)
@emanueliancu
6 жыл бұрын
I did remove one 2 days ago. It's harder trying not to damage it but you can still do it with fishing wire..
@charlierosene1117
6 жыл бұрын
you need a reciprocating saw and an Equalizer blade. See here: btbtools.com/index.php/ehl187.html
@charlesmiller7861
3 ай бұрын
Pro
@lgu400angus
4 жыл бұрын
Why did you not prime the glass??
@Loudd2v
3 жыл бұрын
He's using sika primerless to glass all you have to do is decontaminate the windshield
@joecavendish5235
3 жыл бұрын
@@Loudd2v I'm searching everywhere for an answer, I only need to replace the windscreen seal ( rust problems). But can't find any info on applying the new seal to the windscreen.. does that get glued together? Or simply pressed together, then have sealant holding everything to the windscreen frame?
@mabast007
5 жыл бұрын
What brand of urethane are you using?
@jon4915
3 жыл бұрын
It's sikaflex. Sika branded stuff is used a lot at the manufacturing plants when they build your car. Expensive, but it's the highest quality you can buy.
@HardKnocks160s
3 жыл бұрын
P2g sika flex urethane good stuff works great
@tonybrit2k
5 жыл бұрын
P2G plus ?
@austinjefferys4267
5 жыл бұрын
I want to go to his shop
@jesuscarrillo9389
3 жыл бұрын
It’s funny how he said we can put our own car mirror back in the car yet he took it off that’s his job to put it back on tf.
@abdellahessabiri1424
6 жыл бұрын
Where do I find this equipment? plz
@vdkarautoglassreplacement3642
6 жыл бұрын
Abdellah Essabiri wich one?
@abdellahessabiri1424
6 жыл бұрын
suction glass ?
@charlierosene1117
6 жыл бұрын
monumenttools.net/products.php Monument Cold Cut Knife. Check ebay too
@محمدمجاهد-ع9ه
6 жыл бұрын
الله عليك
@philjohnson1023
2 жыл бұрын
Didn't even cover the dash with protection. Using a chisel instead of the right thin blade. stepping all over the door trim wrecking it. Dreadful
@mabast007
4 жыл бұрын
Why are you covering the engine bay?
@poilmaster
3 жыл бұрын
So tools don't fall inside ;)
@Carlos-wl3dd
3 жыл бұрын
I wouldnt want you dusting my car off with that duster scratching my paint
@lovingvickky
5 жыл бұрын
I appreciate your skills and hard work, but I don’t like that you placed your tools on new to be installed windshield, it could’ve scratched it.
@deriangueldner23
Жыл бұрын
Crazy to see you older guys handsetting like that so east
@richardstanton2474
Жыл бұрын
anybody notice he fitted the wrong screen?
@user-guestkid563
6 жыл бұрын
EN 15 MINUTOS HAGO ESE VIDRIO MUCHO PROTOCOLO PARA HACER TUS VIDRIOS 7 VECES USASTE TU CEPILLO PARA LIMPIAR EL MISMO LUGR Q YA ESTABA LIMPIO
@jesus7722
5 жыл бұрын
Upload a video
@jimmyjhonson4590
5 жыл бұрын
Calmate speedy gonzalez
@eddy8698
5 жыл бұрын
Wincheras corta y larga, navaja larga, cortar el glue limpiar con glass cleaner primer en toda la orilla glue y vámonos. Sin quitar plato jeje.
@iiZeiiko
4 жыл бұрын
Nice to see you primed the glass 🙄
@ozgurlugeyolculuk3627
6 жыл бұрын
Amg bizim burdakiler kasap resmen
@patilautoglasskavtyamahaka1264
Жыл бұрын
Patil auto glass subscriber
@imcharliebrown.
2 ай бұрын
This guy is doing too much and needs to be fired ASAP
@keithjohnson1403
3 жыл бұрын
Check out HackOPS in ebay those tools will help you out.
@johntalanquines5862
3 жыл бұрын
U
@AutoglassAutoglass
4 жыл бұрын
I wish you didn't talk that much
@bobphillips1027
4 жыл бұрын
Meh..I've seen better.
@cgvlogs487
5 жыл бұрын
Could this be done with out installing that bottom mold piece ?
@fuckvevobitches
5 жыл бұрын
No will leak into the cabin air filter and eventually inside
Пікірлер: 110