THANK YOU BROTHER. i HAVE A 2015 FOCUS SE AND HAVE BEEN WATCHING YOUR VIDEOS SINCE i HAD FORD TRY AND SCREW ME AND SAY MY CLUCH WAS BROKEN
@BigBensCarsAndCycles
12 күн бұрын
@@robbheinz6633 you're welcome! I'm glad the videos helped!
@paschakramer7273
4 ай бұрын
One of the best videos I ever saw. Amazing explanation, video, voice and knowledge. Thanks so many times. Helped me 200%
@jamilrasheed2083
4 ай бұрын
I love the way you explain the instructions, I just wish this was for a 2012 Ford fusion sel. Thanks for posting the video. It was still helpful for me!
@BigBensCarsAndCycles
4 ай бұрын
I own a 2007 fusion and I'm looking right now. I think my video for Ford Edge (or explorer) battery terminal replacement will help you. It shows how to replace the crimped on terminals
@kevinm.8682
8 ай бұрын
Wow, all this just to replace a battery! I miss my '95 Ranger. That was a 3 minute replacement.... Thanks for the detailed explanation. It made a world of difference.
@BigBensCarsAndCycles
8 ай бұрын
You're very welcome! 👍
@elamonty
6 ай бұрын
Thank you for taking the time to make this video. My sister's local Ford dealership wants $600 to do that. 😞 I am 100% confident I can do everything for my sister except for I don't have a way to clear all the coats and stuff if they pop up.
@BigBensCarsAndCycles
6 ай бұрын
Hey, I'm glad it helped! Any cheap scan tool can clear codes
@elamonty
6 ай бұрын
@@BigBensCarsAndCycles I truly do appreciate you taking the time to answer everyone's questions, and make such a detailed video. You have my utmost appreciation and I hope things are going well for you!
@frenchkey
2 ай бұрын
Great job. Even the box under battery is left dirty
@batznbratz
2 ай бұрын
This is helpful my bfs 2018 had the wipers go crazy out of no where, and the negative terminal in the back had corroded everywhere
@gorillafsoccer
3 ай бұрын
absolutely amazing video you are saving lives out here
@strophish
8 ай бұрын
Simply open the box, unhook the battery, lift to unclip the front wall of the battery box and slide out the battery. 5 minutes.
@jesseives1748
7 ай бұрын
Tyty
@strophish
7 ай бұрын
My pleasure! Merry Christmas!
@iamwhoiam7887
3 ай бұрын
don't you have to move all that crack (i.e. airbox, air intake) out of the way? i just had my battery replaced by AAA and i think the guy didn't torque the negative cable all the way down. i say this because sometimes my car won't start or micro-dies while driving and i've found pushing down on the negative cable fixes it for some reason. it's so odd.
@KaKa-ol9ep
3 ай бұрын
Yeas, I did this without removing airfilter. It's hell hard. I beat my fingers and scratch battery. It's possible of course but not easy and not 5 minutes. Good luck)
@terrykassem275
6 ай бұрын
Hello and thanks for your elaborate work and help on the Ford Focus! I have a 2014 Ford Focus SE, it cranks slowwwwly and never starts. It turns maybe for 4-5 turns then stops turning. I've replaced the 50A fuse, replaced the battery and starter. Nothing! It seems like it has spark, after testing one the spark plug, i haven't checked the fuel pressure yet but had attempted using starting fluid and I'm puzzled as to why it's cranking so slow even with a new starter and battery? Any help and guidance is appreciated! Thank you!
@BigBensCarsAndCycles
6 ай бұрын
Hi, I'd be happy to help. Can you make a short video of trying to start it, and post it in my discord or Facebook group? Along with any fault codes you have
@sykoap7787
Ай бұрын
Wow he’s so strong 😂
@slickwillie3759
4 ай бұрын
Great video Thanks
@Cfchild1
10 ай бұрын
Great videos for the Focus owner! Question: Is it necessary to be required to reset the BMS through a scan tool only if you have replaced the battery?
@BigBensCarsAndCycles
10 ай бұрын
Thanks, glad to help. You aren't required to reset bms when replacing the battery, but it's a good idea to especially if the old one was totally shot
@chrisa8863
3 ай бұрын
Holy cow is that white residue the dried battery acid along the prongs?? 😂
@schmick63
9 ай бұрын
My current project Focus has a bunch of seemingly unrelated codes. Worst is the P090C Clutch B Control Circuit low which prevents Reverse and 2/4/6 from engaging. Have swapped the actuators around and no change in codes. What's odd is that when the car is started from cold, all the gears including S can be engaged, however after 5 mins of idling the car will no longer go into S and Reverse does not work either. I also have code U0131:00 - Lost comms with Power Steering control module, even though the power steering works fine. This particular Focus is fitted with the 1.6 that's normally found in the Fiesta (entry level Focus in Australia) as and also has hydraulic power steer.
@BigBensCarsAndCycles
9 ай бұрын
Gotcha. Sounds like a tcm problem.
@schmick63
9 ай бұрын
Thanks for the reply. I have it booked at the dealer on Thursday so fingers crossed I can get a free TCM@@BigBensCarsAndCycles
@BigBensCarsAndCycles
9 ай бұрын
@schmick63 you're welcome. I know my reply was pretty short lol but yeah sounds like an interesting car. We don't have a 1.6L focus in the US. And none with a hydraulic rack.
@schmick63
9 ай бұрын
@@BigBensCarsAndCycles Found out today with this TCM code P090C that if you start the car when cold and put it straight into S mode, it drives fine with no issues. If you put it in D, you get about 3 mins of normal driving and then gears 2/4/6 and reverse no longer work. The 'S' gear also becomes unselectable on the dash cluster. Its at the dealer today hopefully for a new TCM, will be interesting to see what they 'find'
@Jesse-ys8wu
4 ай бұрын
Looking at cables on RockAuto. Anyone know the recommend cable length for 18 Focus SE? Thanks. Car went two days ago and think this made my trans stop. Low acceleration and no reverse.
@rrabon84
3 ай бұрын
Hi thanks for the video, i have 2012 ford focus and has steering issues it says steering assist failure and low battery message pop up. Is there a possibility of steering assist failure due to low battery?
@BigBensCarsAndCycles
3 ай бұрын
Yes, that can be caused by low voltage.
@brandontucker112
2 ай бұрын
The white wire when replacing the + terminal wire, Where does it connect too? I was told it’s a fusable link but I can’t tell in your video. My car radio pops on real quick then says “system off to save battery” New battery, new alternator, fuses good, battery voltage all within correct limits 14.0v turned on 12.4 turned off. Any and all insight I appreciate hell I’ll pay you for help lol
@BigBensCarsAndCycles
2 ай бұрын
That white wire is just a basic wire, no link in it that I'm aware of. You might want to check for corrosion damage do the battery monitor sensor on the negative terminal. Also try resetting the battery monitor sensor with forscan. OK hope that helps, that'll be $1,000 😃
@brandontucker112
2 ай бұрын
@@BigBensCarsAndCycles soooo BMS reset and no corrosion noticed.... any others lol
@robertgraham1626
5 ай бұрын
Good video. Currently have an issue with my 2012 focus, ran it up to the city early morning through slush ice and a little bit of snow came home that night parked it everything was fine went out to start at the next morning all the dash lights came on but not crank would not start and gave me a backup prompt on the dash and the park neutral drive indicator digital read on the dashboard does not Circle the position of the gear selector
@BigBensCarsAndCycles
5 ай бұрын
Check for codes u0100 u0101 which would indicate a tcm problem
@jorgergonzalezvisualartist8925
9 ай бұрын
Would a bad negative battery sensor cable give problems towards the fan motor not turning on? Also since I’m having to replace the whole negative cable with the sensor and the cable that goes into the firewall, I think not sure where it connects to? Could you use the information. Thank you.
@BigBensCarsAndCycles
9 ай бұрын
The focus negative cable doesn't go into the firewall. I've got a Facebook group you can post this question at and add a picture if you can. Link is on my channel page
@jorgergonzalezvisualartist8925
9 ай бұрын
@@BigBensCarsAndCycles Thank so much for the response, I’m just going to splice it like you showed on your other video. Seems is underneath the actual battery box and really don’t want to take the whole car apart. Thanks again!
@aravindanalin4857
6 ай бұрын
Hi ben, thanks for the all video's. I git issue with my 2012 focus. Car not starting after overnight parking. I replced the battery but still same . Got fault code p0702 so is it due to the battery cable or TCM. What should be the resistence of the good positive cable. Can you give me advuce for this..
@BigBensCarsAndCycles
6 ай бұрын
Hi, thanks for watching! With the engine running, check voltage drop of the cable by putting the positive meter lead on the positive post, and negative on that 13mm nut holding the cable on the other side inside the battery box. Should be close to 0 volts being lost
@aravindanalin4857
6 ай бұрын
@@BigBensCarsAndCycles I did that got 0.003v so is it mean TCM faulty ? So will faulty drain the battery ? Because my battery always getting down to 10.3v after stop the car
@BigBensCarsAndCycles
6 ай бұрын
@aravindanalin4857 yes. A bad tcm will drain the battery. A new tcm would be a good start
@aravindanalin4857
6 ай бұрын
@@BigBensCarsAndCycles thanks Ben, I hope TCM WILL cover under extended warranty..i will try to contact dealer in Australia..
@BigBensCarsAndCycles
6 ай бұрын
@@aravindanalin4857 gotcha. Just tell them the tcm is draining the battery. Good luck
@JeronimoStilton14
3 ай бұрын
You heard anything about grounding issues messing with the transmission? I keep hearing something about needing to sand off paint
@BigBensCarsAndCycles
3 ай бұрын
On the early build focuses and Fiestas 2011-2012, some of them had paint in the threads of the ground bolts. That issue is long gone
@HugoMendez-dv4wy
8 ай бұрын
good morning In a 2015 focus, when you replace the battery, the car is not deprogrammed?
@BigBensCarsAndCycles
8 ай бұрын
No, it does not get deprogrammed. Thanks for watching
@user-hv9xk9qo8b
7 ай бұрын
Would a bad cable cause a po760 on a 2011 focus? Weve got the 4spd transmission. Crossing fingers its not being caused by the servo rod issue. Our 04 mazda grenaded its trans, and i buy this 2011 focus cause it didnt have the powershift trans and here it is throwing a solenoid code.
@BigBensCarsAndCycles
7 ай бұрын
Hi, I think you should replace shift solenoid C
@lynzbvb
6 ай бұрын
I did. It's still throwing a code for shift solenoid c, BUT it's an electrical fault for the shift solenoid c circuit. So going to try replacing the harness.
@mitchlefkowitz9116
3 ай бұрын
I need to replace the fuses. Do you know the name l ask for at Auto Zone for the fuses. Thanks
@BigBensCarsAndCycles
3 ай бұрын
May need to go to the dealer to get it (usually stocked)
@fuschiacouch1287
8 ай бұрын
Help please!!! I need change battery today . But I don’t have a Computer . Will the car still work if don’t have Computer . On a 2012 ford Focus car after charging to a new battery ?
@BigBensCarsAndCycles
8 ай бұрын
It's not a big deal if you don't have a scan tool to reset BMS. It'll be okay 👍
@user-cp2nb1zu8p
7 ай бұрын
@@BigBensCarsAndCycles is it ok to just remove the battery and don’t need to reprogram ?
@BigBensCarsAndCycles
7 ай бұрын
@user-cp2nb1zu8p yes its OK. Ideally you'll reset bms
@keenstore5392
3 ай бұрын
even you change the battery and not replacing the battery cable, does tcm still malfunction?
@BigBensCarsAndCycles
3 ай бұрын
If the cable is hard and corroded it must be replaced
@keenstore5392
3 ай бұрын
@@BigBensCarsAndCycles old battery can cause tcm to malfunction?
@iamwhoiam7887
3 ай бұрын
@@keenstore5392 yes! the TCM requires a lot of power. so do the clutch actuators.
@keenstore5392
3 ай бұрын
@@iamwhoiam7887 do you have idea or a sign that clutch actuators needed to be replaced?
@keenstore5392
3 ай бұрын
@@iamwhoiam7887 when I put into reverse, it is shaking live moving forward and backward, with transmission malfunction
@mikereynolds1981
10 ай бұрын
Hello, Do you have the part number for the cables Please. Thank you
@BigBensCarsAndCycles
10 ай бұрын
Sorry I don't, but you can find the numbers on rockauto
@mikereynolds1981
10 ай бұрын
@@BigBensCarsAndCycles Hello, yeah, I didn’t think about rock auto. Thank you for the reply. Have a great day.
@hsamson1103
7 ай бұрын
new battery i put in but still error message my battery need service..How to reset BMS without scan tool??? anyone?...
@BigBensCarsAndCycles
7 ай бұрын
The dealer can reset it for super cheap or free for you. Does the battery light come on with the engine running? if so, the alternator may be the issue
Пікірлер: 71