All that dust can't be good for the lungs. I know as guys some of us are too tough/macho to think/use safety gear but cancer does not discriminate between genders. For your health/well being I strongly recommend you use an appropriate respirator for the job. These things tend to catch up to us as we age. Trust me on this. I'm 49 y/o, worked as a mechanic for 20 yrs. Your call brother. Thanks for uploading.
@L8R-HP
2 жыл бұрын
Yes for sure. Safety first! I used to paint cars without a mask 🤦🏻♂️
@L8R-HP
2 жыл бұрын
@FN LN drugs are bad mmmkay
@L8R-HP
2 жыл бұрын
@FN LN actually I don’t listen to it. I don’t watch my own videos. 😂
@L8R-HP
2 жыл бұрын
@FN LN nice! I’ve always wanted to play drums, or any instrument. Just don’t have the talent
@EddieLeal
Жыл бұрын
@@L8R-HP 😳
@fputigna
Жыл бұрын
Great Video! Very Helpful. Just bought a 2016 Focus 2.0. No codes or anything, but certainly felt like from 1st to 2nd slipped or was "rough." I did as you suggested, but didn't spin the actuator. Just vacuumed, sprayed brake cleaner let it sit, then WD40. Put it back in with screws and turned key a few times to light up panel and engage actuator. Repeated 3 times. Runs great now! Is this something I should do every year? or XX miles for maintenance? I have no desire nor skill to remove and take apart the transmission.
@paulowesley1
Жыл бұрын
You helped me a lot. Thank you very much, you are helping hundreds of people with this video! Thank you
@me0wsky
Жыл бұрын
Man, I have this car and I was really freaked out after hearing how much the repair costs and how many people have this problems. Was about to sell it to avoid the trouble in the future, but now I actually have some peace of mind. Thank you very much!
@vincebal-ot2934
2 жыл бұрын
Hi sir, your videos are very helpful, i wanna try pulling down my transmission on my own but i dont know how to, if you have a step by step guide on how to pull it down that would be great! 🙂
@korycurtis3730
2 жыл бұрын
Thanks for the free knowledge, I see this job coming my way in the future
@jasonbabich8707
Жыл бұрын
Thank you for sharing your knowledge. You’ve inspired to make some videos on things I know real well.
@telelsky
Ай бұрын
VERY INFORMATIVE ! THANK YOU VERY MUCH!
@snarlup
Жыл бұрын
No mechanic was able to fix my ford in El Salvador. I found your video, bought all tools and boom 💥… I fixed it 🫡🇸🇻
@L8R-HP
Жыл бұрын
Nice! Good job 👍
@sabzzfearless2766
8 ай бұрын
🇮🇱🧻💩
@beboelbrokii
6 ай бұрын
I just replaced the same thing on my 2013 ford focus hatchback i dont have that to reprogram my tcm how can i do it and do u know how much the dealer ford would charge to reprogram my car
@sttodd37
15 күн бұрын
2016 ford focus shudder and slips. Then threw a p2872 and started over heating. Had been slipping for a while. Replaced clutch, forks and actuators And reset the transmission. Computer still throwing p2872 and overheating. Now I’m thinking tcm?
@L8R-HP
10 күн бұрын
If all was done correctly you can try a TCM
@linomarcial2566
Жыл бұрын
watching from the Philippines and I was surprised at how easy it was. I was quoted 5500 USD by Ford Philippines. but now I pulled out my car from them and let someone do it by outside shops. Thanks for this man!
@thingamajig6542
Жыл бұрын
Nice video, thanks for the info. It would be so simple for ford to engineer a rubber boot to go around the fork mechanism with just the tips of the forks sticking out. The boot would keep all the dust off the mechanism. Focus titanium cars are really nice and they get 40mpg at highway speeds.
@robertk6ha
6 ай бұрын
What that computer you at end to retrain the clutch? Thank you
@L8R-HP
6 ай бұрын
Launch 431 mini. Can also use forscan
@christianyjohnramos9182
3 ай бұрын
What is the maker of scanner you used?
@L8R-HP
3 ай бұрын
Launch 431 mini. Can also use forscan
@davidmays3333
Жыл бұрын
Would putting some vent hole in the bell housing area help with the dust? Just wondering if u could just put an air nozzle and blow it out once in a while?
@L8R-HP
Жыл бұрын
Maybe 🤔
@schzx14
8 ай бұрын
I was thinking the same thing.
@mrtrump1663
3 ай бұрын
Hello man I have an issue, transmission friction element A stuck on, the code is coming up P07A3:00-EC any idea how to resolve this issue please ?
@L8R-HP
2 ай бұрын
Your forks need to be replaced
@b5a5m5
6 ай бұрын
Has anyone considered drilling a few holes to just blow it out without the hassle of removing everything? I imagine holes in a few key locations around the forks & at the bottom would allow for someone to spray cleaner and air in, along with actuating the forks, to get the thing working really well again. Plug the holes up and then do it every 25 or 50k miles or something until the clutch is actually bad. Could even use a borescope to check your work. They're cheap enough these days.
@L8R-HP
6 ай бұрын
Not a bad idea. As long as you plug them like you said. You don’t want moisture in there.
@AyooJake
2 ай бұрын
How would I get a shop to do this for me? and is there anything else I should have them fix/replace while they do it so I don't pay for them to just blow it out with air?
@L8R-HP
2 ай бұрын
Just have them put all new parts in if they have the transmission out. That would be best
@OfficialRelaxRain
3 ай бұрын
This video is amazing. Thank you. Where did you get your scan tool?
@L8R-HP
2 ай бұрын
I got this one back in 2018, they have better ones one. Amazon or eBay
@jerryplantbasedmonster2129
2 ай бұрын
On min 22:20 which way were you turning the bolt to check the fork action?? Or what happens if you turn the bolt clockwise??
@L8R-HP
2 ай бұрын
Counter clock wise
@ismaelalvarado706
4 ай бұрын
Pretty good video..👍👍👍👍 I just bought a Ford focus SE 2.0 2014 After a couple days check engine show up and a Code P07A3..?? Thanks and good day 👍👍⭐️⭐️⭐️⭐️⭐️
@L8R-HP
4 ай бұрын
Fork A is stuck and needs to be cleaned or replaced
@ismaelalvarado706
4 ай бұрын
Thank you very much. 👍👍
@XJon2011
2 жыл бұрын
Clutch material used to be, may still be, asbestos so be extremely diligent not to work without a mask on the clutch cleaning. Asbestos is no joke and will cause cancer. Again not sure if clutches still have asbestos but I wouldn't chance it.
@knucklebuck3924
2 жыл бұрын
Sorry even I had to put on a mask just watching lol...whooooo that was a Lotta dust
@L8R-HP
2 жыл бұрын
🤣😅
@joshuabrown1602
2 жыл бұрын
I just want to say thanks man you helped me out alot with your videos. My wife has a 2014 focus and 2 days after buying it from a dealer the TCM went on it and we had to fight with them to replace it and 3 weeks after getting it back it's having shifting problems again. After watching your other video I'm going to clean the actuators.
@pierlocus1705
5 ай бұрын
I have questions what diagnostic computer you recommend to me please for work on transmissions please
@L8R-HP
5 ай бұрын
I use a launch 431 mini. Also can use Forscan
@ganormand
15 күн бұрын
know anyone around Denver that can fix my son's transmission?
@L8R-HP
14 күн бұрын
@@ganormand I do not. Sorry :( You can ship me the car or the transmission for a rebuild
@austindearman2296
9 ай бұрын
I accidentally ran my brand new clutch fork out too far. Do you know how to get the ball bearings back inside the aluminum part
@L8R-HP
9 ай бұрын
Dang 🤦🏻♂️ I don’t think you can. I would try to exchange the forks under warranty
@davidbarter303
11 ай бұрын
what scan tool are you using. Just got new clutch forks and seals installed at my local ford dealer. 2800. Still loses reverse every now and than
@L8R-HP
11 ай бұрын
I used a launch 431 mini. Can also use forscan
@user-jf5jg7drth
10 ай бұрын
Вот опять не подставляешь под двигатель, ломаешь правую подушку двигателя. И вы разве не читали сервисное руководство? В нем сказано что затягивать болты вилок надо с определенным усилием и что смазывать ничего не надо кроме шлицов входных валов
@L8R-HP
10 ай бұрын
Right side mount needs to be replaced anyways. It’s always a problem. It’s $20! Change it. Dry forks will stick. Service manual is wrong, that’s why people are paying $5-8k at the dealer for new transmissions.
@sara78130
19 күн бұрын
Hi there i did replace new ckuch clen all. Now same code bk. P287a wbat do u tning ?
@L8R-HP
18 күн бұрын
Possibly your transmission is damaged inside. The tab in the housing could be broken
@sara78130
17 күн бұрын
@@L8R-HP ok thanks
@SIKAZFUKK
Жыл бұрын
8,000$ in Texas I'm trying to figure out how to fix mine cuz I don't have the money to pay for it
@L8R-HP
Жыл бұрын
Wow 🤦🏻♂️. You can do it!
@SIKAZFUKK
Жыл бұрын
Nah I'm not equipped or have the money to do that myself I'd probably mess it up wish I could cuz the transmission used is like 2200$
@SIKAZFUKK
Жыл бұрын
Can I ask you a question? My car ingages in drive but doesn't go past first gear and reverse doesn't go you think cleaning the forks or new TCM?
@L8R-HP
Жыл бұрын
@@SIKAZFUKK even if you buy used you need to clean and lube forks and check.
@victormendoza3927
2 жыл бұрын
Excellent video. Thanks for being so helpful. God bless you! Same issues with my Ford Fucus 2013. Viktor from GDL Mexico.
@timhill3740
2 ай бұрын
How can you tell if the forks are sticking or bad tcm when it doesn’t go into gear?
@L8R-HP
2 ай бұрын
Scan for codes. That will tell you everything
@JuanMartinez-mk4ij
2 жыл бұрын
Muy buen video primo toy investigando eso mismo y voy a entrarle a acer eso tengo ese mismo problema con un yonke 2012 focus
@XJon2011
2 жыл бұрын
Ford TSB for shuddering works for a while if you are just having the 1st-2nd gear shudder. Have a 2012 that's had the TCM reprogrammed at 80k but still shuddered from time to time. Every so often, I've ran the TSB and in doing so, 'scrubs' the clutches enough to keep the shuddering at bay for another 20-30k miles. You will have shudders throughout most of the life of the car in those first two gears. 230k on ours now and it's finally slipping in the 1st-3rd-5th gear clutch and has finally thrown a code indicating a bigger problem. Will reply back with report on code(s) found.
@XJon2011
2 жыл бұрын
@@comparecars_org Oh I can definitely tell that it needs the 1-3-5 clutch, no doubt. The car only had one code for clutch depth or something similar, I forget sorry. But the car will sit for a few months until I can get parts then another month or more to get someone to work on it. Motor runs like a champ and uses barely any oil.
@jasonashley9853
Жыл бұрын
Is that 230k on original clutch?
@XJon2011
Жыл бұрын
@@jasonashley9853 For sure. It had the TCM recall back at just over 100k. Just drive it til it stops and don't worry about the random hickups.
@oden5011
2 жыл бұрын
I was struggling with transmission issue since one year and nobody gave me a clear explanation about the weird sounds I hear even Ford! Now all is clear! thank you so much
@austingagnier
Жыл бұрын
How did you go about getting that fixed?
@oden5011
Жыл бұрын
@@austingagnier I put a new clutch set, release forks changed also.. Ford cant find a definitive solution, there will always be premature clutch wear with this powershift transmission
@deanknight2514
7 ай бұрын
Hey I have a few questions regarding a transmission I bought from a junk yard that I work at. Could you tell me why the clutch won't manually turn by hand? Is that the clutch forks preventing that or a problem inside the transmission?
@L8R-HP
7 ай бұрын
Probably rusted. Forks clutch and everything
@deanknight2514
7 ай бұрын
@@L8R-HP I paid 50 bucks core value for it and planned on reinstalling a new clutch in it for a backup. Think it will serve that purpose? I bought the 2012 focus with 90k on it for a project and the trans for the core value cause I work at a junk yard. You think I did good ?
@Cook2430
7 ай бұрын
Know this is older, but what scanner are you using? Thanks.
@L8R-HP
7 ай бұрын
Launch 431 mini. But you can also use forscan
@zumbawitharachelchel5078
6 ай бұрын
How much time did it take you to do the whole thing from start to end ? 3 hours ?
@L8R-HP
6 ай бұрын
2 hours
@glap8736
6 ай бұрын
Hi friend can you tell me where did you buy the tools that you used ? Maybe amazon or where?? I'm from argentina. Can you share the links??
@L8R-HP
6 ай бұрын
a.co/d/hCmbwSB
@L8R-HP
6 ай бұрын
a.co/d/64RKEge
@tarekbenmahmud8972
Жыл бұрын
I have 2012 ford focus 28,000 miles. transmission started acting up scanned it: p0903 checked the "A"fork and it was clean spinning and springing back with no issue I ordered a new actuator installed,got p07a3. How can the clutch be stuck engaged it the forks seem to work perfectly?any help is appreciated sont want to take it someone who wants to replace as much as possible
@L8R-HP
Жыл бұрын
Could be broken bearing inside. Transmission has to come off
@tarekbenmahmud8972
Жыл бұрын
@@L8R-HP thank you for the videos the reply
@sirvhoc7343
2 жыл бұрын
I have my own video about ford clutch fork stock up.... Easy and cheapest way... Before transmission going down... Hope it may help you.. thnx
@KeyleeCamachoFigueroa-eb2bx
4 ай бұрын
Im glad i found this video, im having the same problem with a ‘12 Ford Focus. Ford Dealer charged me for “an easy fix” 3days later the same light and code came back up. And the mechanic at the dealer said if it came back up its not worth fixing. Do you mind replying with the list of tools by name needed, including that reprogram machine?? Thank you
@L8R-HP
4 ай бұрын
a.co/d/hI55rH9
@L8R-HP
4 ай бұрын
a.co/d/fjplLyx
@L8R-HP
4 ай бұрын
Scan tool I use is a launch 431 mini. Can also use forscan or ford IDS
@maxkline6632
Ай бұрын
what would you say the total time it took from start to finish?? estimated guess
@L8R-HP
Ай бұрын
2 hours. I’ve done 300+ of these
@truck282
25 күн бұрын
Hi how thin can the clutch plates be befor u need a new on thanks
@L8R-HP
24 күн бұрын
Just like a manual car. If there is clutch left it will drive. However, if clutch got hot due to Sticking forks, it will need to be replaced along with the forks, otherwise you will feel the shutter. Shutter happens when clutch disk is warped from the heat.
@DetroitMicroSound
Жыл бұрын
Wonder if they creeped in bad traffic every day... or used first gear to hang on the side of a hill all the time, waiting at lights, instead of using the brake pedal... Seems like if we drilled, tapped, and installed an air jet fitting by each actuator/fork, then hook up to an air compressor, every few months at each, with a capped fitting for the dust to escape, opposite of each, on the case, we could keep it clear of all bulk dust, and probably the dust on everything else, if the fitting creates a blasting effect inside the case.....especially if connected while shifting gears up and down the range, on a rolling road...
@dmncgmz
Жыл бұрын
Awesome explanation. I've had so many issues. Short on cash so I can't get the tools or obd tool. But if I do I can follow this video. Thanks for upload, and thanks to @eddie for the health warning.
@ronnielabbe2149
6 ай бұрын
v linker fs and forscan are your friends 30 bucks ebay
@javiertrujillo3136
2 жыл бұрын
I have a 2018 fod focus with 31k miles why the heck would this happen so soon...im trying to find a recall but ford said there is none...i believe the ones they recalled were like 2012 to 2016 powershift transmissions..i guess this year was supposed to be re designed or engineerd to prevent this issues..i guess they missed mine this totally sucks its way too new...any advice from anybody out there will be greatly appreciated. I dont have the room to even attempt a fix and I maybe in deepwater even if dared give it a shot..this is advance mechanical skills im more on the intermediate level...thanks in advance
@L8R-HP
2 жыл бұрын
Should be still under warranty?
@danielbustamante5608
Ай бұрын
I just wish there was a mechanic that could work on it
@L8R-HP
Ай бұрын
@@danielbustamante5608 bring it to me
@telelsky
Ай бұрын
WHAT SCANNER ARE YOU USING SIR? PLEASE SHARE TNX!
@L8R-HP
Ай бұрын
Launch 431 mini. Can also use forscan
@rachmathidayat771
3 ай бұрын
Hai.. Saya rahmat dari Indonesia.. Video yg sangat bermanfaat..tapi alangkah baiknya jika sudah dibongkar seperti itu lever clutch nya diservis /dibongkar untuk penggantian pelumas/Grease AS lever clutch nya.. Agar bertahan lebih lama..
@L8R-HP
2 ай бұрын
Yes
@lmlm400b
11 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@Assassin1959
3 ай бұрын
Question: Why is this transmission so dry? Where does the transmission fluid play a part in this? I was expecting the entire transmission to be wet, including all parts.
@L8R-HP
3 ай бұрын
These transmissions are dry dual clutch. Basically a stick shift transmission but it’s being shifted by a computer. The fluid is only there to lube the gears
@Assassin1959
3 ай бұрын
@@L8R-HP Thanks great video. If I had the knowledge and the tools to do this, I will not go to a dealer. I have my 2014 focus and the actuator motos is burnt . Code DTC P2872 perform ppt and found clutch actuator motor burn out. The repair cost with labor part and tax is 970.49. I have to pay because I do not know how to do it. Again, thanks for the video.
@mike-v9w4z
Ай бұрын
Did you take it to the dealership? and did it fix your problem?@@Assassin1959
@codyfuchs9210
11 ай бұрын
Where did you buy the launch scanner? I've found a bunch but also found out there a knockoff scam around them as well.
@L8R-HP
11 ай бұрын
eBay back in 2019
@L8R-HP
11 ай бұрын
Amazon has them also
@graphicscardtech3167
5 ай бұрын
What tool is the one you using to test clutch?
@L8R-HP
5 ай бұрын
a.co/d/6K18ZDP
@graphicscardtech3167
5 ай бұрын
@@L8R-HP thanks man what state are you from?
@L8R-HP
5 ай бұрын
@@graphicscardtech3167 NC
@EddieLeal
2 жыл бұрын
FYI...shift actuators are not part of the Ford warranty extension. Replacement will be out of pocket.
@schmick63
9 ай бұрын
What's the best way to get the oil pan off? Being cast you can't go too heavy handed on it and its really stuck on with that gasket maker.
@L8R-HP
9 ай бұрын
Keep tapping it with a rubber or brass hammer
@schmick63
9 ай бұрын
Thanks. I've got a Fiesta at the moment with this code. Will only drive nice for about 5-10 mins after doing the brake cleaner / WD40 trick. Have to pull the box down@@L8R-HP
@hasanthaher9504
Жыл бұрын
Hi , i changed my clutch and tcm but i have problem between 1 and 2 i am getting strong vibration . do you have any idea what it maybe ?
@L8R-HP
Жыл бұрын
Did you do a clutch relearn? Could be the motor mount also
@hasanthaher9504
Жыл бұрын
@@L8R-HP actually i got it changed by ford company and it was good so fare for 6 months , i did change the right mount by my self (ford one ) and the vibration increase , time to time they car becomes good for few hours , the vibration exactly when the car switch from 1 to 2 , the back mount i had a look it seems not bad to case this problem . I am thinking about TCM even it is new , could be the fork but there is no error . Thank you
@avotellymorgan1427
Жыл бұрын
Need some help
@rccarsandmusic2641
2 жыл бұрын
Ford needs to watch this and do a service bulletin for all existing cars no need for removal can be done ever 10000 miles, remove actuator spray brake clean then wd40 done fixed.
@techguy404
Жыл бұрын
That'd be too easy. lol... Gotta keep it complicated. They certainly don't want to admit clutch dust can cause some issues.
@jamesmatheson4746
10 ай бұрын
Wrong..... A is for 1-3-5........ B is for 2-4-6 and R
@L8R-HP
10 ай бұрын
Yes
@chadirino5798
Жыл бұрын
what model of OBD scanner you use?
@L8R-HP
Жыл бұрын
Launch 431 mini.
@troyharbin5189
2 жыл бұрын
Is it possible to just blow compressed air and brake clean thru the holes when the actuators are out to get some improvement? Honestly, I'm just being lazy, I've put far too much money into my 2015 Focus already and prepared to sell at a loss but it'd be a lot easier to do if I could get into some state of driveablity
@L8R-HP
2 жыл бұрын
Yes it can help
@SASMacDroid
5 ай бұрын
I got a question i have a 2013 fiesta 1.0 ecoboost with the dps6 transmission and I'm trying to figure out a slight noise problem before having it checked by a professional. When instantly driving i have a scraping sound from something that is rotating and once it fully rotated the sound gets slightly louder and by the sound of it it must be something lager than a baring or gears the sound it produces reminds me of a steam engine and that sound disappears while driving and switching into neutral I'm wondering if it could be the flywheel or clutch doing the sound thank you for any information
@beardmichaelmb
Жыл бұрын
Man, you about the first guy I've ran across who was actually dealing with the same issues. Question, Would you be willing to give me a step by step process from beginning to end on how to do this procedure, and where to get the tools and parts. My daughter has been getting jerked around by every mechanic she talks to , and I would be willing to compensate you for the knowledge.
@sandycheeks1580
Жыл бұрын
You could message him from his channel. Maybe he takes PayPal or patroeon. I sure hope he does. 🙏🏾 We have a 2013 focus 😓
@sandycheeks1580
Жыл бұрын
You could message him from his channel. Maybe he takes PayPal or patroeon. I sure hope he does. 🙏🏾 We have a 2013 focus 😓
@sandycheeks1580
Жыл бұрын
You could message him from his channel. Maybe he takes PayPal or patroeon. I sure hope he does. 🙏🏾 We have a 2013 focus 😓
@5hinekc649
2 ай бұрын
Hi This Shine Currently I had a ford focus titanium and its transmission got stuck and also car is difficulty to start so can you help to sort out
@L8R-HP
2 ай бұрын
What are the codes?
@5hinekc649
2 ай бұрын
Actually I don’t know error code but Ford dealer is saying to replace clutch and total cost to replace is 5,900 NZD Are you living in Newzealand
@L8R-HP
2 ай бұрын
@@5hinekc649 it’s most likely stuck forks. So that makes sense. I’m in USA.
@texasxoutlaw
10 ай бұрын
Sorry if this question has been asked already, but What scan tool are you using?
@L8R-HP
10 ай бұрын
Launch 431 mini. Can also use forscan
@texasxoutlaw
10 ай бұрын
@@L8R-HP awesome!! Thanks man, love the content!
@mountainman5025
9 ай бұрын
Although, the tools you have are not shade tree tools.
@L8R-HP
9 ай бұрын
Not sure what that means
@faroukkhedhri5376
Жыл бұрын
I have ford focus 2012. 130 000 km have problem. Stock in the thirst speed . But hwen stop caming cold. Returne work and change all speed. Can you give me a solution for this . Thank you
@lungaekfamily9534
2 ай бұрын
Pls tell me about type of scanner sir
@L8R-HP
2 ай бұрын
Launch 431 mini. I also use forscan
@robertstone2648
Жыл бұрын
Your videos are great! Thank you for making them. Where do you get replacement forks?
@01mustang05
Жыл бұрын
kennyUpull
@hermantom4292
Жыл бұрын
I know it been a year....what the make of the scanner tool that u used reprogram the transmission
@L8R-HP
Жыл бұрын
Launch 431 mini
@L8R-HP
Жыл бұрын
You can use forscan
@georgediaz5293
3 ай бұрын
Easy, when you have the funds, and the correct tools to fix it, having the funds everything is easier.
@richardgraham3658
10 ай бұрын
You should only have to use the adaptive learn if you replace the TCM.
@L8R-HP
10 ай бұрын
Best to do all. Takes few min
@richardgraham3658
10 ай бұрын
@@L8R-HP 👍
@toddnull4040
8 ай бұрын
What is the scanner u r using? I have no insta gram.
@L8R-HP
8 ай бұрын
Launch 431 mini. You can also use Forscan
@derkdevries328
11 ай бұрын
Hi. You must have come across transmission overheating. How do you normally most of the time fix that?
@L8R-HP
11 ай бұрын
Clean or replace both forks
@derkdevries328
11 ай бұрын
@@L8R-HP does dirty/bad forks really trigger the overheating message on dash? Just asking to double check with you on your answer. Thks..pls reply
@L8R-HP
11 ай бұрын
@@derkdevries328 yes. Clutch forks stick, making clutches slip and get hot. Also when they slip they create more dust and forks stick even more over time
@TheBDD1970
2 жыл бұрын
Thanks, good job! FYI, I used to drive through that intersection all the time!!! LOL, small world.
@duaneulman9915
Жыл бұрын
Thank you !!!
@tonygrey828
Жыл бұрын
Is this an automatic or manual transmission?
@L8R-HP
Жыл бұрын
Auto
@MarkCayetano
Жыл бұрын
Gonna do this soon to my Fiesta. Fork is seized up and broke. Car has 135,000 should I be swapping out a new clutch while I’m there or do you think the old clutch still works
@L8R-HP
Жыл бұрын
Clutch is usually good. It’s best to replace everything while you’re in there
@curtishouze1471
2 жыл бұрын
My brother has a 2012 skips ( will not go into first gear).
@elviojimenez432
2 жыл бұрын
I'm was going to buy a focus only 32mi but the transmission shift strong
@chevyslowva547
4 ай бұрын
Fun fact turn the key dont start place shifter in n works to when tha car says trans hot
@chicagoa1432
2 жыл бұрын
wow amazing work, there's no video on youtube on how to remove ford focus transmission in detail, if you do it that will be a great content and it will help a lot of people, thank you very much.
@scothubbard5323
2 жыл бұрын
If you don't have the mechanical knowledge to actually remove the transmission. This is something you should not attempt, and take to a reputable repair shop.
@chicagoa1432
2 жыл бұрын
@@scothubbard5323 why you sound so mad Scot, I replaced the whole transmission in my garage with 1.5 ton jack and 2 jack stands, hope this was some inspiration and motivation for you to do it yourself😉👍🏻
@scothubbard5323
2 жыл бұрын
MAD?????? You're obviously misinterpreting. I'm not mad, angry or complaining. Sorry if you my posts made you feel that way. I simply asked questions as they came to mind.
@scothubbard5323
2 жыл бұрын
@@chicagoa1432 May been because my cap locks was on! 😆
@scothubbard5323
2 жыл бұрын
@@chicagoa1432 It's a genuine question. the control system is obviously self adjusting to compensate for wear throughout the life of the clutch. it just seems it shouldn't need resetting??? **** This is NOT an angry reply! **** 😉
@fairfax_fran5109
Жыл бұрын
This guy is fords dealership worse nightmare
@sharonvodden3593
Жыл бұрын
I have a 2013 ford focus titanium n and had my clutch assembly replaced 7 times. It has been covered sor not but now ford wants me to pay to have it fixed $2,000.00 This an ongoing problem and I feel that it is fords fault. Give me our opinion.
@L8R-HP
Жыл бұрын
It’s almost never the clutch. The forks get stuck and make the clutch slip. Put some new forks in it and you be all good
@TechnMoto
Жыл бұрын
good info. My daughter is dealing with this now on her focus. They want 3K to replace the clutch. I think she is trading in the car.
@YaqoBrwary
Жыл бұрын
Hi dear do I have to reset the clutch
@L8R-HP
Жыл бұрын
Yes. If clutch is removed it has to be reset before install
@Alfsmusic0131
Жыл бұрын
Hey Brother, thanks for All the video It's very helpful. Can you help me How to know If I had a Bad Actuator Please!! Before I change it .... I've already changed my Two Forks and De Clutch Because They Are all Bad Then I Try to swap The Actuator A & B but It still the Same ..... So I mean When I Turn On the key There. is a Wierd Sound You know ..... When I Try the relearn I m not sure if its the TCM or the actuator .. It says Clutch A stuck or Engaged? But It fails at this point Thanks for helping if you can!!
@L8R-HP
Жыл бұрын
Some forks come with shipping retainer clips. Did you remove those before install?
@Alfsmusic0131
Жыл бұрын
@@L8R-HP Yes I Saw and Remove it
@Alfsmusic0131
Жыл бұрын
@@L8R-HP I checked My Actuator A and it's getting stuck ... I mean it doesn't Turn When I turn it by Hand
@Alfsmusic0131
Жыл бұрын
@@L8R-HP I will check the other one Tomorrow
@Alfsmusic0131
Жыл бұрын
@@L8R-HP apart from that, I m not Sure yet if The TCM has issue also... I will check Those actuator Thank you so Much
@francislucena5059
2 жыл бұрын
Hi Sir, what scan tool you used to relearn the transmission?
@L8R-HP
2 жыл бұрын
Launch 431
@charlesschluessler546
2 жыл бұрын
Dumb question...P090C error code, says actuator B, but my forward gears were having issues. I thought B was for the reverse gear.
@L8R-HP
2 жыл бұрын
B is for reverse, 2nd 4th &6th
@miltontaylor3449
Жыл бұрын
Hello, what part of NC are you located? I have a 2013 Ford Focus with a sticking clutch and willing to tow my car to you for repair. Milton
@L8R-HP
Жыл бұрын
Arden NC
@garrieparsons2265
Жыл бұрын
I put new forks in mine I’m trying to do a relearn it says clutch travel test failed then goes no further in the relearn process any advice ,???? Thanks 👌👍👍👍
@L8R-HP
Жыл бұрын
Did you reset the clutch?
@sspikeable
10 ай бұрын
do you remove the tcm or leave it bolted to the transmission. i couldnt tell by the video
@L8R-HP
10 ай бұрын
Leave TCM on the transmission
@sspikeable
10 ай бұрын
@@L8R-HP thanks I really appreciate your videos and answer... cant afford outrageous mechanic repair costs so doing it myself with your help!
@L8R-HP
10 ай бұрын
@@sspikeable you got this 👍
@gcposeidon0800
Жыл бұрын
What obd scanner software did you use?
@L8R-HP
Жыл бұрын
I used a launch 431 mini. You can also use forscan
@gcposeidon0800
Жыл бұрын
Thank you so much for your reply!!
@pa1668
3 ай бұрын
Wish you were here in UK, then I would not have to put up with ripoff so called auto repairers over here
@raghavbajaj8974
Жыл бұрын
Sir, in Ford Fiesta/Focus what problems we can have if clutch release forks in clutch housing are not going back?
@L8R-HP
Жыл бұрын
Forks need to be cleaned or replaced if they broken
@broncoxpl
Жыл бұрын
Ok so I have a question. Are the A&B actuators clocked ? Say for instance you had a could for one and you replaced it. Not knowing the fork is stuck? Or can the actuator be installed anyway.
@L8R-HP
Жыл бұрын
Actuator can be installed even if fork is bad. Need to try to turn the fork counter clockwise 14 times, it should go back on its own, if not fork is ether bad or stuck
@leougeo
2 жыл бұрын
Sorry to bother. Engine cranking but won't start. Is there anything obvious I'm missing?? Installed new clutch and forks and all the assembly went smoothly. Everything is connected made sure of that.
@L8R-HP
2 жыл бұрын
Any codes?
@deeobedoza6663
2 жыл бұрын
Thank you for this video really learned a lot about DCT
Пікірлер: 708