Thanks Gerard. Just bought some led bulbs but didnt want to mess with anything after a visual. Glad my suspicions were correct. Good day, sir. 🎉
@mylairhasnoip
4 ай бұрын
Thanks mate. WAY more useful than the workshop manual which doesn't actually say what to do, just points at things... the wingnuts were not easy to make out in the manual
@Swiftsean8907
4 жыл бұрын
Really helped me, I always forget about the second hidden wing nut lol. Thank you!
@JohnDoe-uu2zs
2 жыл бұрын
Tell us about it, just broke the corner part of the lens because I didn’t watch this vid first!
@Muddy.buddy1000
Жыл бұрын
Good on you 👍
@arshadnakeem2947
3 жыл бұрын
Thanks a lot mate, I was struggling to find a garage in Kyiv , at last some how I did it by your help ... thanks again ..
@ilker597
2 жыл бұрын
Handy tip: Recommend using a 21mm or 22mm wheel brace/wrench, it fits snuggly around wing nut giving good leverage to release from stick point then unscrew with hand. Using flat-head screwdriver with that shallow recess or even pliers against wings can begin the damaging process. Actually think this is a good design for maintenance, just remove a couple of wing nuts to release the whole cluster. Can then take inside for cleanup and replace bulb(s) and return to re-install. Similar operation for headlights, unscrew a few threaded fastening positions and pull out to reveal bulb access positions, skin remains unscathed.
@kevinsmith1325
Жыл бұрын
Thanks for the advice! Only thing that worked for me.
@DianaPerpich
Жыл бұрын
Great DIY video. Showing what the assembly looks like off the vehicle really helped clarify where to look for the screws.
@deborahsimpson4674
4 жыл бұрын
Thank you for making this video. After watching it a couple times I was able to go right out & change my light.
@GerardBurkeBurkesGarage
4 жыл бұрын
Good to hear Deborah, thanks for leaving a comment. Happy I could help out
@Manufan-og1xg
Жыл бұрын
Thanks a ton. I actually only needed to replace the top left bulb, but I'm sure once I take it apart I'll be able to figure that out easily.
@pb7208
6 жыл бұрын
Thank you. great video
@loristickler
7 ай бұрын
Perfect explanation- thank you so much!
@tamurkhawaja7279
4 жыл бұрын
Thank you saved me much needed cash, may god bless you and your family.
@GerardBurkeBurkesGarage
4 жыл бұрын
Glad I could help, thanks for the kind words Tamur.
@trevorbrad
Жыл бұрын
Thank you - used your video today to figure out how the heck this would come off 😂
@buzzdog24
Жыл бұрын
Amazingly helpful, thank you.
@GerardBurkeBurkesGarage
Жыл бұрын
Thanks Robert
@Jean-Seb748
5 жыл бұрын
Useful ! Thanks , keep good work 😀!!
@robsmith507
2 жыл бұрын
Ford did it again, another thoughtless design, that's why I drive a Toyota!!!! Good work on figuring out how to do this,.
@johnmunro4952
2 жыл бұрын
That literally took 10 minutes and 2 wing nuts. Couldn't have been simpler.
@pavly4432
4 жыл бұрын
Thanks so much, this helped a lot
@someguywithaford
Жыл бұрын
Word of advice: wear gloves while doing this. Not very thick ones, thinner the better, but enough to protect you from a minor cut. I got scratches on a few places on my hands, beware the metal in the area where the plastic screws are is very sharp
@layotota
4 жыл бұрын
Thank you! :) this helped me. Almost felt like a puzzle.
@GerardBurkeBurkesGarage
4 жыл бұрын
Yes it can certainly feel like that sometimes when trying to figure it out. Happy I could help out. Thanks for the comment
@julioflores799
5 жыл бұрын
Excellent thank you for sharing
@GerardBurkeBurkesGarage
5 жыл бұрын
Thanks Julio
@misterG2006
5 жыл бұрын
Thanks. Plastic wing nuts were very tight and fiddly but pliers undid them. Cheers
@danielbeatty10
5 жыл бұрын
This was perfect. Thank you!
@Fazzat333
3 жыл бұрын
Thank you Sir.🍀
@GerardBurkeBurkesGarage
3 жыл бұрын
You are very welcome Bozack
@DavidGarcia-br3xi
5 жыл бұрын
Really well done and concise video! Will be using this as reference when installing aftermarket taillights. Thank you!
@ltn8214
Жыл бұрын
Nice
@GerardBurkeBurkesGarage
Жыл бұрын
Thanks
@stealthDC
2 жыл бұрын
Thank you
@GerardBurkeBurkesGarage
2 жыл бұрын
👌👍
@paulpearson330
9 ай бұрын
Can you replace the Led light as mine is flickering
@chingwong7207
4 жыл бұрын
How do you recover a plastic wing nut if it falls down in the hole?
@chrisangier9296
Жыл бұрын
Lol
@izc1945
Жыл бұрын
I take it that's why mines missing 1 and its abit loose
@loveabides3982
2 жыл бұрын
It helped but you didn't actually change the bulb!
@micksherman7709
4 жыл бұрын
1.45 how do you get to the top wing nut?
@metaabal-zahrani2966
2 жыл бұрын
👍
@welshman2081
5 жыл бұрын
Hi I enjoyed the video, can you conect here for a conection to the rear reversing lamp, as I need to conect my rear dashcam while I am in reverse, Hpoe yoy can help, welshman 744
@Kevin-rf9sx
4 жыл бұрын
Got the same question. Do you have the answer yet?
@mrsteel9026
2 жыл бұрын
jeez ford are shite design they really are, never again will i buy one.
Пікірлер: 50