Dear sir hope that you see this comment, I’ve bought a vcm 2 as well but I don’t know which version it is all I know that it’s an Vcm 2 ES6516 I don’t know which version it is can you look it up for me please ?
@zokacstutorials7361
9 ай бұрын
Sorry I don't know
@HAWWK-TUAHh
9 ай бұрын
is there any way that i could find out or where should i look ?@@zokacstutorials7361
@cbr-entreprise9089
Жыл бұрын
Can soft work with obd2 red wiring used for renolink?
@soundmanfill244
3 жыл бұрын
I have the same VСM2 as yours. Can you share your IDS 17.04 folder via google drive? I will test your installation method. Thank you
@zokacstutorials7361
3 жыл бұрын
Link is in KZitem description
@oliverqueen9445
3 жыл бұрын
ive been using old way by installing version 86, patch and then create system restore. But it doesnt work anymore recently. I will try this one hopefully it work! thank you so much for this video. Btw can we do module programming with this? like program key and stuff
@zokacstutorials7361
3 жыл бұрын
I am just an IT guy, this video is result of many hours instaling and testing IDS software with different patch versions. My bigest knowlege in IDS software is to put car into self-test. All options you must test yourself.
@kevinsousa2340
3 жыл бұрын
Thank you for this tutorial. I am getting a "Testman Runtime System has stopped working" error message when I try programming an ECU. Anyone else getting this error message and know how to fix it? I appreciate any help!
@zokac021
3 жыл бұрын
Try 120.04 tutorial
@kevinsousa2340
3 жыл бұрын
@@zokac021 Thank you. I tried 102.04 but same problem :( Going to reinstall and see if that helps.
@kevinsousa2340
3 жыл бұрын
Tried to reinstall but unfortunately same issue. Not sure what to try next, appreciate any suggestions. Thank you.
@dragoljubpetrovic2049
2 жыл бұрын
Zoki zanimljivo moram probati mozda zatreba za ford.
nothing special, but if you are already installing, use v120.04. See info (up right corner)
@zokacstutorials7361
Жыл бұрын
v120.04 = Dec, 2020
@oliverqueen9445
3 жыл бұрын
already tried and it keep saying invalid license. any idea why is that happening?
@zokacstutorials7361
3 жыл бұрын
Please let me know, did you followed the instructions exactly as in the video? You can't use orginal IDS icon (see section CleanUp Icons), every time when you want to use IDS, you must start IDSpatch.exe. Patch will disable licence, and enable emulated driver for VMC 2 device.
@oliverqueen9445
3 жыл бұрын
@@zokacstutorials7361 Yeah i followed every steps on the video, removed the icons and when i opened the patch it says that license invalid. Tried both on windows 7 and 10 still the same. Btw thanks for this video, i might try that on different computer and see if it work
@zokacstutorials7361
3 жыл бұрын
@@oliverqueen9445 , I just installed another copy od IDS Software, following this tutorial. If you still have a problem installing. Please send me a screenshot on my e-mail address.
@bobautotechford9905
3 жыл бұрын
kzitem.info/news/bejne/p2aam3ynqJ2jn20 Dear You can contact me i will install IDS via Team Viewer.
@michaelpeat4197
3 жыл бұрын
When i try this i get to the pluggimg in device and there no installing device pops up and when i open patch it says device not connected failed
@chasoy314
3 жыл бұрын
followed your instruction but still showing not connected to VCI
@zokacstutorials7361
3 жыл бұрын
You must connect your VCI device without connected to vehicle. If VCI have power (12V) from vehicle PC will not recognize VCI device. If this is not your solution, you must tell me at what step of the instructions you stopped
@chasoy314
3 жыл бұрын
@@zokacstutorials7361 after copying IDSpatch then clean up icon.....after i plugged in VCM no usb driver detected
@zokacstutorials7361
3 жыл бұрын
@@chasoy314 Please check your USB cable , use only 0,5m or 1m cable. Open Device Manager and plug/unplug your VCI 2 device, see if something is changing in Network Adapters. If not, your VCI 2 device or USB cable is broken. Change USB cable or Update VCI 2 firmware. VCI 2 Firmware update - You must put your VCI 2 in recovery mode and use VCI manager software. This tutorial is working but you have newer kzitem.info/news/bejne/yZxmnpqpmGSmf5g
@chasoy314
3 жыл бұрын
@@zokacstutorials7361 i tried to use vxmare that came with it and it sees.the vci. i was able to update the firmware to 1.61. but still cannot see using your software
@zokacstutorials7361
3 жыл бұрын
ok if you have successfully updated the VCM, the driver is not a problem. Your PC recognize VCM device. Then start the patch, patch will start IDS software, when IDS software is started, look in the right bottom corner. There must be a VCM device icon. If you don't have icon... your device is not recognized by your PC. Please answer me. what happens when you plug/unplug the VCM device (as I answered in comment before) What is the name of device in network adapters.
@sunhoha2702
3 жыл бұрын
Thank you so much. I installed V119.06 and good works.
@zokacstutorials7361
3 жыл бұрын
Great, please send me a V119.06 files, I will make another tutorial
Пікірлер: 33