Jackery has just launched its flagship ‘Jackery Solar Generator 3000 Pro’ in Canada! Use the code 'CA-3000Pro-YT' to enjoy an early sale discount of up to 499 CAD OFF (Validity period: April 26th - May 26th) Jackery Official website: bit.ly/3Hdvv5b Amazon: amzn.to/41VASxO
@Aco747lyte
Жыл бұрын
And you forged a jolly nice, beautifully balanced camp axe thanks to that Jackery, which I forgot to add. 🌻
@richardsurber8226
Жыл бұрын
your new ID punch meets with my approval
@honthirty_
Жыл бұрын
Nice hatchet. Appropriate leather cover. Well done.
@72151
11 ай бұрын
I find the skills absolutely fascinating.
@bobmusser9862
Жыл бұрын
Very impressive
@richardsurber8226
Жыл бұрын
Very Good I'm glad you"re still the most Courageous video guy I'm aware of
@robsonsantosOSO
Жыл бұрын
This hatchet turned out to be really good and the fact that it has a big eye ensures that it is really strong in this connection with the handle. Congratulations!
@ArmySoldier1972
Жыл бұрын
Great video Army SE Oregon
@RRINTHESHOP
Жыл бұрын
Nice test of the system, I have a 3000 watt Goal Zero and 200 watt Solar Cell, works great.
@JackPinesBlacksmithing
Жыл бұрын
I hope you see this as the compliment it's intended to be but that was a Diresta-level video! Nicely done!
@AtholIronworks
Жыл бұрын
Nice axe, nice generator. Thanks for another great video
@BlackBearForge
Жыл бұрын
Glad you enjoyed it
@simpleman4224
Жыл бұрын
Great tutorial! Seems like a nice little generator! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@3870TheDad
Жыл бұрын
Interesting, hmmmm. Great looking axe with sheath.
@ticovogt
Жыл бұрын
Excellent presentation!
@johnearhart8811
Жыл бұрын
Great video John
@hughcupples1279
Жыл бұрын
The ambient noise from the forge is not any worse then the previous unit.. if anything it’s a lower pitch tone in the video… 🍻🍻
@BlackBearForge
Жыл бұрын
Good to know, thank for the feed back
@milkbottle1274
Жыл бұрын
I was just thinking u should make an axe XD
@michaelrowland1326
Жыл бұрын
Great device for any shop or home
@stoneinthefield1
Жыл бұрын
Great video.
@paulthompson5666
11 ай бұрын
Thanks for the video, your style and willingness to transfer skills in this way is really appreciated 👏
@willw7595
Жыл бұрын
Nice build. Little hatchet looks great. stay safe John.
@larryjones4713
Жыл бұрын
Love the hacket and love the video. I always learn something new watching your videos
@kuriakos
Жыл бұрын
Fun video, John. I am glad to see you getting more sponsors. I was also impressed by how well your glove handled near direct contact with such hot metal! Glad it did its job.
@BlackBearForge
Жыл бұрын
That glove won't hold up for long wit that much heat, but it will reduce the risk of burns.
@kennethomeara9848
Жыл бұрын
Hello John, I hope all is well with you and yours. The noise of the forge is barely noticeable. Take care. Thank you for all you do.
@kevingunter5994
Жыл бұрын
Nice looking axe.
@Bangalangs
Жыл бұрын
A handsome little axe. I like the look of the larger touchmark on there. That solar system seems like it would be a good investment, especially in an area where power outages are frequent. Another excellent video sir. Edit: It’s always nice to see the Little Giant come off the bench every now and again.
@BlackBearForge
Жыл бұрын
Glad you enjoyed it
@NjalLaing
Жыл бұрын
Very nice little axe 👍
@schmiedemesser_Jasmine
Жыл бұрын
Wonderful video! You are such a great blacksmith and a very good and down to earth teacher! I really appreciate everything you do and the way you show your skills for us out on the internet who try to take away things from the true experts and skilled artists! Wishing you all the best and lots of success from the other side of the Atlantic Ocean.
@chewyakarieckenicholas6049
Жыл бұрын
I truly appreciate and enjoy your videos and that is a beast of a generator for a solar system
@mikelastname
Жыл бұрын
If you had an induction forge and a couple of these Jackery's you could go somewhere warm and forge in the sunshine :)
@travisgrimforge
Жыл бұрын
I likes the addition of a quick sheath demo. I just started leatherwork for my bladed items so seeing it in videos is pretty neat
@BlackBearForge
Жыл бұрын
Thanks, I do like the idea of carrying the project through the end and including the extra details. Its just a matter of time to get everything recorded and edited.
@GodschildinNC
Жыл бұрын
Just nice! I really like the way that the hatchet turned out. I will have to start watching your other channel to see the build!
@frankgaletzka8477
Жыл бұрын
Hello John Thank you for the Video. This axe is a nice Projekt. This solar Box is very usefull too I wish you a good New week Yours Frank Galetzka
@PuissantPike
Жыл бұрын
It was great seeing all of the leather work for the sheath. I had no idea you even had that station or all those tools. Fantastic work!
@robbiegambley1037
Жыл бұрын
I really enjoyed watching you make your AXE head , handle , wedge, the lot , clever work. Thank you - ROBBIE - New South Wales , Australia .
@cae2487
Жыл бұрын
Seeing how long it took you to punch the hole in the 1 inch of o1 makes me feel a lot better about the amount of time it took me to punch a hole in 2 in round 1045. Punching through that much material definitely takes a minute or two to get all the way through. Next time i plan on trying the drill 2 holes trick and seeing how that goes vs free punching without the holes. Another great vidoe thanks for sharing i always enjoy seeing you at the craft.
@Joe_for_real
Жыл бұрын
I love the video and how it illustrates that even in a traditional craft we are reliant on electricity. While you could do everything you did today without electricity given different tools and methods; at the end of the day you still need to make some money. Also, the forge noise really wasn't bad in the background. I didn't even notice it until I saw the forge running in the background of a shot.
@BlackBearForge
Жыл бұрын
Thanks.
@billygoat126
Жыл бұрын
7:26 watch your fingers lol great video as always. i wish i could be this guy’s apprentice i would work for free just to learn from him and ask him questions
@michaelhayes1678
Жыл бұрын
Beautiful work, and thanks for sharing! That Jackery seems like a good product for you.
@rogergadley9965
Жыл бұрын
The video length was just fine, no fuss from me.
@MASI_forging
Жыл бұрын
Another great work 😃😃
@thomasthecrunkengine3512
Жыл бұрын
Hilarious that the day this came out my power went out lol!
@owenkuhnke3785
Жыл бұрын
I don’t care much about sponsorship things usually… but this generator actually interests me🤔
@JeffSearust
Жыл бұрын
Great looking axe... But I was waiting for the induction forge!!
@BlackBearForge
Жыл бұрын
The induction forge would require 240V 40A. Not sure if anyone makes a portable battery with that type of output.
@robertayers9424
Жыл бұрын
Very enjoyable! The forging, woodworking, leather working and Jackery trial, appreciate it all. Thanks!
@mtn.homeforge351
Жыл бұрын
Nice job. And a fair product review. Thanks for all your work John.
@Green-night1
Жыл бұрын
Nice little axe, it looks like a work horse for it's size. I really like the large eye for a strong head/handle interaction. VERY COOL to see the JACKERY GENERATOR POWER THE WHOLE PROJECT! GREAT VIDEO AS USUAL! THANK YOU.
@madhounddog04
Жыл бұрын
The Jackery solar system cost to much for me. I'm a disabled veteran and I'm on a set budget. It's one of those pipe dream things I would like to get one day. I love the axe you made. Another thing I'd like to get one day.
@paradisefalls37
Жыл бұрын
Great video! The Jackery looks super useful, I like how the solar panel folds out and yet is compact . Nice work on the camping axe and leather sheath ! You have many talents! Thanks for sharing your time and skills!
@BlackBearForge
Жыл бұрын
Thanks, Glad you enjoyed it
@richardsolomon8076
Жыл бұрын
Nice job John and Jackery 👍 awesome project, was cool to Doc's hot shop in the background during the axemask sew up. Stay safe team 🙏
@scottyuhrich
Жыл бұрын
John, I am so glad you made this video, not so much for the Jackery but for showing the camp axe from start all the way through handle and sheath. Don't get me wrong, I was intrigued by the Jackery and will be checking them out because I think its a great product, but I wanted to say that the length of the video was entirely worth it! I started getting interested in in blacksmithing at the Western Minnesota Steam Threshers Reunion in Rollag MN, which is not far from my home and have attended religiously for over 30 years, by watching the blacksmiths there. After years of searching, I finally bought a coal forge at auction a few years ago and when trying figure out how to make good use of it, I found you on You Tube and you have taught me so much! Funny thing, when I could not find a coal forge that wasn't beyond repair, I began to think they were made of unobtainium, but once I got my first one, 3 more seemed to just fall in my lap. Each one has a planned purpose, so I'm not hoarding them for no reason, but it is strange how fate works that way. Although I have mastered a great amount of understanding from you, tempering and hardening still remains a bit of a mystery to me in a number of ways, so I appreciated you taking the time to show the process on the camp axe. It appeared that you were using the heat stored in the larger mass of the rear of the axe to expand into the blade portion, is this correct? I also liked the commentary on the changing of the colors, I would have appreciated a little more commentary on exactly what was happening in order to better understand the process. Some people can watch a process and derive all the information they need from that, but the way my mind works, i need to understand how the process works, and once I do that, it is mine forever. I know that you have touched on this subject a number of times as a course of demonstrating a project, but have you ever made a video dedicated to how to temper and harden and the different ways it can be done and explaining what is happening to the metal as it goes through it? If not, I think it might make a very interesting video. Finally, as a side note, my two sons, as is often the case, share different aspects of my personality. My youngest is totally into my interests in collecting old farm machinery, while my oldest prefers the more solitary aspects of my love of reading and other indoor pursuits. As a result. I have spent a lot more time doing things with my youngest son, that is, until I got my first forge and found out that my oldest had long desired to do blacksmithing. Now we both watch your videos and work on skills that you have demonstrated, so for that, I owe you a debt of thanks! I apologize for the length of my comment, but I do owe you much and would like to learn more.
@aaarcs8895
Жыл бұрын
Hi John, fantastic video mate! The extra time spent showing the tempering colours was great. Thanks for your effort
@Aco747lyte
Жыл бұрын
Last year we had a goal zero, but Jackery and its solar generator was just so much better in so many ways that I bought their top one. So it is heartening to see you're being sponsored by them, and what a magnificent, well-planned video you produced! I wish you a wonderful Sunday and thank you for this great presentation. All the very best from Wendi, UK 🌻
@BlackBearForge
Жыл бұрын
Glad you enjoyed it
@rmircovich6871
Жыл бұрын
I always enjoy your videos. I liked seeing you also doing the leather work.
@jandastroy
Жыл бұрын
Love your work! It's always a joy watching what you've been up to. You always put so much care into your work and it's just really nice to see.
@tylerhebert8237
Жыл бұрын
I like the new touch mark, looks good. I need to make that lap vice you used for the leather work.
@jesseayers7933
Жыл бұрын
Once again, another great tutorial. Keep up the great work
@rickward4384
Жыл бұрын
I was just reading up on these units, very interesting and quite impressed. thank you
@jeffgrier8488
Жыл бұрын
John, that axe turned out fantastic, and that Jackery looks super handy, i could definitely figure out some uses for one of those!
@bigredbeard65
Жыл бұрын
Nice video, I really enjoyed seeing the generator work out so well, must be a quality product, I also enjoyed seeing the leatherwork you did. How about a video about doing some leather work and explain the different tools you use on it? I always learn at least a little bit from your videos, thanks for your hard work.
@SchysCraftCo.
Жыл бұрын
Great job John. That forged out very well there. Hopefully you get great use out of both of them for many years to come my friend. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld On. Keep forge lit. Keep making. God Bless.
@danandashleyhayes3159
Жыл бұрын
Another well done video. I'm in the be market for a solar generator so this is timely. Not to mention a nice little axe. I like that style handle, too. As always, thanks for the time you put in in these things. It's sincerely appreciated. Also, the VO with the ribbon burner worked really well.
@r3ngokuking
Жыл бұрын
Beautifully practical little axe, John! Love seeing these smaller useful tool projects, and this one has given me the inspiration I needed for a camping knife and axe pair that I've been meaning to make.
@olddawgdreaming5715
Жыл бұрын
Great videos John, the Jackery Solar Generator did a good job in the shop today. Hope they reach out with the 3000 model to you. The axe turned out great, stay safe and keep up the good work and videos. Fred.
@timocsutube
Жыл бұрын
Thanks John, thoroughly enjoyed the full process build!! That Jackery system would be great for mobile demonstrators out there!! Much quieter than even a named brand lownoise generator. Speaking of noise, that new forge is soooo quiet!!
@dadegroot
Жыл бұрын
Very interesing John. The Jackery AU site only lists the 1000 Pro (nothing larger here yet), but then, we also run 220-240V rather than the Nth American 110V, so maybe that's the reason.
@mandolinman2006
Жыл бұрын
I'd never thought of pine tar and boiled linseed oil. I do have a quart mixed with turpentine and a quart mixed with Dicitrusol. For the record, the smell of orange oil and pine tar isn't the best in the world, but it is easier to mix with the pine tar than the turpentine.
@bluudat1site
Жыл бұрын
hey john love the new touch mark, would love to see the process of making one. still havent made mine yet not too sure the best way to go about it. cheers and thanks for being an inspiration.
@BlackBearForge
Жыл бұрын
I don't make these. I send the art work to Henry A Evers company and they make the stamps. They aren't cheap, but I've never worn one out.
@bluudat1site
Жыл бұрын
@@BlackBearForge wonderful thanks for the info
@sladoeii
Жыл бұрын
I had issues using two panels to charge the 800w I have at work, on a single solar cell it pushed 95w in, but ganging in two only pushed ~160w. Was slightly disappointed in that. Otherwise I've used them a few times now without any complaints.
@woodcutter4670
Жыл бұрын
all the tools and equipment you have, I surprised that you don't have a handled hot drift for doing the axe eye
@chrismaloney3680
Жыл бұрын
Great video, as always. I was wondering if you had tried using the Jackery to run the induction forge? That way you could have an all electric off grid shop.
@BlackBearForge
Жыл бұрын
The induction forge would draw more power when heating plus its a different voltage. A larger solar system with the right inverter would be able to do it though.
@BlackHoleForge
Жыл бұрын
Hey John. I was very curious about your leather sheath making setup. I have some questions. Probably too many. Do you think you could do a video on how you do your leather work? Like maybe what kind of stitching did you use? I've tried several threads from Walmart, but none are strong enough. And where do you get leather in rolls? Thanks John for another good video, and thanks jackery for supporting.
@BlackBearForge
Жыл бұрын
I will add that to my list of video ideas. There is a little bit of information in this video from my personal channel - kzitem.info/news/bejne/0nmAmqRuj2V-dmk But I will try to do a more detailed video
@OuroborosArmory
Жыл бұрын
Should have asked them to send you one that can run the power hammer LOL
@BlackBearForge
Жыл бұрын
That would be nice. But they don't really give you much choice.
@pjamestx
Жыл бұрын
Thanks for taking the time to make this video, I'm definitely thinking about getting one of these for my shed/shop, as right now I have to run an extension cord from the house every time I'm out there, and it's not a huge deal, but it does add up (and I don't like running that cable if it's raining!). Great axe, love the sheath and the new touchmark is great! I didn't recognize the smith you had playing in the background while working on the sheath, is that another youtuber? Keep up the great work, as always!
@BlackBearForge
Жыл бұрын
Thats Docs Hot Shop and Forge kzitem.info/news/bejne/0nmAmqRuj2V-dmk
@stevefarley7014
Жыл бұрын
Careful with that Wilton. Seems like that’s kinda broken and shorting out in my opinion.
@markmoreno7295
Жыл бұрын
I was curious to see if the pack would power a fridge overnight, just cuz around here when the power goes out, that is mostly what I worry about and our power seldom goes out for longer than 4 hours.
@BlackBearForge
Жыл бұрын
I'm pretty sure it will run a fridge, but for how long depends on how large it is. Might be worth contacting them to see what they say.
@giveemtheboot5123
Жыл бұрын
I don't know much about blacksmithing but wondered if you could use a holdfast to keep the piece in place while hammering. I know holdfasts are typically used in woodworking but wasn't sure if that would work with your anvil.
@BlackBearForge
Жыл бұрын
You can in some anvils. But mine doesn't work well with a holdfast
@mikehodges6598
Жыл бұрын
I wonder why you were using that short drift, as your glove was actually touching the O-1 at 7:28 for several seconds and the middle fingertip caught fire. That's a really good glove that you didn't feel that! Is that drift much smaller than the bigger one you normally use?
@DrewDiaz
Жыл бұрын
Had you used the induction heater off of this I’d have had it overnighted
@BlackBearForge
Жыл бұрын
That would have been great, but there are limits
@rickbrasche8781
Жыл бұрын
Whats the power draw on the induction forge? maybe run that off their bigger battery they sell?
@landonsfoodreviews7619
Жыл бұрын
Any advice on making the eye. Because that is something I struggled on, on the railroad spike hatchet.
@richardsurber8226
Жыл бұрын
Say John, I just thought of a dumb question watching your video about using alternate power. Those radius at the waist of your anvil. Ever thought of using those in a particular project?
@jaredbranham5112
Жыл бұрын
Can you make a mowing sythe
@Brian-bn3qp
Жыл бұрын
Looks like you got some new quench oil. Is that the stuff you found that happened to be named Black Bear quench oil?
@BlackBearForge
Жыл бұрын
No, this is from McMaster Carr
@CapoSilverback
Жыл бұрын
It looks like your tongues are too pointed. Every time you strike it the piece is pivoting left and right I know it makes it easier to turn over but when you’re turning it over, you’re losing its relationship to the tongs can you explain that
@OneWheelDrive365
Жыл бұрын
I dare them to send one to Matthias Wandel. He would be honest what he think of the Jackery solar generator.
@Fiddsterix
Жыл бұрын
whats that "drill bit" you use around 21:00 ?
@BlackBearForge
Жыл бұрын
Thats a carbide burr. Its essentially a rotary file.
@xxitz_pr0gxx631
5 сағат бұрын
Do you have the name of the song from the part of the video where you were quenching the blade? I'm not big on folk music, but I really enjoyed this song!
@BlackBearForge
5 сағат бұрын
David Benedict - Possible Water
@xxitz_pr0gxx631
4 сағат бұрын
@@BlackBearForge thank you, so much!
@tonypadilla6404
Жыл бұрын
Hi . IF I like One Of the Stuff what you Make ,For Exemple those Axes Tell Me .Thanks
@sirkai007
Жыл бұрын
Does O1 not forge weld? Would you not be able to make a wrapped eye axe out of it?
@BlackBearForge
Жыл бұрын
If you have O1 thats too thin to punch, a wrapped eye should be an option. But forging the heavier material down just to wrap and weld the eye seems like a lot of extra work. Generally I use forge welding and wrapped eyes for mild steel bodies with a higher carbon edge.
@tonyfolin3589
Жыл бұрын
I thought you where goning to use an induction forge. Do think it would be possible to test?
@BlackBearForge
Жыл бұрын
This unit is 120V 15A, the induction forge is 240V 40A. You could run it off of a battery system, but it would have to have an inverter sized for it.
@Thumper1944
7 ай бұрын
Looks like a new forge you have what kind is that?
@BlackBearForge
7 ай бұрын
The new gas forge is from Dark Star Forge
@stevesalles6047
Жыл бұрын
would it charge a electric car while you are driving ???
@Jiminycroquet
Жыл бұрын
interesting that they call it a "generator" when it's really a battery pack with an inverter.
@michaelmongillo1237
Жыл бұрын
Good Day John, What oil do you dip your tools in.? I have just been using oil motor oil.
@BlackBearForge
Жыл бұрын
To cool them while working I generally use water and then some punch lube from quick and dirty tools as needed. For quenching oil hardening steel I use a commercial heat treating oil.
@StanErvin-yo9vl
Жыл бұрын
Nice! 👍. 🐻⚒️🪓
@chefboyrdanbh
10 ай бұрын
Where do you get your touch marks?
@BlackBearForge
10 ай бұрын
I have them made at Henry Evers. henryaevers.com/
@thomascorner3009
Жыл бұрын
Silly me! I thought you were going to use the induction forge. 😄 Now that would have been impressive: 0 carbon footprint for the whole operation.
@BlackBearForge
Жыл бұрын
It would be possible in theory. But would require 240V 40A output
@thomascorner3009
Жыл бұрын
@@BlackBearForge Yes, and if the induction forge did not exceed the maximum current output of the battery. But black smithing with zero CO2 emission would be quite an achievement, and a benefit for all. I think it would be worth exploring, if it is possible.
@vedamaritabullockashley2770
Жыл бұрын
Good morning John, Beautiful axe! What type of quench oil do you use?
@BlackBearForge
Жыл бұрын
I use a commercial quenching oil purchased from McMastr Carr
@fanert1
Жыл бұрын
fun but pointless fact, about 25 years ago i worked for AUSON that made your pine tar
Пікірлер: 132