DAAAAAAAAMMMM!!! THAT IS SUCH A BEAUTIFUL DESIGN!! Looks like flames 🔥!!
@mtnbkr8480
Жыл бұрын
This show reminds me of This old house, you knew eventually Bob Vila would screw something up. Thanks for carrying on the tradition. 👍
@SYCKNTWISTED
Жыл бұрын
Absolutely beautiful!!!! You are an ARTIST!!!!
@RVsbladesnthangs
Жыл бұрын
Just a comment to support the channel
@FireCreekForge
Жыл бұрын
Thank you sir!
@Rowrowthegravyboat
Жыл бұрын
Knife makers don’t make mistakes. Just smaller knives.
@bigbob1699
Жыл бұрын
Glad you use good commercial steel rather than scrap junk.
@robertnault5865
Жыл бұрын
Dude !!! I love that wavy pattern and your attention to detail. Your hard work and not cutting corners shows through in the end result!!!!!!!!! Nice man !!!!!
@PakngahWantaro
Жыл бұрын
Great pattern welded idea...💪💪💪😸😸😸
@AaronsRandomLife
Жыл бұрын
I sincerely thank you for NOT calling this Damascus. Your honesty and clear communication doesn’t go unnoticed. “Pattern welded” may not have the same cool, trendy ring to it like “Damascus” does, but seriously folks, you don’t take your dog for a walk and call it marathon running, even though there are similarities between the two.
@jojoemcgeejoe457
Жыл бұрын
Even with the tip break, it's still a beautiful knife. Well done, sir.
@shaundekarske9703
Жыл бұрын
That blade is beautiful. Well done.
@marcuswilliams5419
Жыл бұрын
My god man you make some real works of art my friend
@adamsouthard1155
Жыл бұрын
I very much appreciate the use of a unique steel. Everyone uses 1080, 15n20, 1095. Obviously those are easy to forge. But they also have the properties they have. And would not be my first choice in a knife I owned. Folding and cutting the metal 200 times won’t change those properties. You’re the first person I’ve seen who’s chosen to step outside that box. So kudos.
@achall29
Жыл бұрын
Nice work as always!
@FireCreekForge
Жыл бұрын
Thanks for watching!
@davidrogers6694
Жыл бұрын
Always a pleasure watching and learning from you and your videos
@FireCreekForge
Жыл бұрын
Glad to hear it
@kzarnold3678
Жыл бұрын
It's a simple pattern but pleasant to look at
@wolfparty4234
Жыл бұрын
Brother, I’d rather have a knife that I done have to handle it with a pair of white gloves!! Your Flaws are the characters that gives it its soul…! I love 100% 💪🏼🙏🏻❤️ Wishing you and your family health,wealth and joy🙏🏻
@FireCreekForge
Жыл бұрын
Thanks Wolf, take care
@MrCstrsm
Жыл бұрын
Your videos are the knife videos I will watch over others. Have you ever done a folding knife?
@aaronkreger1891
Жыл бұрын
Like the new pattern. Great work and craftsmanship as always! Keep up the good work.
@stephenjohnson6841
Жыл бұрын
Even with the mishap it turned out awesome! Thanks again!
@HickoryDickory86
Жыл бұрын
My heart sunk a bit when you showed the tip chipped off. Still, the knife turned out beautifully and the handle is gorgeous.
@akknight1971
Жыл бұрын
Despite the first tip breaking the finished project is fantastic. Well done.
@the_fafologist
Жыл бұрын
Pattern came out very cool. Nice job!
@malcontent6150
Жыл бұрын
Beautiful pattern!
@brianlogan9686
Жыл бұрын
I like the "ghost flame" look on the blade..
@stevejette2329
Жыл бұрын
Thanks Fire Creek Forge Guy !!
@FireCreekForge
Жыл бұрын
You bet!!
@kingsleywray6632
Жыл бұрын
Thanks for sharing. That turned out an interesting pattern.
@rhodie33
Жыл бұрын
Beautiful knife.
@dananderson6847
Жыл бұрын
For how to address the the issue of content vs how long it takes to produce a project, especially as it relates to pattern welded projects, you can split it up into two videos. The first one is producing the pattern welded billet, and the second is producing the blade. A side benefit could be reaching a wider audience, in that some people may enjoy pattern welding videos, but not blade making videos, and others vice versa. I suspect that most of your current viewers will still watch both, as would I. I'm loving the critiques and debriefs at the end. Keep up the great work and constant improvement. May God continue to bless you.
@FireCreekForge
Жыл бұрын
Thank you sir
@chrisoliver1327
Жыл бұрын
Nice recovery from that tip.
@bobjoncas2814
Жыл бұрын
LOOKIN' GREAT, NICE WORK, KEEP SAFE...
@mattkrause6264
Жыл бұрын
That’s a beautiful job, man!
@garetkonigsfeld2
Жыл бұрын
I'm so glad you said that about the tip. I personally love a surer thin tip on my knives. Thanks again.
@terrywhite9017
Жыл бұрын
That's a beautiful knife. Maybe make some behind the scenes short videos. Clips out of the main releases. That will increase content.
@scottlanghorst1483
Жыл бұрын
Your videos are always entertaining and informative. Have a Great Weekend 👍
@FireCreekForge
Жыл бұрын
Thank you sir have a good one!
@NORTHBROOK1978
Жыл бұрын
Do what you do. Love your videos.
@TheJoebella
Жыл бұрын
I like it. It's a useful tool and doesn't need lots of bling. Function over fashion, but unique made with attention to detail on the the quality is what works. thanks
@peterskey8155
Жыл бұрын
Like the pattern you got on that knife
@Metalheavenjockeolsson3653
Жыл бұрын
Very nice work👌😊😊
@ryansheard8092
Жыл бұрын
I absolutely LOVE this blade. I love the final shape of it and would love to have one in this shape with the pattern in tact.
@garetkonigsfeld2
Жыл бұрын
Home depot or any hardware store caries a clamp on file handle. I put it on the tang of my knives when testing. Sure has saved my hands a lot of grief. Nice job. Thanks for sharing 👍.
@TooTall553
Жыл бұрын
Brother that is a really neat pattern 👌 👊👋
@FireCreekForge
Жыл бұрын
Thanks 👍
@jplarussa2392
Жыл бұрын
Awesome knife!
@timgore1487
Жыл бұрын
Good recovery
@donaldmartz7256
Жыл бұрын
Beautiful knife.
@TheRedbeardster
Жыл бұрын
Nice one
@chrisangelone3349
Жыл бұрын
Still got a pretty good size blade even after reshaping it. Looks great
@brianlogan9686
Жыл бұрын
Solid blade!!
@nicholaseedy3244
Жыл бұрын
This is a beauty of a knife. Your price on that is on game, maybe (probably under sold). I can't afford it that is not your fault. Buying one of your blades is on my list of success.
@TDarv
Жыл бұрын
i know what u mean, no knife or project is perfect, especially when for sale. its tough to make the call whats good enough sometimes... but it seems like no one else, even other bladesmiths, seem to notice either way! Beautiful pattern on this one!
@donbeeler49
Жыл бұрын
Your videos are always entertaining and informative.
@FireCreekForge
Жыл бұрын
Thank you I appreciate it!!
@WiIIieNelson
10 ай бұрын
Beautiful
@sterlingowens5744
Жыл бұрын
Everything I’ve ever seen you do has been stellar! Granted, nobody’s perfect. But one thing I’ve learned over my many years of working with my hands, is in most situations, two is always better than one. If you try putting two clamps, on a piece of wood, on both sides of the knife, you’re less likely to have swivel issues. Plus you’ll be able to apply more even and steady pressure. Two enthusiastic thumbs up on everything I’ve seen so far!
@bwhip
Жыл бұрын
Do you think you could include some baby footage in an upcoming video? Your son should be approaching his first birthday in a couple of months, and it would be great to see how he's growing. Oh, and nice knife.
@minnesotatomcat
Жыл бұрын
U should try that same thing but with threaded rod and nuts screwed on in a pattern like that 👍
@RULERofSTARS
Жыл бұрын
That pattern is real nice. Maybe try again but weld a solid piece of angle where that clamp is all wobbly?
@andrewhayes4246
Жыл бұрын
You can get way better clamps to do that job. Bessey do very good clamps. I love that pattern - really nice!
@dirtfarmer7472
Жыл бұрын
Thank you Sir. I do appreciate your work, it looked cold there in west Texas.
@Joe___R
Жыл бұрын
In the future, use dewalt extra large trigger clamps. They have an easy 600lb squeeze force and no swivel jaws.
@chewyakarieckenicholas6049
Жыл бұрын
Overall it is a great looking blade I like the drop point better than the other design
@deezgamesareforyou8926
10 ай бұрын
Awesome build man nice job
@Freeman-Dl70
Жыл бұрын
I first encountered 01 tool steel in the mid 80's my Dad was commissioned to build an oversized Bowie knife, the giant man couldn't pay $300.00 fast enough to take possession. He then made a skinner/ hatchet combo set for his Brother and himself. The hatchet split a 2×4 with a 16 penny nail in it. When it's passed to me, it'll still have the slight chip from the nail. It's split thousands of pelvic bones, and separated just as many heads. It's an amazing steel for hunting applications.
@cae2487
Жыл бұрын
Just following the knife makers law....there are no mistakes just shorter knives 😉 sorry to see that original tip go like that but it still ended up looking great. Keep up the great work it's always fun seeing what you are coming up with next. Thanks for sharing with us all.
@michiganengineer8621
Жыл бұрын
Something you've probably already thought of but, just in case, maybe cut a slot in the block of wood you're using to clamp the blade so it fits snugly around the bar of the clamp. That should help to minimize twisting from side to side. I think I'd also drill into the backside of the wood block the same size as the swivel head on the clamp so _that_ can't slip off. . Gorgeous knife even with the oops! Anything handmade (or even a limited machine made run) is going to have some "imperfections", the important thing is that those "flaws" not interfere with the functioning of the finished product. In many cases they'll increase the value of the item _because_ of the uniqueness.
@FireCreekForge
Жыл бұрын
Thank you!
@tedsmith3061
Жыл бұрын
Never dull.
@ryanblystone5153
Жыл бұрын
thank you
@SpaceNImmunology
Жыл бұрын
As a scientist, I can say that not a single experiment I conducted ever was "perfect." Even when they came out as good as possible. This knife is exactly that, the best of both worlds! You tested a new idea, made a GORGEOUS blade, and learned from it along the way! Great job! I absolutely LOVE the handle - it is gorgeous! Would love to see you make a 2nd video where you "perfect" this build by making the small tweaks you spoke of to take it to the next level. If we don't learn from our "mistakes" - we don't learn and will never evolve our trade. Great job again! Huge fan!
@FireCreekForge
Жыл бұрын
Very true, thank you!
@lairdcummings9092
Жыл бұрын
In general, you learn more from the 'imperfections' in an experimental result than you do from the 'perfect' parts.
@MASI_forging
Жыл бұрын
Thank for sharing. 👍👍
@hulkthedane7542
Жыл бұрын
👍👍. Man enough to critique your own work! Beautiful knife, does look a little funny that the lines of the damaskus don't line up at the tip, nut beautiful none the less. Looking forward to seeing the next attempt at the same pattern.
@intellectualiconoclasm3264
Жыл бұрын
The pattern pre-weld makes me think of bamboo.
@joeywh33lz
Жыл бұрын
Sh!t happens, that's life. Whenever a challenge or problem arises, it's up to us to adapt and overcome them. Losing the tip sucked but the blade came out looking great!
@francisbennett5965
Жыл бұрын
I like it better the way it ended up. If you don't like it I'll take it lol
@shamrock767
Жыл бұрын
Great work, maybe a sash clamp would work better for you for your handle work. Kudos as always, thanks for sharing.
@terryhagen2711
Жыл бұрын
I think that is one of my favorite patterns you have done so far
@FireCreekForge
Жыл бұрын
Awesome, thanks!
@BCM1959
Жыл бұрын
Looks like you need to do some restoration or repair on your anvil? Those videos are interesting too...
@mulepowerforge
Жыл бұрын
love these videos you do with the different ideas for pattering the steel. can you do one with barbed wire so the wire is lengthways like a fenceline, and have a piece of mono steel for the edge? basically just a barbed wire pattern along the blade.
@ajhearn4535
Жыл бұрын
I hope so, that sounds awesome
@jenohathazi920
Жыл бұрын
Bravo Master
@AustinMuellerHandmade
Жыл бұрын
Awesome work, I was thinking that guard fit up did look great during the build, and it was funny to see you bring up how good you felt it was in the critique lol
@FireCreekForge
Жыл бұрын
Thanks man!
@donaldmatthies6026
Жыл бұрын
The knife turned out really good! Thank you for taking time to film, edit and post this video.
@FireCreekForge
Жыл бұрын
Thank you I appreciate it!!
@mcbarber5108
Жыл бұрын
Your projects just keep getting better and better!
@bruceshook1781
Жыл бұрын
that is a great looking knife. Have you ever tried making a legendary Ninja sword.? That would be very interesting.
@robertr4193
Жыл бұрын
One thing you may want to do to help stabilize at least some of your clamps it to either epoxy the swivel part in place to stop it from moving or just wield in in place to stop it from moving. Might even want to glue a patch of sandpaper to the other end of the clamp where the handle sets while the glue cures in the handle to reduce the chances of the handle slipping out. In other words modify your tools to fit their use.
@kajunroehl8649
Жыл бұрын
Try clamping the blade in a vise then put your clamp on the vise and the back of the handle. Tyrell knifeworks has a video on this and I have not had a break yet doing this. Beautiful knife in the end despite the break!
@FireCreekForge
Жыл бұрын
Yep I have done this, but I don't have a vise in the house where it's warm for the epoxy to cure
@matthewf1979
Жыл бұрын
You have a TIG welder, right? Try using thin O1 drill rod as a filler. I think it would have worked to repair the failed tip forge weld after a little clean up. Bummer about the tip. Weld that damn clamp swivel so it never happens again. I love these “canister” builds! I’d love to own one of them.
@Shadowband72
Жыл бұрын
Very knife 🔪
@trbogenschutz8774
Жыл бұрын
Oh damn, tough break. No pun intended. I'm kinda scratching my head now on the same issue with a W2 gyuto with a wa handle. I think I'm just going to clamp it in my voice and put some weight on it or see if I can't get a big C clamp around it. I've been watching your channel for a couple years now and greatly appreciate the do's and dont's you go over in your videos. Keep up the good work!
@fifis101
Жыл бұрын
Definitely a very effective and fast method and with next to no waste! These canister options are endless.
@fredk.2001
Жыл бұрын
Make a new clamping fixture to replace the wobbly bits on the existing clamp. A metal cage holding a softwood block would be nice, fixed to the end of clamp to avoid uneven clamping loads/blade tip breakage.
@_maur89_41
Жыл бұрын
Sensacional 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
@freel213
Жыл бұрын
I dont know how your page started showing up in my feed but Im glad it did. Im not a knife maker but do pretend to be a hobbyist woodworker. As far as you tip breaking the F body clamp you have there will be notorious for slipping like it did. If youre looking for something different look at K body clamps, Harbor Freight sells a 24" parallel K body clamp for less than $40. The jaws on that clamp will always stay parallel. Anyway, keep posting. I also pretend to be a cook (no chef by any imagination) and love some of your chef blades
@The_Nonchalant_Shallot
Жыл бұрын
Might I suggest a clamp modification? In my experience, I've dealt with wobbly clamps by removing the rotating foot and instead drilling a hole into a small block of wood large enough for 2 skateboard bearings. (Or I guess in your case whatever bearings would fit the threaded shaft of that particular clamp) The block of wood won't stay on by itself, but it will keep it from wobbling while still allowing it to rotate. .It just won't be able to pivot. :)
@ralieghwhite9076
Жыл бұрын
I love these “thin canister” builds as you called it. I would LOVE to see the boundaries pushed on them. So excited for future videos. 😊
@Markwellknifeco
Жыл бұрын
Get rid of the swivel and weld a piece of flat bar on it. You will want to grind the little ball off the end that is under the swivel. That’s what I have done.
@michaelmorrison4843
Жыл бұрын
Oh no, I bet that was like a stab in your heart! Luckily it still turned out to be a nice useable knife. Good job.
@chrisordiway7203
Жыл бұрын
Great looking knife! Absolutely love the lines in the blade and the handle is gorgeous. Nice recovery from loosing the tip.
@FireCreekForge
Жыл бұрын
Thanks Chris
@matthewdancik5515
Жыл бұрын
Could not agree more... Everything here was a happy accident and it's a beautiful, hard-working, piece because of it!!!! Excellent job all around Elijah!!!!!!!
@gregvaughntx
Жыл бұрын
Great video! I appreciate your honesty at the end. Yeah, we're all our own worst critics. All I know about forging I learned from "Forged in Fire" and I am enjoying learning more about the craft without the time constraints the show imposed. My dad made knives when I was little, but it was more "cutting and grinding" than forging.
@melgillham462
Жыл бұрын
I like the single billet thin canister idea. It's a great one off thing and the unique patterns are amazing. Shame the tip snapped but that's knife making huh.... that ironwood is always gorgeous. I enjoy your vids amigo. Ya ain't gotta be an oscar winner for those of us seeking knowledge and creative inspiration. Even just a fellow maker to possibly bounce ideas off of.
@TheVirgilio77
Жыл бұрын
What I love from your videos sir, is that you always explain the process, the problems and the solutions. Very useful info for begginners and professionals alike. Thank you for sharing
@FireCreekForge
Жыл бұрын
Thank you very much!
@loyd5074
Жыл бұрын
Put the knife in the clamp the other way so the swivel is on the handle instead of the tip
@helcat3567
Жыл бұрын
Mate I love the way you show your problems and mistakes. You always got a little trick up your sleeve to fix them and move forward. So once again we see a great knife and a bunch of techniques not onlying in creating it but also overcoming unforeseen problems. I comend you on this build from start to Finnish. I can't wait to see what you come up with next. take from your pal Helcat in Australia.
Пікірлер: 189