Love seeing Charlie and his collection of machines !
@user-wc2di1tk8c
Жыл бұрын
Менда
@user-vv1vd3iw7s
Жыл бұрын
Ну это вообще завести грейдер да еще на нм поехать это супер возвращение к жизни старичка а ведь завелся и поехал эти ребята молодцы уважуха им
@rons4778
Жыл бұрын
Great seeing Charlie again miss his videos
@joeyannas7828
Жыл бұрын
Thank you for taking us to check on Charlie !!
@charlessmyth
Жыл бұрын
I recall an old International Harvester combine harvester that sat in a barn for many years. No way was that machine to leave, other than on the bed of a trailer. One day, a couple of guys arrived, fiddled with it for a short time, got it started, and drove it away :-)
@sassafrasvalley1939
Жыл бұрын
An old Gleaner sat along the highway inside a pole barn. Eventually, the posts rotted off and one of our smaller Ozark tornadoes passed by and flattened it onto the combine. A few years later the farmer died and the Gleaner sold “Ran when parked, As-Is”. My neighbor bought it for $150. He and his farmhand cleared the barn off of it, put in new batteries, aired up the tires and it started. After tinkering with it for an hour or so, they loaded it and pulled it to the farm. That was five years ago and he uses it every year to combine wheat, milo and beans out of a small rough field in the river bottom. A field that would tear up his big new machine. He says he has less than $1000 in it and wouldn’t sell it for under $10K! He also says, “Old iron can be replaced… but why?”
@stupiddems9422
Жыл бұрын
I have a 1970 Cat. 120 rigid frame grader I bought brand new, that runs like a champ! Not as powerful as newer models but still works for what I need it for! I use it for snow removal on our 11.2 mile road out to our homestead and all the roads between to our homestead neighbors after every snow storm. Plus grading out our potholes after the last snows are melted. Noisy as hell but gets the job done! Hard to get the parts up here in Alaska so we tool and die everything ourselves on all our heavy equipment items! It gives us something to do in the long winter months when our lodge closes up for the snow season.
@ronaldclark1178
Жыл бұрын
A "Charlie" video is always GREAT!! Thanks Chris.
@johnjazwinski2661
Жыл бұрын
Got to love those old Detroits. I've worked on many of those over the course of 40 + yrs. If it ran when you parked it, chances are it'll start again.
@AnomadAlaska
Жыл бұрын
Thanks for taking us to see Charlie. He's got to be as old as me with all that accumulated junk laying around. My stuff is smaller and mostly going to scrap metal and the dump.
@derrickpettit86
Жыл бұрын
Freaking awesome, fired right up, amazing, let a new one sit 10 years once an see if it starts back up, thanks for sharing Chris
@tomrogers9467
Жыл бұрын
By that time the “software updates” would be “no longer supported” and you’d have to scrap it! Timed obsolescence!
@derrickpettit86
Жыл бұрын
@@tomrogers9467 exactly man
@shisholy7828
Жыл бұрын
Always enjoyable when you two get together. Miss you Charlie. Watch Chris my favorite tv show every day. 🥰 Thanks and Happy Holliday
@charlessantos891
3 ай бұрын
Oi
@terryrogers1025
Жыл бұрын
Fun with Charlie, always interesting to hear the back stories on his old equipment and to see them brought back life again. Thanks for the ride along sir.
@user-wc2di1tk8c
Жыл бұрын
Кызыккандар биргебиз
@jimconnor8274
Жыл бұрын
Gotta love those 2 strokes! 2 for 2 up and running!
@Rickimusic
Жыл бұрын
Glad Charlie is well. Nothing from him in a long time.
@slngblde
Жыл бұрын
He was posting this summer
@cityguyinthecountry
Жыл бұрын
I've been a fan of his videos for a long time now, he never disappoints!
@charlessantos891
3 ай бұрын
Olá um bom dia❤
@CK-yi6pc
Жыл бұрын
Unbelievable!! Good to see Charlie…..🇺🇸
@DavidSmith-jc4yk
Жыл бұрын
Awesome to see the old Champion grader! They were made in my hometown of Goderich Ontario Canada until bought out by Volvo many years ago.
@AirplaneDoctor_
Жыл бұрын
You mean before Volvo bought the company, took all the technology, and shut it down.....
@DavidSmith-jc4yk
Жыл бұрын
@@AirplaneDoctor_ Exactly Laying off hundreds in a small town.
@DavidSmith-jc4yk
Жыл бұрын
Are you still in Goderich?
@michaelrice9822
Жыл бұрын
Came to comments to see if anyone remembered. Been traveling thru old Goderich for 47 years on our way up to Meaford.
@DavidSmith-jc4yk
Жыл бұрын
@@michaelrice9822 It is a small world. I grew up in Goderich and now spend my summers in Meaford.
@donnamullins2089
Жыл бұрын
Oh my gosh if you had not been filming these are beast of the fields. Thanks Chris.
@RumMonkeyable
Жыл бұрын
Charlie! Good to see you, Man! 👍👏😀❤
@charlessantos891
3 ай бұрын
Oi❤
@bluegrallis
Жыл бұрын
@ 5:40 you just make the parts! I worked for years as a machinist, making all kinds of parts. From a 2.5 inch long brass carburetor emulsion tube, to a 18,000 pound chuck of 4140, turned into a 12,000 lbs crankshaft for a big press. Ya just gotta find the right guy.
@charlessantos891
3 ай бұрын
Oi
@RickyCervo
Жыл бұрын
Charlie and his old iron machines ❤️
@davidstanton197
Жыл бұрын
The old Huber grader/trellis is lovely in Springtime when the Carolina Jessamine is in bloom!
@charlessantos891
3 ай бұрын
Oi
@williamd6967
Жыл бұрын
Mr Charlie never fails to amaze me lol.he hasn't posted in like forever.Glad to see he's ok.
@thatdave86
Жыл бұрын
Yes same here ,I was getting worried that he had pushed himself too hard too far ,glad he still moving ☺️
@tania5assumpcao697
Жыл бұрын
@@thatdave861111nome 1111nome 1111nome dele é Rafael Marques de Barreto Barreto tiro no pé de o que é um dos mais importantes tiroteio no shopping shopping e o
@user-rb7xe9xm3u
3 ай бұрын
Verte good
@KosaKosa-pr7op
2 ай бұрын
@@thatdave86😢😢
@Blossom_Chops
Жыл бұрын
Great to have an update from Charlie, glad he's OK. Both of u work SOOOO hard. Take care JQ 🇬🇧
@robmatthews7972
Жыл бұрын
Good to see you having fun with Charlie. Maybe Charlie can find a machine shop to make a replacement gear for the steering.
@cwbean3087
Жыл бұрын
That's what you can get Charlie for Christmas,....a jump box! Lol. Oh,...and a grader gear box. :)
@peterouellette3874
Жыл бұрын
I can't believe how fast the 2nd one started up. It seems like it was just running yesterday.
@tacoenvy
Жыл бұрын
Been a while since we got a good Charlie equipment video, they are always absolute gold haha.
@davisphillips7792
Жыл бұрын
Love the old stuff. Sits for years and little to no electrical gremlins. And hey everybody knows with proper storage gas and diesel can stay fresh for up to a year. . . Or in an old machine outside for 10 years and still burn great! Again the old stuff is fun to watch come back to life.
@cityguyinthecountry
Жыл бұрын
I've been a fan of his videos for a long time now, he never disappoints!
@fredericklininger9143
Жыл бұрын
I like seeing old equipment being restarted again and used. Before all that computer junk
@kevinpoore5626
Жыл бұрын
Well I'm glad to see I'm not the only one who keeps unique stuff around most people will consider junk yeah it made me repair or it may be unrepairable but it's always good for parts
@thomasrose6880
Жыл бұрын
So glad we finally got a video with Charlie in it he hasn’t uploaded in awhile and his videos are always fun to watch
@410wright
Жыл бұрын
We just watched you and Charlie on Southern Homestead. Classy as always and he sure looked appreciative of your help on the memorial. ❤
@charlessantos891
3 ай бұрын
Oi❤
@waltermattson1730
Жыл бұрын
It is always fun to see Charley. His machines don’t want to ever die.
@peewee.3138
Жыл бұрын
Nice to see Charlie Kanuck again!
@cityguyinthecountry
Жыл бұрын
His videos are some of the best out there, I'm constantly impressed.
@charlessantos891
3 ай бұрын
Oi
@jeffterhune8573
Жыл бұрын
Always fun to see you two.
@richardcline1337
Жыл бұрын
Another version of Hank and Wiley!
@martymclamb5750
Жыл бұрын
Great video Chris, always nice to see the old equipment, and see them fire up
@johnpierce1251
Жыл бұрын
Always good seeing Charlie hope all is well with him and his family
@korhing1066
Жыл бұрын
I am just Speechless ! I cant get my Lawnmower to start from the Fall when i winterize to start in the spring But some How you ! Can get a FORGOTTEN FOR YEARS CHARLIES OLD GRADER to Start up in 3,09 Seconds ! With vines growing around it , Dang ! What did i miss ?
@apollorobb
Жыл бұрын
Those Jumper boxes are handy as hell i have 2 of them the Napa ones are built by JNC i have the JNC versions. Ole Detroit sounds good. It was a wonder the rack wasnt stuck on it
@wileycoyotesr8623
Жыл бұрын
I like Charlie. He's smart, easy going, and has a good sense of humor.
@Monkeysic
Жыл бұрын
A true testament to the old equipment. New stuff is nice but that old stuff you can fix yourself and it's reliable. No electronics!
@cityguyinthecountry
Жыл бұрын
His videos are some of the best out there, I'm constantly impressed.
@michaeld_68
Жыл бұрын
Charlie is a great guy and it's amazing how they fired up like that!! 💪
@franciszekgoyke5516
Жыл бұрын
Kup O
@kenoesch668
Жыл бұрын
good OLE CHAMPION grader ,built in Goderich Ontario Canada
@charlessmyth
Жыл бұрын
Chris and Charlie have come on a long way in the last few years :-)
@charlessantos891
3 ай бұрын
Oi
@nickjames2370
Жыл бұрын
Great to see and hear Charlie again.
@vinnyhern
Жыл бұрын
Hi Charlie, glad to see your OK, waiting for you to post on your channel!
@RadioactiveLobster
Жыл бұрын
Starting a rusty machine covered in vines that hasn't started in years?? Thought I clicked on a Diesel Creek video there for a second.
@arthurjennings5202
Жыл бұрын
The VW Bug had a reputation for always starting, but there is nothing like a Detroit diesel to sit for years then start immediately on 15-year-old fuel.
@deborahchesser7375
Жыл бұрын
True, old Mack’s too ✌️🇺🇸
@user-wc2di1tk8c
Жыл бұрын
Ооба ошондой
@spitfirenutspitfirenut4835
9 ай бұрын
My bug was shit here in Canada during the winter.
@arthurjennings5202
9 ай бұрын
I was thinking of Woody Allen's movie Sleeper.
@lairdspivak3616
Жыл бұрын
Built those graders from 1973 till 2008. That sucker is before my stint there.
@michaelschuenemann3505
Жыл бұрын
Hey - both Graders are Running but need some Repairs and some TLC ! Good to see these older Machines still being used and NOT Scraped ! Many Cheers from us in Australia !!!!
@eieio6641
Жыл бұрын
Must have visited Charlie to see about some soil stabilization.
@alan-sk7ky
Жыл бұрын
😉
@philipwolf825
Жыл бұрын
last time I saw charlie, you guys were working on betty I think, great to see him again
@holdenbrougham7768
Жыл бұрын
Such reliable engines these 4/71 Gm , so fast to come back like it was yesterday
@andrewmiller2868
Жыл бұрын
I love seeing what gear, new or old, that Charlie has 👍.
@2badger2
Жыл бұрын
There are a lot of people that would love having some of this old equipment ...
@diggerdave51
Жыл бұрын
Always good to see Charlie !!!
@johnbulla8708
Жыл бұрын
THAT'S AMAZING THAT THE MOTOR GRADER STARTED RIGHT ON UP NO PROBLEM AT ALL. U R TOTALLY AWESOME FANTASTIC ON EVERY JOB U DO.
@thomasleonard1846
Жыл бұрын
Hey Charlie!
@russellwaterman9992
Жыл бұрын
Those old Detroit's never cease to amaze me
@dennisward1361
Жыл бұрын
Good to see Charly again .
@richardw.foxhall3392
Жыл бұрын
I am so very happy to see you and your friend Charlie in the same place, working on a WILL IT START video. And Charlie is STILL Charlie
@heatherlane9270
Жыл бұрын
And start they did - usually the motors do it's the other 'bits' that cause the problem. Love the greenery attire. Good to see Charlie working on the old graders Great job at Southern Homestead Transformation too.
@michaelbrausch8874
Жыл бұрын
Nothing C&C equipment can’t fix!
@richardcline1337
Жыл бұрын
The oil is in the engine. The dipsticks are in Washington!
@dwaynekoblitz6032
Жыл бұрын
After the 250, your grader is my favorite piece of equipment to watch run. I was so hoping that one of these would actually grade something. I guess at least he knows he still has good engines.
@johnblecker4206
Жыл бұрын
This sure looks to be a special video to watch so thank you again.
@daved7024
Жыл бұрын
Amazing those old machines started right up 😀👍
@hvy1ton
Жыл бұрын
Tell Charlie I appreciate him making a video every now and then again.
@aaronfletcher3971
Жыл бұрын
3 dipsticks in this video. 1 standing on the tire ,1 behind the camera and one in the machine. Looks like all are working and in good shape and all just where they supposed to be. Old iron is the best. Always the best.
@Canopus68
Жыл бұрын
Love the 471. I never worked on one, however in the Navy I worked on 271s, 671s, slant 671s and 610s. If it turned over and it had fuel it would run. I also worked on a Timber Jack skider. I know it was a Detroit and I think it had was a 3 something. One day I came out of the woods with a jag of logs and found I couldn't shut it down. I put the blade against a tree and stalled it. The boss showed up and I told him what happened. He didn't believe so took out the trusty screw driver key and started it. Oddly enough it started, but he had to put against a tree and stall it. Long story short the rack was frozen. I went and got a new injector and a tool to set it. While I was at I got a filter. After installing the injector I pulled the can off the filter holder. The filter wasn't dirty because there wasn't one. I wonder if that had something to do with the injector freezing. A few days later he yelled at me and I left. I saved him at least $100.00 by him not having the dealer send some out and all he could was cuse me out. Not this was around 1974.
@jakleo337
Жыл бұрын
Gota love that A/C compressor right out front. That's grading in comfort.
@pablotejeda4394
Жыл бұрын
Love to see the toy yard most people consider to be junk but, when they crank right up they wonder what happened with the thought they considered to be junk. Lol! Junk never starts up in my opinion. Thanks for the video and look forward to seeing Charlie help make the road of concrete aggregate soon
@michaelpage1796
Жыл бұрын
Well that was odd. An old grader with brakes. Usually old graders don’t have brakes. Love your visits to Charlie
@TheChunky2010
Жыл бұрын
Yay, Charlie time. It’s great to see you two back together
@bobkohl6779
Жыл бұрын
Love the warning beeps! Captain she's going to blow!! 😉
@philippephilou8116
4 ай бұрын
Hello, congratulations for your videos from France, Letsdig18, superb. Bonjour, un grand bravo pour vos vidéos depuis la France, Letsdig18, superbe. Philippe
@astro1218
Жыл бұрын
Always some good videos visiting Charlie
@cityguyinthecountry
Жыл бұрын
I've been a fan of his videos for a long time now, he never disappoints!
@keithwilson9153
Жыл бұрын
Need more videos with Charlie and starting the old Iron
@dennis2376
Жыл бұрын
Thank you and have a great day.
@KB-gs8zi
Жыл бұрын
Hey Chris !! Is Charlie looking to get these graders running for that soil rebuild that he does ?? Neat to see them start up anyway !! 🙃😊🤔🤔👍👍👍👍👍
@snowblowerman5115
Жыл бұрын
No he wouldn't use them for his soil cement operation. Can't really fine grade with machines like that charlie also said he's spoiled with his 872 deere and his cat grader. Like he said in video them ole graders would be cool to mess with on his property but there jobsite days are over
@paulmartin8212
Жыл бұрын
those old detroit diesels are amazingly reliable. He's lucky the rack didn't stick wide open .
@michaeladams8532
Жыл бұрын
Glad to see Charlie. One heck of a guy
@chasebodiford4363
Жыл бұрын
great job buddy and great video as always buddy 😎👊🏻👍🏻 be careful of the briars good to see Charlie again
@AncientHermit
Жыл бұрын
At least Charlie was still running and did not need a boost start.👍😀 Not seen him in a while. 🤔Good that he's ok. 🤨Be well.😉
@scrotiemcboogerballs1981
Жыл бұрын
It’s a shame those are just sitting rotting away amazing they started so easily thanks for sharing
@cityguyinthecountry
Жыл бұрын
I always enjoy watching his content.
@mfelton7041
Жыл бұрын
Lovely to see Charlie
@harrykeel8557
Жыл бұрын
Always good to see old equipment brought back to life.
@cityguyinthecountry
Жыл бұрын
His videos are really impressive, I can tell he puts a lot of effort into them.
@mikes7639
Жыл бұрын
Me too thats a good man charlie is-one of the most competent guys i have ever seen
@johnhicks735
Жыл бұрын
That looks like A good candidate for fixing back up.& Repairing to put it back in use. If it's just something as simple as parts like those. Especially if you never checked any of that out on that machine yet at all either. From over the years of just setting in the woods. Like I see it has been doing to.
@dougyurecko6500
Жыл бұрын
Great seeing Charlie
@donnaflanagan6612
Жыл бұрын
Well, that was a bit of fun. You were almost taken out by a flying acorn Chris 🪖Good to see Charlie. Take care & cheers🐨🦘🥰
@nealequipment3777
Жыл бұрын
those jump pack are amazing, I have one so handy
@steves9915
Жыл бұрын
Good to see Charlie didn't fall into some concrete mud! But he must be a busy man.
@pinecone01
Жыл бұрын
Ol' Detroit 2-strokes don't die, they just go to sleep for a while!
@cityguyinthecountry
Жыл бұрын
His videos are some of the best out there, I'm constantly impressed.
@cityguyinthecountry
Жыл бұрын
He has a real knack for creating high-quality content.
@jerry3041
Жыл бұрын
I'd love to buy one of those
@mabloodhound
Жыл бұрын
Diesel Creek or Hamiltonville Farms would be envious.
@akdonlh9924
Жыл бұрын
I’m thinking Matt from DC would love this yard!!!
@andysukosd8177
Жыл бұрын
Fantastic video, love watching. Charlie. is a great guy.
@copperheadmarine
Жыл бұрын
Actually just got promoted from "Major " to "Complete &Total" .....in the Catagory of A hole lol
@cityguyinthecountry
Жыл бұрын
He has a real talent for making engaging videos.
@corycourneyea6802
Жыл бұрын
There is a guy we haven't seen in a while
@Fatamus
Жыл бұрын
I know Chris must have unsubscribe me.🤣😂🤣 too many messages without the words 'telegram me' 😉😉😉..... 🤫
@dansevern3291
Жыл бұрын
Crazy, I've got tractors I used last week that I bet won't start up that fast.
Пікірлер: 471