Great job on this project! It was very helpful! I have a Rebel 500 and the suspension is terribly soft. I just replaced the rear shock with some Progressive 430 shocks meant for a Harley XG750(?). It made it quite a bit firmer, and raised it a little, so that was a welcomed surprise. I'm just in the process of putting my Commander III Cruisers on and I also just installed a set of HyperPro Springs along with a made up concoction of fork oil...I'm guessing I'm somewhere around 23-25W oil. I'm a big guy, so hopefully that makes the front end more appropriate! Working on the bike is super easy, everyone! You can do it with some simple tools! Safe riding everyone!
@daniellebillington3340
17 күн бұрын
I just had the hyperpro 15mm progressive installed with their recommended 10w oil and man I feel every bump. Gonna revert back to stock.
@Josh-cd4pt
2 жыл бұрын
Excellent work on this video! Clear, concise, and high quality! Much appreciated
@goinhigher
2 жыл бұрын
Thank you for the kinds works and glad you’re enjoyed the video!
@patrickmarcolla8359
Жыл бұрын
Thanks for a terrific video. As a new Rebel 500 owner, it gives me confidence to think I might be able to do this myself!
@jeffhogueison1656
3 ай бұрын
They definitely need to be stiffer and this is a nice way to help it out some. Anything is good.
@tooez7397
3 жыл бұрын
Thanks for all the details. I like the fact that you included torque spec. I’m going to use this video when I install fork boots, covers and cowl. 👍🏽
@goinhigher
3 жыл бұрын
Glad it helped. I pulled all the torque specs from the Honda service repair manual.
@alw0756
Күн бұрын
I added fork covers and accidentally put the forks flush instead of how you did. Is it necessary for me to fix that and if so can is it possible to do without having to take everything off again?
@omarmr.i9676
2 жыл бұрын
Great how to video brother. It comes very handy when servicing my bike. I will be honest. I would rather just change the springs, but I am glad that you shared the outcome, so we can make the decision. Again great video...
@goinhigher
2 жыл бұрын
Thank you and glad it helped. Changing just the springs is really the way to go. I went this route only bc I couldn’t get my hands on the spring kits and was kinda curious about what kind of different the oil would make.
@alexeyklimeshov6027
Жыл бұрын
Very good manual👏👏👏 Thank you for your help 👍
@alejandronavgar8798
Жыл бұрын
Nice video and good job. I think I'm going to change the front springs on my 2022 Rebel, the suspension feels very soft and it bottoms out easily. Although in my case, I am going to take it to the workshop, I do not consider myself with the ability to do it myself. Greetings. ✌
@BarongInside
2 жыл бұрын
Hey, fellow rebel rider here, nice video. I have a question, after the 10w to 15w oil swap do the front fork still has that "drag bike" feel, to be honest the softness of the front spring kinda bothers me usually at launch and acceleration, do you think I should change the spring kit?
@goinhigher
2 жыл бұрын
Thank you! Yes, there still is a bit of softness during acceleration. I would change out the spring kit for sure. The heavier weight fork oil just prevents the suspension from bottoming out. The general ride quality feels more or less the same. When it warms up a bit here in NY, I plan to purchase an Ohlins spring kit. I'm hoping the spring kit will stiffen up the suspension.
@jackturner1446
2 жыл бұрын
Great video. Keep ‘em coming! Thanks
@goinhigher
2 жыл бұрын
Thank you! More vids on the way this summer for sure.
@viperultra12012
2 жыл бұрын
wait you installed only new oil and the overall height lowed ? why ? Is it OK like that do you feel the difference ? I would also like stronger stiffness but i dont know if i want to lover my front fork.
@goinhigher
2 жыл бұрын
The height of the forks remained the same. Only the travel of the forks was reduced by 0.5 inches. I feel a very, very slight difference. The major difference is I noticed the forks won't bottom out as they did occasionally with the 10W oil. I had originally planned to install an Ohlins spring kit with the new oil, however, the kit was backordered. I may try again this summer with the new springs. It would have been better to try with with a 20 or 25 weight fork oil versus the 15.
@MarioRaguex-u9g
11 ай бұрын
Cuantos ML. le caben es un litro o menos porfavor información, mi moto es una honda rebel 500 modelo 2018
@ivanbecerra9610
2 жыл бұрын
Great video!! Have any vidoes on replacing fron brake line?
@goinhigher
2 жыл бұрын
Thank you! I don't have any videos for replacing the front brake line unfortunately.
@dalegarrard9446
3 жыл бұрын
Wish I had your mechanical skills. I think my Rebel would be well served if I had my friendly Honda dealership take care of such improvements.
@goinhigher
3 жыл бұрын
Thank you! I’m a hobby mechanic at best but I enjoy getting my hands dirty and making sure the job gets done right. Bring that Rebel in for some TLC!
@kevk9863
2 жыл бұрын
I'm contemplating installing aftermarket springs on my 2017 CMX500 so I'm very interested in anyone's experience regarding this.
Пікірлер: 27