Just got dt990 pro's with 250ohms and was thinking about this amp. Now I got the info I desperately needed and I'll order this Amp asap. besides, really enjoyed the video and your personality. Subscribed, liked and commented! Stay Awesome!
@CustomCans
Ай бұрын
Welcome aboard ;)
@NodaMixMusicTM
25 күн бұрын
@@CustomCans quick question, just to make sure. I have a Scarlet solo 3rd gen audio interface that can't provide enough power to drive my 250 ohm dt990, that's why I ordered this Fosi Ph05 amp, am I on the right pass here? gonna use Scarlet's Headphone out, connect it to Fosi Amp and then connect my dt990 to one of it's outs. is it gonna work? I'm asking because when I watched your video again, I noticed you used another amp in line before Fosi.
@RomeroRafael100
4 күн бұрын
@@NodaMixMusicTMhi i got the same combo and was considering getting this amp. Did it work for you? Ill use it for mixing but was thinking if this amp wouldn't druve my 250ohms 990 properly or get any hiss/noises when connecting them.
@NodaMixMusicTM
3 күн бұрын
@@RomeroRafael100 the sound quality is good, the volume not that impressive, I mean the loudness, I would like it to be 30% more but it does the job. sounds better then with Scarlett solo only.
@MFKitten
4 ай бұрын
I just modified my EARS today. Unstuck the microphone from the chassis (it's just gooped on with caulk), pulled the cable out, and stuck it into the silicone ear canal so it's all the way at the entrance instead of at the back. I'm very happy with the resulting measurements. Of course if you're going to keep using your EARS as a back-compatible platform to check with old measurements etc, you should buy a second one to do the mod. But I do recommend it. The ear canal is NOT simulating a real ear canal resonance, and the calibration files do NOT correct it accurately. without the esr canal resonance you get a WAY better result!
@CustomCans
4 ай бұрын
At the moment the E.A.R.S is fine for what I do, comparing A with B and I so I can see any changes that happen during mods. Hopefully this year we will have a little extra money in the budget as we can buy a fancier test rig to get more accurate readings. The EARS will then be handed down to the workshop who can use it for testing headphones for faults
@bbwslayer333
Ай бұрын
Which is the best for gaming paired with a Topping Dx 3 pro+? 80 or 250ohm? Thanks
@CustomCans
Ай бұрын
I would say the 80ohm would be the one to go for
@n11n12
4 ай бұрын
Aw jeez. My only DT770 is a 32 ohm model, because I do use them portably quite a bit. The few places that even mention them compare their sound signature to the 250 ohm, but to be honest I've never actually heard the 250 or the 80. I did end up buying the grey velour pads and later Dekoni leather pads, and those have helped the sound and comfort a bit. While I do like their sound (they are my favorite full sized headphone I own) I can't really compare them, and I have occasionally wondered if I made the right choice.
@CustomCans
4 ай бұрын
It is probably all down to personal taste - If you like the sound then you made the right choice ;)
@n11n12
3 ай бұрын
@@CustomCans my birthday was a couple weeks after this post, so I bought myself an 80 ohm DT7770. I'd thought about it for a while, so why the hell not? After comparing them both with velour pads (since I don't have the stock pleather pads anymore), the differences are there, but very subtle. The 32s have slightly boosted bass, while the 80s bass is a bit punchier with a bit more sparkle in the treble. I chalk both of these up to higher detail in the 80s. Overall, I have no regrets either way.
@soulstart89
22 күн бұрын
@@n11n12 your two comments have helped me a lot. I want to get a pair of DT770’s in either 32 or 80. Like you may have said the 80 are designed and sound slightly different. I’ll be using them for playing bass guitar and on computer learning tracks. I may buy both and send back the one I don’t like. Prob get peace of mind. I’m uk based so I’m sure it won’t be a issue
@skarecro7916
4 ай бұрын
I have a headphone amp. Which sounds the best dt770 32ohms, 80ohms or 250ohms? Pricing isn't an issue. Thanks
@CustomCans
4 ай бұрын
I prefer the 80ohm ones
@sulgrave_
4 ай бұрын
"Put this on the jobby here..." I thought jobby meant taking a 💩, or is that just Scotland :-D
@CustomCans
4 ай бұрын
Lol... ;)
@twitchbook-1
4 ай бұрын
sorry for the interruption, but how much would the impact in driver control additing radial magnet to the headphone in terms of creating a lower magnetic pole?
@CustomCans
4 ай бұрын
I am not an expert in driver design but have tried adding larger magnets to the rear of the existing driver and it did not seem to make a huge amount of difference to the sound. I may have a proper play in the future
@KonradSkowronski
4 ай бұрын
Nice video. I am just looking for a new headphone splitter/amp because the one I have degrades the sound, less dynamic, bit darker and compressed like compering wave to dodgy mp3 file - I am talking about Behringer HA400. Have you noticed any changes in the sound via Fosi Audio PH05 vs direct signal? PS And yes, I am using hp splitter to compare headphones at the same volume level :D But main use is for monitoring on stage:)
@CustomCans
4 ай бұрын
Different amps all sound slightly different but I did not notice any issues with the sound - I did only play with it for about an hour and did not directly compare it with any other ams
@KonradSkowronski
4 ай бұрын
@@CustomCans Thanks;) I didn't ask about specific amp sound but rather if there is any sound degradation - like I wrote before - some amp/splitters have just bad designed circuits, mentioned Behringer HA400, where sound is really far form the source output.
@tentofive7917
4 ай бұрын
great review....I hope you can review and modify about Fiio JT1 ... thanks
@kl4rky
4 ай бұрын
Currently this is $40 usd inc shipping as fosi have 20% off code on the website. Just ordered one so I can have multiple iem/ headphones ready to use at the turn of a knob.
@kl4rky
4 ай бұрын
That was free shipping to the UK also.
@CustomCans
4 ай бұрын
That is very good value especially considering how well it is built
@anakinwolfgang5101
4 ай бұрын
Hello, may i ask, do u sell the dt 1990 driver kit?
@CustomCans
3 ай бұрын
No we don't - you can get it from Polar Audio in the UK or thomann or beyerdynamic in europe
@gjokaledjon2
4 ай бұрын
When will we have any video about any physical tuning to resolve the 200 hz dip on the dt 700 pro x?
@Shifterfire
4 ай бұрын
I'm waiting for any DT 700 mod :p, the 4k dip mainly tbh
@gjokaledjon2
4 ай бұрын
@@Shifterfire I don’t think that one is technically possible but the 200 hz one should be
@CustomCans
4 ай бұрын
@gjokaledjon2 Ok ;) I have just about finished the HiFiman Edition XS which has taken several months longer than I expected - next I will do the Pro X series
@gjokaledjon2
4 ай бұрын
@@CustomCans Looking forward for those videos and I appreciate your hard work🙌
@Shifterfire
4 ай бұрын
@@gjokaledjon2 How so? I expected it to be caused by some resonance or something
@GwakGwak_3000
3 ай бұрын
can I use this with a DT990 PRO? 250 OHM
@CustomCans
3 ай бұрын
Yes it would work nicely with those
@Cp48533
4 ай бұрын
I love fosio audio ❤
@CustomCans
4 ай бұрын
They do seem like a lovely company. After we donated this to the music works, fosi contacted them and offered to donate another 10 to support young musicians... I lovely gesture
@Cp48533
4 ай бұрын
@@CustomCans very nice of them :)
@twitchbook-1
4 ай бұрын
like recreating a hypercardiod polar pattern!
@CustomCans
4 ай бұрын
I like driving fast cars and DJing ... we all need our hobbies ;)
@SheikhAbdulIkrom
4 ай бұрын
I am very impressed with your KZitem channel content and your video thumbnails are very amazing. But your KZitem videos are not SEO-optimized? If you SEO-optimize your videos then your channel will grow more quickly day by day. I am a professional KZitem video SEO expert. I can cooperate with you to grow your KZitem channel. If you are interested let's have a small Zoom meeting to discuss.
Пікірлер: 43