Just bought a 96’ this video was very helpful plan on watching your brake video because at the moment I have no breaks
@daveraymond2265
Жыл бұрын
Glad it helped. Thanks for watching!
@EricPoulsen
Жыл бұрын
Thank you for this -- was very helpful.
@Shookiiee
2 жыл бұрын
Next time your removing the cv from the knuckle just remove the shock bolt from the upper control arm and then you can loosen the control arm bolts and swing your arm up and slip the CV out
@taylorg223
Жыл бұрын
Great video , going to attempt with a c clamp
@noahjagger3831
Жыл бұрын
I’m getting ready to do my axles, ball joints and wheel bearing on mine is there a certain size ball joint removal tool?
@daveraymond2265
Жыл бұрын
I used the standard ball joint press tool with sockets that would work.
@CbrF4i600cc
Жыл бұрын
Normal C clamp work?
@daveraymond2265
Жыл бұрын
This Tool is super heavy duty much stronger than a C clamp. You can try and you may have success
@jacobwilliams7953
Жыл бұрын
What’s that tool called where your removing lower ball joint front control arm?
@Day12My
Жыл бұрын
16:21...You shouldn't have to tap it in. It just pushes in pretty easy
@daveraymond2265
Жыл бұрын
I am tapping it past the expanding retainer clip. You cannot just push it past that clip if the clip is doing its job 👊
@Day12My
Жыл бұрын
@@daveraymond2265 I disagree. I do it all the time. I mean if you can pull it out you should be able to push it in.
@daveraymond2265
Жыл бұрын
@@Day12My The clip is there to keep it from coming out easily
@69dwjohnson
3 ай бұрын
@@daveraymond2265 I agree , it needs to be taped in the way you did it.
Пікірлер: 16