Hope this helps you new builders out there! Also, I accidentally recorded the whole thing in 1080p instead of 4K my bad.
@lubibubi6380
2 жыл бұрын
You forgot to mention that on the driektly power-In-Battery pad on the FC you need to solder also an Kapacitor to avoid Voltage slickes which can leed to frieng you FC
@somefish9147
2 жыл бұрын
@@lubibubi6380 you dont need to at all
@vidya4006
Жыл бұрын
Anshu
@originafreerangechicken
3 жыл бұрын
Super Legit content right here. I’m always shocked how hard and rare it is to find good quality instructional videos for absolute beginners. This is my new go-to reference vid. I’ll send all the noobs to you. Great freekin job.
@supafpv1759
3 жыл бұрын
Thanks a ton man for your kind words! I’m here if you have any questions or concerns.
@tomatojet9495
2 жыл бұрын
So awesome that you made all the intro video with fpv crash compilation 😅
@FOCKHOUSE
3 жыл бұрын
As someone who has consumed almost all the videos from from the big channels and more, I wish I would have had this video when I started out. Best Mamba breakdown. Quality video man. You deserve far more subs. Keep it up.
@supafpv1759
3 жыл бұрын
Dang man thank you so much man means a lot to me!
@HomeDronen
3 жыл бұрын
Thanks you my friend. I've been in this hobby for about 5 years , and you touched on something that really helped me out when you connected the VTX. It goes to show that we all learn something every day... Cheers and happy flyin! 🖐️😎👍
@uselessgagachad9761
3 жыл бұрын
Extremely useful which no one talked on this clearly in KZitem❤ I'm new Subscriber.. This guy deserves more subs☹️
@supafpv1759
3 жыл бұрын
Thanks for the sub! Glad my video could help you out!
@seekfpv
Жыл бұрын
I really appreciate this video bro I was bummed to see you weren’t making any new videos BUT you helped me so so much , thank you for doing that in such a respectably understanding and fluent manner.
@snomanfpv306
3 жыл бұрын
Thank you for posting this!!!! I'm not so afraid of actually trying to build my first drone. Always bought bnf quads or was given an already build quad. I will be firing up the soldering iron real soon. Oh yeah, I subbed too.😊
@supafpv1759
3 жыл бұрын
Haha glad it was helpful man! Always love seeing more and more people into building their quads! Welcome to the channel!
@BrunoParnell
3 жыл бұрын
Literally bought my first soldering kit today, this is so well done and more concise than any other video for newbs out there. Thank you and I hope it gets a lot of views.
@supafpv1759
3 жыл бұрын
Dang man that’s some timing haha! Thank you man I’m hoping it helps a lot of people! If you have any questions please either comment or email me at the email in my about section I’ll try to help out!
@BrunoParnell
3 жыл бұрын
@@supafpv1759 Thank you! Subscribed and looking forward to the build video!
@tijmenkodden4996
3 жыл бұрын
Finally someon explaining it better! love the video
@supafpv1759
3 жыл бұрын
Glad I can help!
@zingzing_media
2 жыл бұрын
I'm building my first 5" quad and I have this fc, your video has helped me tremendously and I'll be using it during the actual build to know what goes where thanks for sharing this and you have my sub 👍👍
@tojikdominic
Жыл бұрын
This is the channel I was searching for. Thanks for the realistic explanation. This helps a lot in planning to build my first fpv. Let me know how can I contact you to get some assistance. :)
@BrainDeadEngineering
2 жыл бұрын
Excellent. Clear and precise ! On my way to building my first drone 0_o . pray for me ! Cheers
@supafpv1759
2 жыл бұрын
Thanks man! Welcome to the quad community! I wish you the best!
@oihdnuoc679
3 жыл бұрын
Thanks, helped me a lot.
@supafpv1759
3 жыл бұрын
Glad it helped!
@davidgautier5088
3 жыл бұрын
Extremely pedagog!!! Thank you!! Please do many videos
@supafpv1759
3 жыл бұрын
Thanks man!
@pofrani
3 жыл бұрын
Thank you - this has been helpful!
@supafpv1759
3 жыл бұрын
Glad it helped!
@GhostFpv
3 жыл бұрын
Yes sir. !Nice video good pace and professional editing 👍👍👍. Keep it up I really enjoyed your video.
@supafpv1759
3 жыл бұрын
Thanks boss! I appreciate that!
@gazfpv
3 жыл бұрын
This is great info brother 👍 🇬🇧 😀 👌 top bloke. 👍
@supafpv1759
3 жыл бұрын
Thanks man! I always love your comments haha!
@Senseo222CookieMonster
3 жыл бұрын
Underrated !!!
@supafpv1759
3 жыл бұрын
haha I appreciate it man!
@lucavstraaten9918
3 жыл бұрын
Thx dude! Just build my first quad thx to you!
@supafpv1759
3 жыл бұрын
I’m glad the video helped! Welcome to the world of fpv!
@DaveyFPV
3 жыл бұрын
Wish I had this video when I was starting FPV.
@supafpv1759
3 жыл бұрын
Hopefully it helps the newbies out there!
@OLEHFPV
3 жыл бұрын
can you make a video on how to set up the led pad and another tx or rx pad
@aslamnazar8497
2 жыл бұрын
Thanks Alot for this. I am just starting doing my first build and this is of great help. Hope i will hit the skies in few days,,,
@sapmibooy
3 жыл бұрын
Hi! Isn’t the RX6 used between ESC and FC? Can I use the uart 6 then?
@supafpv1759
3 жыл бұрын
Yea I mention it depends on the specific flight controller. Some times rx6 is used for Blheli 32 esc telemetry. I use it all the time on this flight controller I showcase in the video. Unless you have blheli 32 escs then you don’t have to worry.
@sapmibooy
3 жыл бұрын
@@supafpv1759 Okey! Thanks for good video btw!
@stevedeluxe
Жыл бұрын
My Caddx Vista has sbus. Should I wire that too? As I understood it’s only for DJI Remote control, right? But I have a tbs Tango 2 😕
@DstruX
3 жыл бұрын
Nice vid man. Sure will help out people coming in. 🤘
@supafpv1759
3 жыл бұрын
Thanks boss that’s what I’m hoping for!
@OLEHFPV
3 жыл бұрын
so i lost my drone cuz i flew too far away and didint have gps so now im putting one on will this have any issues with this controler
@supafpv1759
3 жыл бұрын
Yea shouldn’t be a problem as long as you got an open UART
@OLEHFPV
3 жыл бұрын
@@supafpv1759 i had the smart audio set up on uart 1 which was used before for sbus for the xm+ but i got tracer so i pput it on uart 3 and i had uart 6 but the RX6 is used in the connector to the esc so can i use uart 6 for gps?
@supafpv1759
3 жыл бұрын
@@OLEHFPV do you have blheli 32 ESCs? If so then no.
@jackjohnson5024
2 жыл бұрын
Can I use 800mw from the 9v? The mamba instructions says the inbuilt bec is good for less than 800mw but 800mw draws 380ma and the 9v pads output up to 2a
@supafpv1759
2 жыл бұрын
I’ve done it on my 7 inch. Got my VTX that goes up to 800mw soldered to the 9v pad.
@levig-man4103
3 жыл бұрын
What about the inverted Sbus Signal from Frsky ? Do this F405 in-inverted it ?
@alaingosselin8764
3 жыл бұрын
Very nice , big like in the way you explained it , it’s not like the old days wene I first started, was not to shure what I was geting into, lol lol , was making own harnesses... 👀 pretty amazing what we have today to work with , very nice ✌️👍
@supafpv1759
3 жыл бұрын
For real! at this point in time it’s fairly simple to make FPV drones! Thanks for the continued support man!
@DANKFPV
3 жыл бұрын
Valuable info! Wish I could have found this video when I started. I remember using a different video for each component lol.
@supafpv1759
3 жыл бұрын
Thanks haha yea that’s what my reasoning was when making this video! Hope it helps future fpv builders!
@garamfpv
3 жыл бұрын
Brother than good information for beginners👍🏻👍🏻😎👌🏻👊🏻
@supafpv1759
3 жыл бұрын
Thanks man!
@NionXenion-gh7rf
6 ай бұрын
Thanks bro, i am absolute beginner, i wonder can we connect cam wire directly to transmitter, totally bypassing main controller😃
@rre9518
2 жыл бұрын
Thanks, on target for a newbie like me.
@supafpv1759
2 жыл бұрын
Glad to have helped!
@markiemark7018
3 жыл бұрын
Nicely done , i enjoyed watching this 🔥👍🏻
@supafpv1759
3 жыл бұрын
Thanks man! I appreciate it!
@xDarre
3 жыл бұрын
make a carrier under the drone and fly the cat. world's first flying calico
@edarre
3 жыл бұрын
Yes!
@supafpv1759
3 жыл бұрын
HOW DO YOU KNOW I HAVE A CAT
@xDarre
3 жыл бұрын
@@supafpv1759 I KNOW EVERYTHING ABOUT YOU IM YOUR BIGGEST FAN INVITE ME TO YOUR HOUSE
@Diggsiii
3 жыл бұрын
great vid bro
@supafpv1759
3 жыл бұрын
Thanks man!
@garplin
3 жыл бұрын
hey where do you solder an ibus connections with flysky....is it uart 6 or uart 3
@supafpv1759
3 жыл бұрын
Any open UART should do perfectly fine
@garplin
3 жыл бұрын
@@supafpv1759 is this for the mkii as well
@supafpv1759
3 жыл бұрын
@@garplin yea general rule is as long as it’s an open uart and you have serial rx turned on in beta flight you’re good to go
@garplin
3 жыл бұрын
@@supafpv1759 nice man thanks alot
@gtaitbiz7787
2 жыл бұрын
Can a mamba H7 connect to. Frsky receiver? Are you available to answer questions via email?
@MrBenny944
Жыл бұрын
is possible to attack servos in this flight controller? i'm going to build a chinoock and i need a controller for 2 motor and 2 servos ...nice video :D
@fladoodel
3 жыл бұрын
what do i do with the blue wire from the camera
@enarramore77
3 жыл бұрын
nice layout well explained
@supafpv1759
3 жыл бұрын
Thanks man!
@slappomatthew
Жыл бұрын
can this FC connect to walksnail/dji?
@RCRitterFPV
3 жыл бұрын
isn't that "plate" an interference shield? put between ESC and FC to reduce noise? i'm kinda guessing...
@supafpv1759
3 жыл бұрын
I’ve thought of that before to be 100% honest with you, but it’s like significantly thick and chunky. I know the new mamba stacks like the super new ones they’re shipping out starting like two weeks ago come with a nice thin noise reduction sheet and it looks nothing like this. I’m sure you could use this to do the same thing tho lol
@udhyt5086
2 жыл бұрын
Sykstar f4 Or f7 which is better?
@eagle7015
3 жыл бұрын
How to connect ibus?
@supafpv1759
3 жыл бұрын
Same way you’d connect to frsky or tracer but with ibus wirings
@eagle7015
3 жыл бұрын
@@supafpv1759 yea got it thanks
@alperenarslan6036
3 жыл бұрын
If we have a transmitter that supports smartaudio, do we have to connect it to the board?
@supafpv1759
3 жыл бұрын
A video transmitter? Yea if you have one you should connect it but it’s not 100% necessary for it to function as a vtx
@alperenarslan6036
3 жыл бұрын
@@supafpv1759 my english is not perfect :) thanks for your answer
@supafpv1759
3 жыл бұрын
@@alperenarslan6036 no worries happy to help!
@thelazerproject
3 жыл бұрын
Thanks for the tutorial man 🤙🙏
@supafpv1759
3 жыл бұрын
Of course! Happy to help!
@svenniefpv
3 жыл бұрын
nice video man, if you are new to the hobby definitly helpfull!
@supafpv1759
3 жыл бұрын
Thanks man! And for sure that’s what I was hoping for!
@fabvelloso
3 жыл бұрын
Can we hook up a 12V VTX?
@enarramore77
3 жыл бұрын
🤘😁🤘
@tomforstmann9977
3 жыл бұрын
Hey man, really cool video, thanks for that! I have a short question: I am thinking about getting a tbs unify pro32 HV, but for OSD power selection it requires smartaudio 2.1 and while I know only betaflight 4.1 is capable of that version, I am not sure wether the f405 m2 is compatible with it. I couldnt find this specific information anywhere. Maybe, by chance, you could tell for sure? Any information on this would be highly appreciated :)
@supafpv1759
3 жыл бұрын
Yessir you should be able to do tbs smart audio 2.1. That’s not limited by these boards
@tomforstmann9977
3 жыл бұрын
@@supafpv1759 ohh really nice, thanks m8, you just earned a subscriber :D
@supafpv1759
3 жыл бұрын
@@tomforstmann9977 I appreciate it man! Welcome to the channel!
@tech-wondo1135
3 жыл бұрын
I was skeptical where and how to start building a drone being a hobbyist, thanks a ton man, for creating super instructional video for us DUMB DUMBs 😂
@supafpv1759
3 жыл бұрын
Of course man! Welcome to the hobby!
@GraDash
3 жыл бұрын
what is tracer for ?
@supafpv1759
3 жыл бұрын
It’s a receiver for your controller/radio
@rafaelmoran6777
2 жыл бұрын
Take a shot everytime he says uhh... P.s. good video. 👍
@albertofucarino9863
3 жыл бұрын
29:00 please help, how can i do it?
@supafpv1759
3 жыл бұрын
oscarliang.com/betaflight-soft-serial/ Should help you out!
@fpvcinematic69
3 жыл бұрын
Vid is great but you explain tooo much
@supafpv1759
3 жыл бұрын
It’s quite a beginner friendly video that’s why I wanted to provide as much information as I could
Пікірлер: 116