Hey Everyone! Welcome to episode 13 of our RAM Pro-master 2500 van build/conversion series. In this video, we begin framing the inside of the van as well as do some much needed repair on the headliner. We have been really excited to get to this part of the build, because once the walls are up it will really start looking like a home. This video, specifically, tackles the framing of the roof. We really went the extra mile to ensure that everything was straight and even, which is so important since the cabinets and ceiling will attach to it. While Marc is in the van, Tania is giving the headliner a makeover. When we got the van, the headliner fabric was pretty nasty. Watch how we give it some love and make it look brand new. We truly hope you like the video and that it helps with your own build.
If you have any questions, please feel free to leave a comment below, and please give a thumbs-up if you enjoyed this video and found in helpful to you. Subscribe to our channel to follow along on our entire van build series.
Blessings to you.
-Marc and Tania
---------------------------------------------------
Links to products we used in this episode:
Lumber:
1x3 pine (look for the straightest stuff you can find). We bought common boards, not the select stuff.
1/4” x 2 1/2” Poplar (from the hobby section of HD or Lowe’s)
1x3 PVC trim boards
Tools
Cordless Drill (I use this one): amzn.to/3mq1NyL
Cordless Jigsaw (again…love my Makita): amzn.to/3oBItRI
Cordless Impact Driver: amzn.to/3JIR5Ov
Wood jigsaw blades: amzn.to/3t49sYx
Drill bits (for both wood and metal): amzn.to/3mWRkvP
Astro 1450 PlusNut tool: amzn.to/335iSYv
Tape Measure: amzn.to/3qSpLov
Woodworkers Square: amzn.to/3zpFBL0
Marking Pencil:
Really Long Straight edge
Wood Plane
Misc:
Rustoleum Protective Enamel: amzn.to/3eOUTQ4
Paint Brush (We actually just used Q-tips)
Painters Tape, Sharpie Marker
Safety Glass and Gloves
Black Rustoleum (for painting the black plastic covers)
Headliner Fabric (Joanns)
Headliner Adhesive (Joanns)
Stainless Steel Hex Bolts: amzn.to/3te39Sj
Stainless Steel Washers: amzn.to/3EVil8Q
PREVIOUS VAN BUILD EPISODES
Episode 1: Cleaning and Rustproofing: • Cleaning and Rustproof...
Episode 2: Removing the Partition Wall: • Removing Partition Wal...
Episode 3: Soundproofing the Van: • Soundproofing the Van ...
Episode 4: Installing CRL Bunk Windows: • Installing CRL Bunk Wi...
Episode 5: Subfloor (part 1): • Installing the Subfloo...
Episode 6: Subfloor (part 2): • Installing the Subfloo...
Episode 7: Subfloor (part 3): • Installing the Subfloo...
Episode 8: Scopema Swivel Seat Install: • Scopema Swivel Seat In...
Episode 9: Installing a Urethane Window: • How Not to install a U...
Episode 10: Installing a CRL Sliding Door Window: • Installing a CRLSlidin...
Episode 11: Insulating with Havelock Wool: • Insulating with Havelo...
Episode 12: Installing a MaxxAir Fan: • Installing a MaxxAir F...
If you like any of these videos, please consider subscribing. And click the notification bell to be alerted when we release a new video.
• #vanbuild
• #vanlife
• #campervan
• #vanconversion
• #homeiswhereyouparkit
• #vanlifediaries
• #homeonwheels
• #projectvanlife
• #tinyhome
Негізгі бет Framing the Roof and Renovating the Headliner: Part 13 - RAM Promaster 2500 Van Build
Пікірлер: 27