I have had mine for 3 years. I love it & highly recommend it.
@andy79z28
Жыл бұрын
I have this unit around 3 years now. I have done 1000's and 1000's of cases on it. Works great. And you got a great price on it.
@243Outdoors
Жыл бұрын
It’s definitely worth it. I’ve had my eye on them for a few years now. Finally justified it.
@CrankyCleatus
Жыл бұрын
Cool unit. Never saw their trimmer in action, thanks for sharing.👍
@243Outdoors
Жыл бұрын
It’s pretty simple to use.
@ocean374
Жыл бұрын
Nice unit great detail video thanks for sharing
@243Outdoors
Жыл бұрын
You’re welcome.
@Paul-dc6sp
Жыл бұрын
Very nice and accurate. A lot easier than chucking a case into a drill.
@TheDoctorbob12
4 ай бұрын
Very good. I was happy to see you measure after you deburred and chamfered.
@josephlong7420
Жыл бұрын
I needed that for my 6.5 grendel brass converted to 6arc. 150 of those things on a lyman hand trimmer. Oh my poor wittle fingers.
@243Outdoors
Жыл бұрын
I agree. Even with a drill adapter it’s still tiring.
@cw2a
Жыл бұрын
Its a good unit!! Nice video man! ♥️🇺🇸🤘🏼
@243Outdoors
Жыл бұрын
Thanks CW
@jh5869
Жыл бұрын
Very cool, Josh. I have the Lyman unit. I have to use the Lee case length gage to trim on it.
@243Outdoors
Жыл бұрын
That works too. As long as you don’t have to do it by hand.
@jh5869
Жыл бұрын
@@243Outdoors Yes Sir, that’s what I meant. I use the Lee stuff on the Lyman unit. Missed you in TN. Maybe we’ll get together sometime next year.
@ThecrazyScotsman
Жыл бұрын
Nice, I use the Hornady handheld but it gets tiring after a while having a bench option is great
@243Outdoors
Жыл бұрын
I usually trim 100 at a time so it was time to try something else.
@longshotdiedtired1582
Жыл бұрын
I’m using my he Lee handheld trimmer , I end up with bloody knuckles every time I use it 🤣
@fireyourrocketts
10 ай бұрын
Got mine for $150.00 takes a week and half to arrive but worth the wait, now i will include 762x39 besides .223 loading
@jamespollard1670
Жыл бұрын
I like 300 blk , it rarely needs trimming . 😄
@243Outdoors
Жыл бұрын
I've got some 300bo that's been fired 4x and it's still .004 under min trim length.
@bhhacker
Жыл бұрын
I use all sorts of different brass. I wonder how bif of a headache it would actually be to not have everything the same.
@irmaperez-bm8kk
Жыл бұрын
So you can only trim cases that has a shoulder??
@243Outdoors
Жыл бұрын
Yes
@MrBarbuster
Жыл бұрын
you got it at right time now $168
@243Outdoors
Жыл бұрын
The prices seem to go up and down quite often.
@Morskia
Жыл бұрын
Where can I buy this red device attached to the caliper? I can't find it...
@theman-pc2ej
6 ай бұрын
Its kinda pointless.. id amagin hornady has one
@andrewroman1705
Жыл бұрын
What brand caliper do you have?
@shitbird55
Жыл бұрын
What do you have on you caliper to make the brass sit level?
@243Outdoors
Жыл бұрын
It’s a Hornady Anvil. Part of the the comparator set.
@jacobmcdevitt5056
Жыл бұрын
What calipers are those? Also what attachment is on it to level the measurement??
@243Outdoors
Жыл бұрын
The calipers are just a cheap AutoZone set and the attachment is a Hornady Anvil. It’s part of their bullet comparator / headspace set. Just gives you a larger flat surface to measure from.
@jacobmcdevitt5056
Жыл бұрын
@@243Outdoors gotcha I appreciate it. I ask because I'm trying the lyman trimmer and hornady calipers and don't get consistent readings with them and it's frustrating. I saw that and thought maybe it'd help get level even readings.
@chrisaguirre7018
6 ай бұрын
just leave the o ring on. no point in removing it and you're adding steps and issues.
Пікірлер: 36