Thanks for the video. Do we have to do the same for scale and rotate? BTW, how do I move points of a 2D draft and make them snap to points of another part, e.g. the end point of an 180deg arc to the corner point of a rectangle ?
@MangoJellySolutions
3 жыл бұрын
Glad you liked the video. You can do the same with scale and rotate if you desire by using the same method. I haven't tested them but I can't see any reason why they shouldn't work. Regarding the draft move, I found that if I switch off all the snapping options then and enable one it's much easier to understand which one I need. It gets pretty confusing if you have more than two enabled. I think you need the one that's snap to end points selected.
@kklol07
2 жыл бұрын
what does snap midpoint dO?
@MangoJellySolutions
2 жыл бұрын
When using something like the move or rotate to it will snap the item you are moving or the cursor to the mid point of your geometry. So if its a line then it will be the middle of the line, if its a circle then its the center of the circle. If you had a sketch made up of arcs lines etc you will see a whit dot appear at the centers as you move over them.
@bambukouk
3 жыл бұрын
Pardon my ignorance, please why would you want to use move instead of transform? unless (i guess) to have snap align tools as well as move?
@MangoJellySolutions
3 жыл бұрын
No problems, you have guessed the answer, it exposes the snap align which gives you more control over the transform. Also you get additional options from the draft move such as copy.
@bambukouk
3 жыл бұрын
@@MangoJellySolutions thank you! this draft workbench is very confusing in it's name and purpose :-) I didn't even bother looking at it until I found it used here: github.com/realthunder/FreeCAD_assembly3/wiki/Create-Skeleton-Sketch still got more questions than answers... :-)
@Berghiker
Жыл бұрын
Can you add some text in a text block in Draft? I want to take some text from excel or word and import it into Draft Freecad. I want to print out the drawing and the text.
@MangoJellySolutions
Жыл бұрын
Yes if you go to draft wb, top menu, annotation, select label. Select the label, On view tab find the display mode, set to 2d text and then find text size, increase the text size. Now select data tab, change lable type to custom and finally custom text set to what you want.
@jocelynlinot4754
2 жыл бұрын
Hello proffessor LOL, very good tip, but it does not work with the version of Realhunter (linkbranch, version of 07/17 and also with the latest version 10/15, it generates an error, shame
Пікірлер: 22