Very nice, I was somewhat expecting some stupid things that is common on this kind of instruction videos but this is first class quality advice from reality and for a true reason based on real experience!
@dive4josvic
Жыл бұрын
Great video.. thanks a lot.. just got my 1st carbon fin.. this video will help a lot
@OhLuckyMan
6 жыл бұрын
I'm just now learning about freediving fins and how to choose them and how to care for them. I learned a lot from you today. I'm sure it will help me extend the life of the fins I purchase. Thanks
@MAB-jj9ie
7 жыл бұрын
those are by far some of the best fin Ive ever tried. Thanks for putting this great video !
@thelastpirate
7 жыл бұрын
Thanks for the fins bro. Definitely my favorite toys on the boat. Appreciate the info.
@myotiswii
Жыл бұрын
I have underwaterrubgy fins that are carbon fiber now. Kinda prefer it to fiberglass and I am at a high enough level that I kinda do need it now. We cant fully avoid the groundscratching but for example you have to learn to push of the wall with your foot and not your blade. I know they wont last forever but thats ok, if they last like a year thats still good value
@twizzler3b
11 ай бұрын
Good, dense info, thank you.
@christianousa9193
2 жыл бұрын
thank you for the video
@rafaelw.6691
5 жыл бұрын
Carbon fibre or fibreglas do not get brittle in UV exposure, but the matrix does (the plastic used to hold the fibres in place). But otherwise good advice.
@benstevens4185
6 ай бұрын
Great video - thank you :)
@robertschweppie5256
2 жыл бұрын
THAT'S WHAT I ENJOY ABOUT CHEAP FIN ....THEY DONT BRAKE
@vincenthamardmorel620
Жыл бұрын
Thanks Nice vidéo!!!
@VovanCBR
3 жыл бұрын
I would add that you can apply car vinyl partially (bottom part of finns) or on both side to protect from coral scratches
@ИгорьИгоревич-е4т
7 жыл бұрын
Hahah, good video! And good channel. See you from Kazakhstan)
@shellm221
4 жыл бұрын
Good video 👍
@mariocarvalho6177
5 жыл бұрын
Great tips!!! Thx!
@roarfiercefemininerisingma9607
3 жыл бұрын
This is great Info. Thank you
@nikedgerated
7 жыл бұрын
These fins are high quality Greek fins, so no matter how hard or stupid you use them, they will not crack or break.
@NautilusSpearfishing
7 жыл бұрын
;)
@djnree
3 жыл бұрын
hi mate, i noticed some white dots (look like clouds)on my c4 carbon blades surface...i dont know why is that happened? i tried to clean but nothing have worked on it :( what should i do ?
@radekzdonczyk4191
3 жыл бұрын
awesome tips. thx.
@tjpereira1564
3 жыл бұрын
What about the fiberglass?? Aren't they more durable??
@BrunoSantos-mt1gn
6 жыл бұрын
Simple like that.. thanks!
@roarfiercefemininerisingma9607
3 жыл бұрын
I’m new to freediving, I was told not to let the fins be dry for too long, that there was an oil you can use on the foot pocket. Is this correct? Do you know what kind of oil if so?
@juantootree6260
5 жыл бұрын
omg you can totally see at 1:12 that he totally broke it. lol.
@NautilusSpearfishing
5 жыл бұрын
Just the glue ;)
@FaddaWolf
6 жыл бұрын
this helped
@nanimamou
5 жыл бұрын
Tq 👍
@ravenclaw9358
3 жыл бұрын
Where to buy those fins
@jacquescharlot
3 жыл бұрын
Does protective film (non transparent ) protect the blade matrix from UV damage?
@maximerayer5841
7 жыл бұрын
do carbon fins crack on rocks? because i am normally shore diving
@NautilusSpearfishing
7 жыл бұрын
They are very tough but would avoid walking over rocks with them... over time can likely be a problem or if a surge catches you and the fins gets stuck in between the rocks can be very bad
@aitorjara100
5 жыл бұрын
Because why not walking around with a $300 carbon fins in the rocks right? R.I.P common sense
@maealvarez5640
4 жыл бұрын
How do i properly store my fins inside the fins bag? Should i put it one side laying down and one side laying up (foot pockets in both ends) ? Or both foot pockets on the same side? Thanks
@NautilusSpearfishing
4 жыл бұрын
lay them flat on the ground ideally pockets one on each side upside down
@judeet2595
4 жыл бұрын
There is a crack along the railings in my carbon blade. Is there anything that can stop the crack from extending? The fin is 6 years old
@NautilusSpearfishing
4 жыл бұрын
6 years is a long time for carbon fins.... Use them until they die, and get yourself a new pair
@judeet2595
4 жыл бұрын
@@NautilusSpearfishing hi,until they die means until the fin spilts? I saw in forums someone's carbon even lasted 10 years.🤔 your video about the brushing motion is helpful so Im gonna do that to prolong the remaining life of the fin...
@NautilusSpearfishing
4 жыл бұрын
@@judeet2595 ;) no worries..... depends how often this person dove, did they only dive open water or rocks??.... many factors. I know some guys who dive 3 times a week and in a year they will need new ones.
@judeet2595
4 жыл бұрын
Thank you for replying! 🥳🥳😬😬
@marioalcedo3709
4 жыл бұрын
What glue do you recommend to be used? the railings of my fins started to separate and I cant find any useful glue to fix it.
@kadebaitrum7797
4 жыл бұрын
loctite or basic cyanoacylate superglue you can aslo get loctite powerflex which is a bit more expensive than regular glue but its rubber infused and its flexible works very well
Пікірлер: 42