- Purchase your tools at www.trutechtools.com/?AffId=42 and use the offer code SURVIVAL to save 8% on your total purchase (exclusions apply) -
@MrJujubean
10 ай бұрын
Some times techs having to be detectives and looking at the big picture we miss things with so much going on with the unit. You do a great job chasing down a problem
@HVACRSurvival
10 ай бұрын
Thank you!
@steve19841117
2 жыл бұрын
semi compressor just last forever. good video Rick
@Georges3DPrinters
Жыл бұрын
3:46 ah the ol' bird nest of wires is always so much fun lol😂
@mainj54
2 жыл бұрын
When you mentioned the building had to be secured it reminded me of when I used to service a high security DOE facility and had to have a escort with me at all times.. It took a act of Congress when I needed to access the roof to check units. Dreaded those calls.
@HVACRSurvival
2 жыл бұрын
It's a school with younger kids so people usually are more worried. Luckily it's a nice town. The worst is when I work at corrections or the jail.
@dirkcanyow
2 жыл бұрын
Great video. I was was howling when you went on your energy efficency rant. Its the way the industry is going hence we will never be out of a job sevice calls galore.
@HVACRSurvival
2 жыл бұрын
Your absolutely right man! I cut down what all I said during editing 🤣. There was more😉
@IWorldLeader
2 жыл бұрын
"Wow somebody was using their Thinker Muscle" lol
@HVACRSurvival
2 жыл бұрын
Hard to believe in a state funded building 😅👍👍
@sterlingarcher46
2 жыл бұрын
What a mess . Really surprised at the state of the evap coil , 28 yo and it looks mint condition, that's amazing. Nice one Rick 👍.
@HVACRSurvival
2 жыл бұрын
The EVAP was really nice looking, I wish I could spend more time and label and convert it to a current refrigerant and replace the valves but no one has time for that🤦🏻🤑.
@dougking7592
2 жыл бұрын
You know I can not figure out why tech’s think you have to rewire or change wires around when there is a part or at the most two or three parts that need to be replaced, I like to find the problem and try changing it to put unit back in service as always explained and great content thanks brother
@HVACRSurvival
2 жыл бұрын
I agree 💯 % with you. Thanks for the feedback!
@MikeB9771
2 жыл бұрын
Good video Rick. If I had to guess you walked a few miles that day. It's hard to diagnose things quickly when it takes that much time to go from one place to another.
@HVACRSurvival
2 жыл бұрын
I got lucky, I was able to get in the front door and right onto the roof. Thanks for watching!
@AngelHVACR
Жыл бұрын
Never comment on your videos man but want to say thank you man you’ve tought me so much over this past year doing refrigeration 👊🏽. Had a similar issue like this today with a defrost termination and was able to get it going
@HVACRSurvival
Жыл бұрын
Awesome! Thanks for letting me know! The comments are the best part for me.
@lerch400block
2 жыл бұрын
Last summer I had a the fan delay blow a hole in one of the loops. On a Saturday at 9pm cause that's how it go.
@HVACRSurvival
2 жыл бұрын
That sounds like my kind of luck🤦🏻👍👍
@Farm_fab
2 жыл бұрын
I haven't met anyone yet that appreciates a rats nest like that. My garage might be a mess, but when it comes to wiring, I want that neat.
@HVACRSurvival
2 жыл бұрын
We were getting hit hard with no heat calls so I was being pushed to hurry up. These last few days have been 9-15*F in the mornings. The 📞☎️ is a ring-ING
@rickmiles2381
2 жыл бұрын
Well done. But is over my head
@HVACRSurvival
2 жыл бұрын
Thanks Rick! It's all good, it's comes with time
@walkingfreak
2 жыл бұрын
Damn you are older than i had originally thought. Always seems like you're opening some kind of pandoras box with these older systems.
@HVACRSurvival
2 жыл бұрын
Thanks Matt 🤣. I share all kinds of information, the guys I worked with ran service up till they were around 59-60yrs old. I have several years to go. I started when I was 19.
@lerch400block
2 жыл бұрын
That's a nice invoice to write up. 😆
@shine-cg9uf
2 жыл бұрын
Wow a lot goin on there. Great video doctor 👍. Thanks for sharing. 💪🐕🇺🇸☕
@HVACRSurvival
2 жыл бұрын
Shine on👍👍. Thanks man!
@tomasnewson6744
2 жыл бұрын
Using the most important refrigeration qualification ‘ Turd polishing ‘
@HVACRSurvival
2 жыл бұрын
Hell yeah 😅👍👍
@Ted_E_Bear
2 жыл бұрын
Great video Rick !
@superhvacthermalmechanical
2 жыл бұрын
good job
@thesilentonevictor
2 жыл бұрын
Great work Rick
@gregbowman3598
2 жыл бұрын
That was a nice one Rick 👍
@mitchell8204
Жыл бұрын
I looked thru your tool list and didn't see that little solenoid tester. Is that just a little compass? Nevermind I looked on one of your older videos I think. Thanks for all the information and tips. Helps a lot with my service tech job.
@HVACRSurvival
Жыл бұрын
Thanks for the feedback. Hopefully I'm helping other Tech's get there faster, that's my motivation.
@joehead1294
2 жыл бұрын
I'd make a snide remark about that fuse but I'm not going to. Your working, I'm just watching.🤐🤣👍
@HVACRSurvival
2 жыл бұрын
I would prefer all new fuses and it probably could have used a 10 amp. I was getting nagged to get done so we could get to all the heat calls coming in.
@HughesManHVAC
2 жыл бұрын
I enjoyed the video Rick. A lot to think about. Nice video!
@HVACRSurvival
2 жыл бұрын
Thanks Ryan!
@andrewmcdonald4519
2 жыл бұрын
Good job
@alyciadh32
2 жыл бұрын
Awesome video!!! Thanks for the in depth approach, super helpful!!
@HVACRSurvival
2 жыл бұрын
Your welcome, thanks for watching it!
@EverythingHVACR
2 жыл бұрын
Great video Rick! It's always fun with old equipment wiring nightmares
@HVACRSurvival
2 жыл бұрын
I was living the dream that day🤣
@qualitybarsolutions6107
2 жыл бұрын
Happy New Year Rick, great vid 👌🏻💪🏻👏🏻👏🏻
@HVACRSurvival
2 жыл бұрын
Thanks my man! You too!
@AVR-hf1rl
2 жыл бұрын
Now I have a headache lol
@lee-johnson
2 жыл бұрын
Where do you find that little magnetic meter that spins? Thanks for the video
@lee-johnson
2 жыл бұрын
@@davejohnsonnola1536 What’s the brand name maybe the model number?
@HVACRSurvival
2 жыл бұрын
amzn.to/32TGXlH this will help support the channel and it's the same price if you purchase it by searching it normally.
@ore-georgecicovic6533
2 жыл бұрын
Rick i know its not related with this video but you mentioned in one of the recent ones for checking Refrigerant level in receiver using thermal camera u worm up receiver. What method u use for doing that. Cheers and thanks again for great video.
@HVACRSurvival
2 жыл бұрын
You can use a heat gun or a hand torch but you have to be careful to not over heat it. You want to heat it just enough to feel the difference where the refrigerant is setting vs just the empty metal at the top of the receiver.
@ore-georgecicovic6533
2 жыл бұрын
Thank you for answering. Cheers
@kevinpoore5626
2 жыл бұрын
Yay I'm number one today I am the champion maybe LOL :-) :-) I would say keep warm but you're in a freezer oh yeah it's not working so you will be war LOL keep up the good work
@HVACRSurvival
2 жыл бұрын
Thanks Kevin👍👍. I'm not on call today so I'll start warm😁, for a day or two😂
@jasonjohnsonHVAC
2 жыл бұрын
Apparently zip ties weren't an option to clean that rat nest up. Always irritates me when i come across wires going everywhere. As for the the rest of that system........my .300 blk out volunteers its services in putting it out of its misery. Another great video Rick
@HVACRSurvival
2 жыл бұрын
🤣 This was at a victim zone. I meant a no gun zone😉. I would be willing to take turns 💥 plinking off controls peace by peace. 👍👍
@jasonjohnsonHVAC
2 жыл бұрын
@@HVACRSurvival you bring the beer ill bring the ammo
@HVACRSurvival
2 жыл бұрын
That's a HELL of a deal. I'll start saving for bail money😂. "Just kidding BIG BROTHER WATCHING!"
@Eddy63
2 жыл бұрын
Good vid and good fix ... Quite a rats nest ... We going live tonight ? Thx ... Hey to Chronic ...
@HVACRSurvival
2 жыл бұрын
Sunday if we do.
@realestateservicessaleshea99
2 жыл бұрын
Pesky little shorts. Thanks again for the videos. 🍺🍺🍺🥃🥃🎯🏌🏻♀️ Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!
@stephwaylonwells3218
2 жыл бұрын
👍
@harrydickson4575
2 жыл бұрын
👍👍👍
@HVACRSurvival
2 жыл бұрын
Hit the LIKE BUTTON UNDER The Video if you're getting something out of these videos👍. 👉 It's a free way to help my channel grow. These might look like it would only take a few minutes to make these.... But they take 4-5 hours of editing, labeling and describing them with searchable keywords, Bla Bla. 👍👍👍👍👍👍👍
@TonyRodriguez-ok2ix
6 ай бұрын
🍿👽🍿
@wildewipper
2 жыл бұрын
How do you call this device on 13:54
@HVACRSurvival
2 жыл бұрын
It picks up the magnetic field of the solenoid. Then it spins.
@davejohnsonnola1536
2 жыл бұрын
Will also tell you the rotation of pump motors
@HVACRSurvival
2 жыл бұрын
From what I seen, depending on where I place it at on a solenoid it can change rotation direction and if a circulator pump is a cartridge type it doesn't work because the it cancels the magnetic flux lines.
@steveblake8766
2 жыл бұрын
228 Thumbs uP
@karaors8970
2 жыл бұрын
👍🇹🇷🤳🛠️🍻
@HVACRSurvival
2 жыл бұрын
What's up Turkey 🦃👍👍. Happy New Year!
@automatictrader7913
11 ай бұрын
dont call us boys and girls
@coldfinger459sub0
2 жыл бұрын
That wiring mess and all the problems reminds me of HVAC/R school when the instructor would set up the units with dead components and bugs for the students to fix. Three students in a group per unit all trying their method simultaneously wiring different components there is always smoke always a capacitor to explode in a class 208 wired up to 120 all my newbie students. Who would think when you got out into the real world that installed units are maintenance than throwing together and look just like student trainers units lol 😂
@HVACRSurvival
2 жыл бұрын
Some people just don't take pride in their work. It only takes a few extra seconds to make something look awesome 🤷
Пікірлер: 79