Had to do the same thing on my Polaris Ranger. I was shocked by how many bushings there were on it front and rear. But, boy what a difference it made. Good video.
@wmsterlingwright
2 жыл бұрын
Thank you for this video. I have a 2014 CC carryall2 I use almost every day and I have been needing to do this for a while now.
@TheRustyRooster
2 жыл бұрын
Another great job... you the man constantly pumping that content out 🐓👍
@KA-sk6pw
5 ай бұрын
Thanks, great video and to the point !! Waiting for my bushings to come in tomorrow and will be doing the back and front on my 2009 club car carryall 252. Mine are just like yours were....metal on metal, no bushings left. the one for the engine , that they call a Snubber, to help for the vibration , was not even there, so ordered one of those also.
@hickorystx
2 жыл бұрын
Very informative tutorial. Thanks for a job well done!!! 🏆
@johnmartin431
Жыл бұрын
Exactly the video I needed. Great job.
@tinkeringtaylor3053
2 жыл бұрын
wow would have thought customer would have been in quick with that but you done a good fix
@Bodic411
Жыл бұрын
Great video. It will help me on mine. Thanks alot. I might be reaching out for more help. 👍🏾👍🏾
@adnacraigo6590
2 жыл бұрын
Never worked on those but that knowledge might come in handy.
@chadlambert3186
2 жыл бұрын
Thanks for the help
@user-nh9vs9jw8f
3 ай бұрын
I bought a 2018 club car President the front has a 3.5” or 4” left all bushing are good put a different left spring on and can’t wheels flat on ground. Not happy with this suspension Has 12” new tires.
@tonym6920
2 жыл бұрын
Loose as a goose!👍👍
@nashguy207
2 жыл бұрын
That front end was warn out. lol
@bjbrunetti
Жыл бұрын
Nice video. Coils or leaf springs better?
@markcaldwell3978
2 жыл бұрын
Put a'lil grease in it! It'll be alright!🤣🤣🤣
@davidmccormick9022
2 жыл бұрын
Thanks!
@billlovett4256
2 жыл бұрын
Do you like Stens belts since they have move manufacturing to India?
@rickbroerman9267
2 жыл бұрын
Nice easy fix
@TheRustyRooster
2 жыл бұрын
Hey Rick I never got an email from ya, I need an address to send you a sticker
@hphillips7425
2 жыл бұрын
Will it help any to put some grease on the inside of the bushings where it contacts the sleeves?
@THEMOWERMEDIC1
2 жыл бұрын
Grease will deteriorate the rubber
@billlovett4256
2 жыл бұрын
Cool repair video, is club car easy to look up for IPLs?. P.S. I love Stens for some stuff.
@THEMOWERMEDIC1
2 жыл бұрын
Very easy
@Mike-pv6et
Жыл бұрын
Thanks for sharing. Did the arm need replacing or was changing out the bushings enough?
@gopackgo69
10 ай бұрын
He mentioned that the cost was the same basically from buying a new a arm assembly or bushing kit. He went with the a arm assembly because the work is done and it looks better. Either way it looks good.
@jws3925
Жыл бұрын
Do you recommend just replacing the entire A arm rather than replacing he bushings in the old one. Why?
@sandman6849
2 жыл бұрын
In the Nuke navy we called using the purcusive device "mechanical agitation". 😉
@donaldberry4412
2 жыл бұрын
My CC has a rough ride and my tires are original (20 yrs old) would new tires make a lot of difference in the ride??
@THEMOWERMEDIC1
2 жыл бұрын
Probably need a new shocks
@alligatorwithwifi6111
5 ай бұрын
Will this be the same on the electric version? My grandpa is 73 and thinks it's ruined forever and I know nothing about them but wanna try and fix it for him
@THEMOWERMEDIC1
4 ай бұрын
Absolutely
@97warlock
Жыл бұрын
what if I reset the camber AND the toe-in correctly & drive it a minute then its off again, way off is it possible front bushings could make it THAT unstable?
@THEMOWERMEDIC1
Жыл бұрын
Absolutely
@Movinthroughtheworld
Жыл бұрын
thanks
@jamesmiller384
2 жыл бұрын
Any worry about correct torque settings?
@THEMOWERMEDIC1
2 жыл бұрын
I use the German torque spec gutentite
@turckskidoo
2 жыл бұрын
Then take her in for a alignment lol
@harryvelez489
Жыл бұрын
Thank you for your video for very informative but above the Boston instead of the whole arm and then send me the silicone bushing what a pain in the ass to put them on next time I take your advice by the arm with the bushing I would have been done long time ago my job be finished tomorrow I give up today
@ncrdisabled
2 жыл бұрын
is your shop near another shop i hear air tools in the background .
@THEMOWERMEDIC1
2 жыл бұрын
Our shop is huuuuuuge. We work on everything from weed eaters to heavy equipment
@garyboulais8487
Жыл бұрын
How to change hub bushings
@darinbarfield8738
Жыл бұрын
Why not just replace the bushings? Instead of replacing the entire arm??
Пікірлер: 43