Good commentary. Thanks for the tip about cleaning it up with acetone. The door is today’s project.
@davgar09
2 ай бұрын
Nice work! I’m getting ready to start my door this weekend. This helps a lot, thanks!
@DIYeasycrafts
2 ай бұрын
Glad I could help!
@boogie1014
2 жыл бұрын
Perfect. What about adding some kick plates to the bottom.
@julieragwen9465
Ай бұрын
We followed your door make over and just redid our fiberglass door using the same process and same paint. We put 2 coats of paint and one day later there are bubbled up parts on the door. What would you advise we do to remedy this. Thanks. We allowed one day for the first coat to dry
@shelbychilingirian1479
Жыл бұрын
Can I 🎨 my 🚪.into my new house ?
@markharding6582
3 ай бұрын
That looks great. I have to do the same to my fiber door. I really liked that color you selected too.
@DIYeasycrafts
3 ай бұрын
Thanks so much!
@FundamentalJiujitsu
2 жыл бұрын
Hey Dan, I emailed your knife making page with a question and have not gotten a response yet. Is there a better way to get in touch with you? Thanks so much!
@DIYeasycrafts
2 жыл бұрын
Not sure why I did not get it. I was on family vacation a couple wks ago but still should have received forwarded emails. Anyway what can I help you with? or email me direct wreckvalle@aol.com
@pamelariegel6274
Жыл бұрын
The doors turned out really nice. I have a fiberglass front door I have to paint and I will follow your style.
@richardbesley9683
4 ай бұрын
Thank you I'm getting ready to paint my door
@janebarrow6280
Жыл бұрын
I need to repaint a front door on rental property. This was very helpful including that I was concerned a standard brown was not going to look nice but yours shows that it looks very nice! could you share the color?? was it a standard pre-mix? (save a little money) or custom?
@DIYeasycrafts
Жыл бұрын
Im so sorry but I do nit remember the exact color and cant find the left over can. I had the paint mixed at home depot. Just got lucky picking a nice dark brown that my wife ended up liking!
@donaldpullen8683
Жыл бұрын
Great job, you definitely helped me save some money re-doing my front door.
@DIYeasycrafts
Жыл бұрын
Glad I could help
@TADDs101
Жыл бұрын
That looks AMAZING! i am getting ready to tackle our front fiberglass entry door .. i actually had a contractor paint it about 6yrs ago but now the paint is starting to peel etc and looks bad So, what is my best way to get all the loose paint off before sanding? Thanks for this video, a great help
@islandbreezy441
Жыл бұрын
Strip it with citristrip. Don't leave it on long. Between 10-15 mins. When i think fiberglass I think autopaint and topcoat. I've seen other use gel varnish on these doors with success too. I would still put a topcoat on ( shiny or matte).
@paulmartin6506
11 ай бұрын
Thanks for the tips. Going to try to give our poor performing door an update.
@DIYeasycrafts
11 ай бұрын
You can do it!
@deborahplaia4294
Жыл бұрын
Beautiful! Great job!
@DIYeasycrafts
Жыл бұрын
Thank you! Cheers!
@jkharnagel
7 ай бұрын
Was your door painted to begin with or was it gel stain before you added the new paint? Also, you used acetone but others say to use denatured alcohol, why the difference? Is one better for a painted surface? My door is fiberglass with an oil based gel stain on it and it needs refinishing. Thanks
@nellhenderson1207
5 ай бұрын
Hi you did an amazing job on your doors they look beautiful the reason I am watching is because I purchased a door from Home Depot and has the the oval glass in the middle and it also has a lot of stains because I am suppose to paint it but I do not know what paint to purchase the door is white but its not a wood door help me please I wish I could take video and send it to you
@krishnadesai
3 ай бұрын
Would you mind commenting on the specific bondo fiberglass product you used? Thanks!
@DIYeasycrafts
3 ай бұрын
Its called. Bondo Glass Short Strand Reinforced Fiberglass Filler,Stage 2, 2.56 Oz Filler and 1 Oz Cream Hardener You can find it on amazon
@krishnadesai
3 ай бұрын
@@DIYeasycrafts thank you!
@StupidRalph
Жыл бұрын
Great Job. I want to try and go in with a gel stain to preserve just a little more of that texture but if not im going to go acrylic as well.
@erinreichert4430
11 ай бұрын
Could you please post the exact bondo fiberglass you used in the description please? I have the very same issue with my double front doors! Changing out the hardware and need to fill in the little hole at the bottom.
@DIYeasycrafts
11 ай бұрын
Bondo Fiberglass Resin Jelly, 00432, 1 Quart
@erinreichert4430
11 ай бұрын
@@DIYeasycrafts thank you so much!!!!!
@naydacruzharris4623
Жыл бұрын
We have a moon shaped crack on the exterior of our Pella door; it is about four inches wide. Our door has a wood grain. In your opinion, can this be repaired using your technique? Will the Bondo give me enough time to try to tool the wood grain? Thank you for your help.
@DIYeasycrafts
Жыл бұрын
You did not say how long the crack was. Regardless even if crack is 12 inches long bondo should work. Just work fast to get the wood grain. Worst case sand it off and apply grain with 2nd coat. Best of luck!
@naydacruzharris4623
Жыл бұрын
@@DIYeasycrafts Thank you for your response. I will definitely do this once the weather warms up It beats replacing the door, which as you know, is a very expensive proposition. God bless.
@naydacruzharris4623
Жыл бұрын
@@DIYeasycrafts The crack is also about four inches long. One last question…which Bondo product did you use? The kit I was looking at seems to be in liquid form. Thank you once again.
@shelbychilingirian1479
Жыл бұрын
Fiberglass 🪟
@sanjivpatel6866
Жыл бұрын
Do you know what color have you added? I have same color and problem
@DIYeasycrafts
Жыл бұрын
Im sorry but I dont remember. I just picked from the color sheets at home depot
@sanjivpatel6866
Жыл бұрын
@DIYeasycrafts No problem, thanks for the quick update
@jkharnagel
7 ай бұрын
What color paint did you use ?
@DIYeasycrafts
7 ай бұрын
It was color matched at home depot
@agalpalacio9157
Жыл бұрын
i installed a peep hole in my front entry fiberglass door and chipped the surface on the opposite side as i was drilling thru, will this fiberglass bondo work to patch it up?
@kenmartin1048
Жыл бұрын
Yes, it will
@davidburkholder7360
5 ай бұрын
An HVLP sprayer would have been MUCH better and given you a "factory finish." Not to bad for DIY but lacks full pro.
Пікірлер: 48