Only grind off the weld area the holes in the frame will sweat and that area inside will rust..
@anthonyhuffman6732
2 жыл бұрын
Awesome videos just as usual! So thankful for this channel!
@thecadillacdanshow8658
2 жыл бұрын
Thank you there is alot more to come
@tonyrose823
2 жыл бұрын
😂 that easy ,nice 👍 great tips thanks.
@kobz808
2 жыл бұрын
Badass
@thecadillacdanshow8658
2 жыл бұрын
Thanks! If you like this you will love the up coming videos!
@214mannygarza
Жыл бұрын
Do you have any video of you doing the towers
@thecadillacdanshow8658
Жыл бұрын
Are you talking about the ears for the a arm if so I will be putting one up soon
@cjoe6586
Жыл бұрын
Question, do I have to diss connect the main battery when welding also do I have to disconnect anything other than my quick disconnect to the hydraulics???
@thecadillacdanshow8658
Жыл бұрын
It is recommended to disconnect it but I have also run a exhaust shop and we never disconnected a battery
@anthonymaestas4863
2 жыл бұрын
If it took you an hour and you have done it before. For me, I am thinking a day to disassemble. A day for the template and pattern. A day to weld and a day to reassemble. So maybe three weekends. Lol
@thecadillacdanshow8658
2 жыл бұрын
Oh yeah it was just a hour bending the metal and welding it I wish I could do a tear down and cut templates and weld it in that fast thay would be nice
@LB7Amoney
7 ай бұрын
What kind of welder are you using like size? Stick or mig
@thecadillacdanshow8658
7 ай бұрын
I use a miller 212 mig with .035 wire
@22flyeaglesfly
2 жыл бұрын
Do you have a video of taking the chrome trims off. I see a lot of people asking about how to do it.
@thecadillacdanshow8658
2 жыл бұрын
I need to edit it. It's on the list
@214mannygarza
Жыл бұрын
What size mig wire you recommend
@thecadillacdanshow8658
Жыл бұрын
I normally use .035 but if to do thinner metal work also .030 is kind if the best if both worlds
@memphosfinest
2 жыл бұрын
What’s the ball park price for the front and back reinforcement? Work looks good 👍
@thecadillacdanshow8658
2 жыл бұрын
With the price of steel right now around 1800 front and rear for partial reinforcements
@wsh81
2 жыл бұрын
Nice welds
@thecadillacdanshow8658
2 жыл бұрын
Thanks I have good ones and sometimes bad ones the bad ones get ground out and tried again
@camefromnuthin6994
2 жыл бұрын
Hey good brother I have another question I’m putting a piston pump in is it a 1/2 NPTx 3/8 female 90 swivel I have 3/8 fittings on my old pump what fittings do I need to put it together is it 1/2 and 3/8 or all 1/2 for piston pumps
@thecadillacdanshow8658
2 жыл бұрын
I would do all 1/2 inch
@kobra_style
2 жыл бұрын
If I just want to do lay and play on my 61 impala convertible what parts should I wrap? The wheels will never leave the ground (won't have much power and only 2 dumpks total so can't 3 wheel). Can I get away with just reinforcing the spring pockets? I want to keep as much of the OG vert frame look as possible, but if it needs more reinforcement I am willing to do so to not ruin my car.
@thecadillacdanshow8658
2 жыл бұрын
Honestly with a convertible I would do as much reinforcements as possible i have only delt with a few convertibles and I am always very suprised how week they are you can lift the car with a jack and watch body gaps change. Not to mention the value of convertibles it's a good investment to keep that value
@kobra_style
2 жыл бұрын
@@thecadillacdanshow8658 Ok I will have it fully wrapped then! I was originally going to do that, but then I was told I didn't need to for what I was doing. I think I rather be safe than sorry.
@thecadillacdanshow8658
2 жыл бұрын
@@kobra_style exactly it's way better in the long run keep your car nice
@camefromnuthin6994
2 жыл бұрын
Gm broi got a question I have a 1995 Lincoln town car I replaced my upper control arm bushings and they not going in the way the came out would I have to Bend them back it look lik since they was real bad they bent it of so they don’t line up
@thecadillacdanshow8658
2 жыл бұрын
The arm may be bent I cant remember if that year had dog bones or not if it does that may be bent also make sure your bushing pressed in square that could make things not line up sometimes it helps to freeze the bushings it will shrink them
@camefromnuthin6994
2 жыл бұрын
@@thecadillacdanshow8658 ok yea it does so I can I just bend it back to fit
@thecadillacdanshow8658
2 жыл бұрын
@@camefromnuthin6994 talking about the dog bone right? I would try to replace it if possible
@camefromnuthin6994
2 жыл бұрын
@@thecadillacdanshow8658 what’s the dog bone the a arm
@thecadillacdanshow8658
2 жыл бұрын
@@camefromnuthin6994 the crossbar where you bolt the arm to the frame
Пікірлер: 40