You’re video was a great help. Thank you very much.
@AngryHalfbreed72
7 жыл бұрын
Hafa Adai all the way from Washington DC!!! Thanks Fam
@FixItAngel
7 жыл бұрын
Hafa Adai!! Thanks for watching. I'm from Yigo. Where you from? LOL
@Shododaan
6 жыл бұрын
Great video... sweet spring compressor you have there =) Thanks this will help me a lot great work!
@nicholasgetty70
7 жыл бұрын
Hafa Adai, thanks brother. this helped out a lot for my titan
@Rizwanshaikh-sj9ho
6 жыл бұрын
Bro I need warak I have isprens 8 years me Warking naw in Qatar Ac Tire macknec my no 0097430404738 my nem Rizwan form india
@juanrrobledo89
2 жыл бұрын
Nice job 👍 I may need to do mine, I lack the strut machine
@tisoy909
6 жыл бұрын
Thank you Bruddah! Time to swap da shocks. I noticed doesn't need to compress too much either huh.
@ivanvega2821
6 ай бұрын
Great video! After front struts, is it ideal to have your vehicle aligned?
@rehanasadique
6 жыл бұрын
haa... i have to change the same on my armada... wish i was a having all these tools
@tommyv22222
5 жыл бұрын
Does this Armada have the rear leveling system and if not do you happen to know the part number for the strut for a 2005 Nissan Armada LE 4 wheel drive with tow package and rear leveling shocks
@charlsseal7273
8 жыл бұрын
Thanks angel for another great video. Waiting for the A-hole to wake up. Lol
@FixItAngel
8 жыл бұрын
LOL
@jirojosephesman8175
8 жыл бұрын
thx for a great video...always..
@db4652
7 жыл бұрын
Gracias muy buenos tus videos pero deberías de hablar explicar las cosas GRACIAS 👍
@7volcast
8 жыл бұрын
great video!
@junaidvp3296
6 жыл бұрын
Hbmc suspension how to replace pls upload one video
@efgieflorendo755
4 жыл бұрын
Hope you can help me, I have Armada 2006, my mechanic replaced the lower and upper arm on both sides, after the replacement the VDC OFF/SLIP/ABS came out. All fluids are ok, but the issue are, after I start to move the car all 3 lights will be off and when I pressed the brakes, i felt like there is some actuating going on with the ABS like a grinding and ticking sound, after a few meters of driving the lights will come back again and the grinding and ticking sound will be gone, but I think the ABS is not working because I tried to make a sudden stop and braking while turning and I didn't feel the ABS. After that the 4WD light will appear. Hope you can give me an idea whats going on, thanks Kabayan!
@alexandergradle1623
4 жыл бұрын
There's a wire coming off the hub that routes itself up and through to the inner wheel well. Check to make sure its not broken and that its connected. If it is broken you will need a new abs sensor. They are cheap and easy to change. Or alternatively find a place that can read the ABS module codes, and see what it says. A bad abs sensor will trip all 3 lights. Had a bad abs sensor on an 06 QX56 and the same thing that you described was happening.
@akarjoo
5 жыл бұрын
Can you show how to replace the rear air shock compressor?
@edwardlozada6249
2 жыл бұрын
What’s up braddah how much you would charge 4 charging a blend door actuator on top inside the dash?🤙🏾
@Hung-Phan
5 жыл бұрын
love it
@burtonmaina
5 жыл бұрын
Thanks for the video. I'ave replaced mine several times and each time I've been able to replace without dropping the sway bar. Wondering how the Gabriel Ultras are fairing though.
@TheTurboSmart
8 жыл бұрын
Hey Angel i appreciate you going the extra mile and washing the cars after ur work. Is it better to wash the engine when its hot or cold? How do you do it?
@FixItAngel
8 жыл бұрын
Hi TheTurboSmart, Thank you. I just leave the car running. I don't put any degreaser on the engine. I just use a pressure washer. I try not to stay too long on the ignition system area like the spark plugs and wires. Also I don't spray at the drive belt areas well as the alternator. Thanks for asking. Have nice day.
@cruisingthethaiway6881
6 жыл бұрын
Purple Power and garden hose once a year. It's OK to do the belt and alternator. Do it on a cold engine. Wash everything twice. Avoid using a pressure washer do to it can get water in the connection that have seals that will not withstand a pressure washer. It can lead to drivability problems, set codes...
@baltachaidez1410
6 жыл бұрын
Hi how long til the springs went back to normal weight
@jirojosephesman8175
8 жыл бұрын
do you have any video on changing ball joint on corolla03' -08' thx God bless
@FixItAngel
8 жыл бұрын
Sorry I don't have yet.
@camrok937
7 жыл бұрын
is it normal to just change the strut or how would i know to change both strut and coil spring? My 06 armada on the highway seems to bounce left to right over any kind of bumps
@jirojosephesman8175
8 жыл бұрын
with the corolla shocks and struts any will do or I need to get OEM thx
@FixItAngel
8 жыл бұрын
Hi jirojoseph, I recommend going to your local auto store. They should have warranty on struts and shocks. You don't have to buy OEM. It is very expensive.
@Blessed2BeAKing
7 жыл бұрын
Did you have any problems with your breaks
@davidderfus3462
7 жыл бұрын
I have an 06 Armada, and I didn't have to drop the sway bar, but some people do drop it. I was wondering why, when you don't Dave to ? ? ?
@FixItAngel
7 жыл бұрын
David Derfus everybody has their way of doing things. As long you get the job done. I do what's comfortable for me, though it might take longer. It's just removing stuff and putting it back. Not a big thing. Have a nice day.
@davidderfus3462
7 жыл бұрын
Fix It Angel I guess what I was asking was, are there some models that require you to drop it and some that don't because you are not the only one that drops it.
@bobm3957
7 жыл бұрын
I have an 08 Titan which is on the same frame as the Armada and ABSOLUTELY had NO choice but to drop that bar. In other vids they don't touch it....others they take even more parts off. On my truck that link is right in the way. Glad I found this because I wasn't sure which was the easiest way..... THANKS !
@faiyaha6869
5 жыл бұрын
Where are you located? Can you help me with mine. 🤙🏽
@MMM-zu9tf
5 жыл бұрын
👍👍👍👏👏👏
@MrFz1000
3 жыл бұрын
That's a 2wd different for 4wd
@svrblk777
3 жыл бұрын
Great detailed video, what brand do you suggest for the struts and shocks, a direct OEM alternative parts? Thanks!
@svrblk777
3 жыл бұрын
Do you need to replace the bushing? how many bushings are there per strut?
@rchefman2266
4 жыл бұрын
What is that tool your using to push down the spring in the shop?
@tgoodm1
7 жыл бұрын
I am looking to replace my front struts/shocks and my lower ball joints on my 2005 G35 Sedan. Dealer parts too high for my budget. Can you recommend another brand that won't compromise ride quality? Thanks!!! I am enjoying your videos.
Пікірлер: 49