My late grandma told me if your not going to be rich enough to pay someone to do it then you will have to learn how to do it. I learned a lot using that mindset. Seems like you also have
@lifeleaves1268
3 жыл бұрын
Same here. My grandma never lived to tell me. I just learned that the hard way.
@obetcorea9985
3 ай бұрын
Great advise
@peanbean1973
10 ай бұрын
Thank you so much sir. You not only showed me so much but your words and soul you shared will be appreciated. Me and my buddies are really excited about our truck we're just trying to make it work
@jyll.7132
2 жыл бұрын
This information is so valuable. I really appreciate this. It's gonna help me get my dreams.
@TheSeamster
Жыл бұрын
Very Good and more videos are up :)
@TheRealGrumpyFinn
Жыл бұрын
Best FRP “how to” video I’ve seen, by far, and I’ve seen many. Great job, excellent and clear detail. Thanks for posting!
@TheSeamster
Жыл бұрын
Thanks and some people don’t like me explaining it in detail so much.
@outbackandyfoster7040
2 жыл бұрын
I cut all my FRP by clamping some flat bar down run my knife along 4 to 5 times putting a little pressure while cutting into the back side of the FRP then put pressure working it up and down a few times until it breaks away use a flat file to smooth off any sharp edges the install my FRP
@She_sSincere
Жыл бұрын
Thanks
@gabymorales1861
3 жыл бұрын
Renovating my dog grooming van and this is the best video I’ve found regarding FRP
@TheSeamster
3 жыл бұрын
Thanks
@amughe3323
4 жыл бұрын
I was looking for "how to build your own food truck " after finding out that a new one is super expensive so I stumbled upon this channel and am so grateful sir. It's all I need to start up. Bless you
@TheSeamster
4 жыл бұрын
Amuge Hellen Grace Yes you can do it. Start making phone calls and look and fb market place for a used truck. The SEAMSTER
@amughe3323
4 жыл бұрын
@@TheSeamster thank you so much. I sure will because I so much need it. Love from Uganda east Africa
@togle184
Ай бұрын
Great videos! Good photography, audio, and composition.
@richardpendleton440
Жыл бұрын
Thanks for all the information. Keep up the gate work
@TheSeamster
Жыл бұрын
Thanks and new videos up for you :)
@davidalessandro1474
2 жыл бұрын
Nice tutorial/inspiration Video. I'm about to do FRP in my new Gym's bathroom and this us by far the best FRP video I have seen yet. Thanks for the help.
@davidalessandro1474
2 жыл бұрын
Watched it through! So many hacks!!!
@MsShaylover
Жыл бұрын
3 years later I'm glad I found your channel
@TheSeamster
Жыл бұрын
Right On! Thanks
@obetcorea9985
3 ай бұрын
I started watching your videos on how to build a food truck. You do a good job sir!
@RobbyJarrell-mi6cv
3 ай бұрын
Thank you I’m doing a shaved Ice trailer and gonna use FRP I learned so much watching you I’m gonna save money and make money doing this!!
@skimo8582
4 ай бұрын
Great tips thank you. Never installed FRP before.
@daytriker
3 жыл бұрын
What a great contribution you are making ,teaching people to become self sufficient! Thank you for your videos, I am learning a lot while I build my RV trailer.
@TheSeamster
Жыл бұрын
How did it go for you?
@daytriker
Жыл бұрын
@@TheSeamster I ended up using a material called Ultrabond so it eliminated a lot of sanding & filling while still staying light. Since mine is for Summer use only, I think it is quite suitable but not solid enough for year round use.
@TheSeamster
Жыл бұрын
Very Good and don’t stop.
@kendellellerbe6646
2 жыл бұрын
Love your videos cause you get straight to business. A lot of these guys talk to much about nothing
@TheSeamster
Жыл бұрын
Thanks and hope it works for you
@IamTiffanyEvans
4 жыл бұрын
Thank you for sharing! I love the all white over the stainless steel look. It looks cleaner.
@TheSeamster
4 жыл бұрын
I do agree. The stainless steel does pull light and does not reflect like the bright white FRP. Much cleaner look to it :)
@melissabibb7100
2 жыл бұрын
I've watched several of your videos, but I NEEDED this video today. I just installed my first window and will attempt the second this weekend. FRP coming up soon. It feels pretty overwhelming so THANK YOU FOR THE PEP TALK!
@TheSeamster
Жыл бұрын
Awesome and I have new videos up for you now :)
@anorawalker441
3 жыл бұрын
Thanks so much for this series. I've wanted a food truck since I became a chef and I'm closer than I've ever been and it will all be paid for without loans.
@TheSeamster
3 жыл бұрын
You can do it and more to come.
@irenesanders6186
2 жыл бұрын
You're definitely making my dream come true. Bless you 🙏 ♥
@TheSeamster
Жыл бұрын
Keep on pushing and get it done!
@RichardGarcia-gs6zc
4 жыл бұрын
Best lineup of “how to” videos on food trucks on all of youtube!!! Im planning on starting to build a food truck by this time next year!
@TheSeamster
4 жыл бұрын
My friend this is great news. If I could make a suggestion now for you. Please get started on your application to build. This will take a few months to get approved. Most people just start build and don't get approval to build and then fail their 1st inspection. Start Drawing up your design and come up with a solid line up of foods to serve that will make easy fast $$$. Stay tuned for more great videos to come!
@anthonytaylor1439
3 жыл бұрын
Oh Mate !! Loved all the food truck videos, gonna be a big help, I’m just starting a food trailer in London, great energy!!! Very positive!! Many Thanks 🙏 Spud
@TheSeamster
3 жыл бұрын
Hello to London! The SEAMSTER
@luisaviles802
4 жыл бұрын
I got an smoker built and I really want to do a food trailer... you’re a great mentor thanks man
@TheSeamster
4 жыл бұрын
My Friend, the longer you wait, the more someone else takes your idea and does it. Trust me, easy money and fun, if it's the right foods!!! Start buying things slowly now.
@Kledaras1
3 жыл бұрын
I'm in Delaware. Just bought a flat 20' car hauler, new. Going to extend the width (3') and add 6' to the end. My project....to build a 10'x26' BBQ kitchen. Good luck with your project! The sooner the better.
@Jobrak83
4 жыл бұрын
Sir, thank you for all your tips and tricks. It helped me insanely! Especially the angle grinder, by the end of the day i was a pro.
@TheSeamster
4 жыл бұрын
Joseph Karohl This is great to know. I will have more videos very soon. The SEAMSTER
@alohachristine
2 жыл бұрын
I'm doing my basement shower tomorrow. I really appreciate this. I wish the panels were still only $25 a piece! haha! #pandemicprices! :P I paid $36+tax (per sheet). I got a 2-3 gallon bucket of glue for $22. However, the man helping me at Lowes did tiling for about 30 years and said that the liquid nails will eventually show through the FRP (maybe the PH level or something). Have you seen that happen yet? Well anyhow, I love what you've done here. Thank you so much for blessing so many people with the effort. God bless, Christine
@TheSeamster
Жыл бұрын
Nope it still looks like new and good job :)
@alohachristine
Жыл бұрын
@@TheSeamster thank you. :)
@ramiro4004
4 жыл бұрын
Thank you very much mi Amigo. I'am about to start my concession trailer and I have learn a lot by watching your KZitem videos. I'am sure I will have a few questions as I work on my trailer. Great job!!
@TheSeamster
4 жыл бұрын
Ray Thank You my friend for the great comment. Stay tuned for much more to come soon. The SEAMSTER
@nateteahan
4 жыл бұрын
Thank you so much for these videos. My buddy and I are fixing up an old camper trailer and your videos are lifesaving! We are currently placing the FRP on the walls, and you make it look so easy man haha
@TheSeamster
4 жыл бұрын
Nate Teahan Right On Nate! I will have more videos very soon. The SEAMSTER
@sayedbalkhi5780
6 ай бұрын
Dude you are awesome. I just bought a food truck gave it to a guy who does Venthood and it needed some extra work he charged me 10k and didn’t finished the job . I didn’t want to fight it wasn’t worth it so I let it go
@laithhassan1479
3 жыл бұрын
I've been searching for some instruction on installing FRP boards and specifically how to handle the different types of trim (end, inside corner, outside corner, etc..). I'm working on a bar not a food truck, but this was the most helpful video I found so far on installing FRP and dealing with the corners. Thank you!
@TheSeamster
Жыл бұрын
How did it go for you?
@Chef_Money
9 ай бұрын
Great approach to getting the job done. Thanks for spreading your knowledge. You've helped a lot of people. Me especially. Cheers brother.
@adayinthelife8646
2 жыл бұрын
I appreciate you man giving us the down low. been wanting to do a food truck trailer for the longest time without knowledge it's kind of hard I recently came to the conclusion that I can sub some of the workout that I'm not able to do. you're awesome thank you!
@TheSeamster
Жыл бұрын
Word Up! Thanks
@gregorytolkachev4314
4 жыл бұрын
You are the best , men with gold hands
@TheSeamster
4 жыл бұрын
These hands are getting very tired lately! Thanks The SEAMSTER
@FamilyChannelfun32
3 жыл бұрын
Love your energy man. Its comforting. Truly. I am following your videos and using alot of same stuff!
@TheSeamster
3 жыл бұрын
Thanks It is hard to work and build house same time.
@tashathompson6035
28 күн бұрын
this is pure amazing! Thank you for sharing!
@jasonsmith-ok2jg
Жыл бұрын
Great video, thank you for sharing!
@TheSeamster
Жыл бұрын
Thanks and you can do it!
@SlackerCast
Жыл бұрын
Love the longer form content my dood
@nanughbushiness7134
4 жыл бұрын
We have since finished our truck while awaiting your videos to be posted but we really only needed to know the information from the first few videos. Look forward to more videos.
@TheSeamster
4 жыл бұрын
This is great news. I and others would like to see a finished product of the truck. Can you please post a video of it on your youtube? Thanks for the comment my friend and stay tuned for much more videos to come!
@mareeahdolar8900
Жыл бұрын
Thank you for your very detailed and informative video. 🙌🏽 You’ve given me courage to retrofit my own trailer myself. I just need the most simplest food trailer so I may be able to do this. 🤞🏼
@TheSeamster
Жыл бұрын
Great and I have new videos up now :)
@IamTiffanyEvans
4 жыл бұрын
The truck looks great and your almost there! 🤗 hope you continue to show us the business side as well!
@TheSeamster
4 жыл бұрын
Yes, I will continue to make videos on Food Truck Experiences. Thanks for the comment and keep them coming :)
@wild-radio7373
2 жыл бұрын
#proTip on the small piece of corner trim In your pocket!🔥🥰👍
@LoneCrowAdventures
Жыл бұрын
I think you saved my life. N95 will be worn after seeing that xray!
@TheSeamster
Жыл бұрын
That dust is dangerous!
@peterbeckford8551
3 жыл бұрын
What's up brother, great job I get a lot of info from your work,I got me a truck and I am planning to turn it in a food truck and I don't have a lot of money to do it so I will try the cheapest way but looking great, thanks I'll keep on watching.
@TheSeamster
Жыл бұрын
How did it go?
@Itdontmatter69
3 жыл бұрын
Excellent video
@TheSeamster
3 жыл бұрын
Thanks Again!
@blackfirst1691
2 жыл бұрын
love your channel dude!
@TheSeamster
Жыл бұрын
Hope you get ur done
@blackfirst1691
Жыл бұрын
@@TheSeamster working on it, thanks.
@urbanhomesteadingchannel1813
Жыл бұрын
Thank you for your insights. I'm searching for a truck or bus to convert for my hot dog business. My husband is just like you....jack of all trades and master of most. I've been on Facebook and found a couple of options. But I didn't feel they were the right one. I'm still looking. Never giving up! I have subscribed to your channel and look forward to watching it grow 💚
@TheSeamster
Жыл бұрын
Very good! Yes marketplace is the best option. My opinion but stay away from diesel unless he can fix injectors when they clog up. I had to drive 4 hours to buy our truck and was worth it. Good Luck and get to it!
@urbanhomesteadingchannel1813
Жыл бұрын
@@TheSeamster 💚🙂
@angelabowen1216
3 жыл бұрын
Thank you so much for the video. Going this way will save me a lot of money.
@orvid909
4 жыл бұрын
Good work! Can’t wait to see more and more videos
@TheSeamster
4 жыл бұрын
Yes there will be much more to come. Thanks for the comment my friend.
@johnsandlinjr
3 жыл бұрын
You may have said it in the video, but they do sell frp glue you put on with a notched trowel. That way takes longer. But you’ll get better adhesion. Your final product does look good though.
@TheSeamster
Жыл бұрын
Thanks and it’s still holding strong.
@hype-girl-graphics5229
4 жыл бұрын
Very informative & fun! I look forward to the next one!
@TheSeamster
4 жыл бұрын
Thank You and Look Forward to seeing your videos coming out soon!
@candybar1069
4 жыл бұрын
Hype girl videos? What? Waiting...
@williammclaren7251
Жыл бұрын
I just subscribed to your channel. My dream is to have a food truck. I am doing research now. Thanks for the videos
@TheSeamster
Жыл бұрын
You can do it. Get the truck and get movin!
@zach914v8
4 жыл бұрын
I found your channel because I wanted to see how to work with frp in my automotive repair shop. I subscribed because I like how you explain everything and you have a great positive attitude. I am sure this channel is going to get big! Best of luck to you and I will be watching.
@TheSeamster
4 жыл бұрын
Ball Zach Thank You my friend for the great comment. The SEAMSTER
@bjenkins803
Жыл бұрын
You can use electric metal cutting sheers to cut frp panels. Works great and no dust.
@luisaviles802
4 жыл бұрын
Hi thanks I was waiting for number five 👍
@TheSeamster
4 жыл бұрын
Gracias mi amigo, Part 6 is being made :)
@lonzosanders9428
3 жыл бұрын
This is phenomenal!!! I definitely enjoyed and subscribed!
@vannerdherd
4 жыл бұрын
Looks great! You have skills sir! Your motivational go get it attitude is superior! Can't wait to watch the next part...hope you are safe from viruses and dams! Cheers! 🍻
@TheSeamster
4 жыл бұрын
Thanks and times have been very interesting indeed. The SEAMSTER
@Scrambler85
4 жыл бұрын
Excellent information and a thumbs up 👍
@TheSeamster
4 жыл бұрын
Thanks 👍The SEAMSTER
@ShakespeareCafe
4 жыл бұрын
May I offer a couple of safety tips: Do not take the guard off the grinder. That disk is spinning at 10,000 + rpm. If the disk disintegrates it's going to shoot debris any which way, including into you, with the guard in place it will direct it away from you, provided you keep the spinning direction always away from your body. Also, the centripetal force (centrifugal, common parlance) can cause the tool to swing into your arm if not held firmly. The guard doesn't interfere with any work you're doing so keep it on. Some of the nastiest and deadliest accidents are caused by the grinder. A full face shield with safety glasses underneath is the only safe way to operate a grinder. Also, your table saw blade is too high, you should set it so it only just passes through the FRB. It's a much safer set-up...best regards
@TheSeamster
4 жыл бұрын
Yes, everything you state is very true. The hand grinder is dangerous as soon as it is turned on. When cutting FRP on a table saw, if the blade is low, the FRP will move easily and cuts will not be straight. Leaving the Blade up high acts as a wall to prevent movement as a guide. But if anyone was going to do this job professionally, they would have the proper tools to cut FRP. Thanks for the safety comment. THE SEAMSTER
@fuadodeh6369
4 жыл бұрын
Thank you so much, you explain everything with small details Amazing 👍
@TheSeamster
4 жыл бұрын
Thanks You my Friend for the comment. Part 6 will be very interesting if you have or building a Food Truck. I will show you how to have an extended bumper to set your propane tank or generator on.
@fuadodeh6369
4 жыл бұрын
Perfect, yes I’m planning to build one sooner 😊
@TheSeamster
4 жыл бұрын
@@fuadodeh6369 Yes, there are many trucks out there for a good price. But make sure you get one that has the double doors in the back and not a roll up door. When you open it, dirt and stuff falls all over the place. YOU CAN DO IT!!!!
@fuadodeh6369
4 жыл бұрын
Appreciate your advice 😊
@keithbrownii6317
3 жыл бұрын
@@TheSeamster Thanks for the video. I was wondering do you have or plan on doing a video for floor installation?
@TheImportcenter
4 жыл бұрын
I just got one for 400 and will follow ur steps...great job...
@TheSeamster
4 жыл бұрын
That is awesome and hope you enjoy the videos and there will be way more to come and showing it in service making easy fast money :) Let me know how you are coming along and maybe post a few vids on your channel. Thanks THE SEAMSTER
@susannichols4372
3 жыл бұрын
Great ideas, excellent instruction.
@TheSeamster
3 жыл бұрын
Thanks Susan, I have more to come but building a house also at this time. The SEAMSTER
@RolandAAvila
Жыл бұрын
gracias mi hermano por la instruccion
@izeokhae
3 жыл бұрын
You are simply the best
@TheSeamster
Жыл бұрын
Hope you get ur done!
@marinsvalina4476
4 жыл бұрын
Bravo, nice job... Salute from Croatia
@TheSeamster
4 жыл бұрын
Awesome and thanks all the way to Croatia!! The SEAMSTER
@bertof5455
4 жыл бұрын
Thanks alot for the videos , keep them coming
@TheSeamster
4 жыл бұрын
I am trying my friend. The SEAMSTER
@iwayanwiraatmaja7973
4 жыл бұрын
love watching inspire,great detail and support ,me maestro god bless
@TheSeamster
4 жыл бұрын
i wayan wiraatmaja You can do it!!! The SEAMSTER
@ll_distribution
11 ай бұрын
Man you totally rock!!
@TheSeamster
11 ай бұрын
Thanks
@meganbutton4320
3 жыл бұрын
Looking great. Love the tips. I'm using this stuff in my school bus conversion in the shower :) Love the positivity also! :)
@TheSeamster
3 жыл бұрын
Thanks
@bistro888
2 жыл бұрын
great video....thank you
@TheSeamster
Жыл бұрын
FRP still holding strong
@kwprovince
3 жыл бұрын
Did you ever do a video on hooking up water tanks and pump? I may have missed it. Have enjoyed these and they have been very helpful! I found your odes wheel bearing a few months ago and it was great help! I’m building a FT also so I appreciate the help!
@TheSeamster
3 жыл бұрын
I am getting to it, it will be out soon. Thanks
@miscaccount4760
3 жыл бұрын
Thanks you so much! I love your videos, it’s refreshing to have a regular guy explaining stuff & realizing some of us are trying hard as hell but still can’t afford wall to wall stainless or buying an expensive item vs making it I do have a question tho.. (I’m converting a short bus-so none of the wall channels) When you attached the wire shelf over the window what are you attaching to? It’s not an option to drill in the metal & have stuff sticking outside everywhere but I couldn’t tell what your attaching to other than the metal channels your box has. (I really don’t have anything to attach studs to other than the actual wall) Thanks again! 😊
@TheSeamster
3 жыл бұрын
Hmmmmmm, I understand and thanks for the comment. The upper shelves will most def need to be held with screws and I dont recommend an super strong adhesive, because it could break away. Without some sort of channel to screw into, I just cant recommend. Unless you have legs come up from the counter and then use adhesive to hold the clips against the wall? Then the Adhesive would not be holding the weight, but more just stabilizing your shelf. The SEAMSTER
@krakencoffeeroasters3727
3 жыл бұрын
What a fantasticly informative video. Love your tips and tricks. SUBSCRIBED! It seems to me that you could use the construction adhesive to glue a metal fender washer on the backside of your sliding FRP doors and drill a pocket for a 1/2"round rare earth magnets (like are in packages at Hobby Lobby or some such) into the FRP on the cabinet side and hold your doors in place (but magnetic seal easily breakable with a little finger pressure in your cabinet door holes.
@TheSeamster
3 жыл бұрын
Yes that is a good idea. We dont open the doors to often, only in the beginning or end of day. So we really didnt put to much thought into it. Just based it off an older food trailer we had. Thanks The SEAMSTER
@themarathon6217
4 жыл бұрын
Thanks for the motivation seamster. I know I can do this
@TheSeamster
4 жыл бұрын
YES!!! Get to it and make that easy money. Thanks for the comment my friend and let me know how you are doing in the future :) Part 6 will be very good and show how to extend your rear bumper so hold generator or propane tanks.
@pensive69
4 жыл бұрын
Excellent video. Having worked in food trucks a lot as a kid I might add that any overhead shelves like the ones around the 35 min mark need tall people head bump cushion or guards. Some thing to cushion the inevitable impact of foreheads and skulls hard at work. Just saying.
@TheSeamster
4 жыл бұрын
You are so right and the foam ones they sell in the summer for a dollar would work. The Seamster
@claragrajeda9474
3 жыл бұрын
Great video very motivated. Yes we can.. gracias
@geshaun1
4 жыл бұрын
Very good video! I'm getting started on my trailer and was wondering how to do it the right way!! Thank you.
@TheSeamster
4 жыл бұрын
The trucking channel Excellent my friend and good luck. The SEAMSTER
@terencelittlefield3222
Жыл бұрын
Thank you so much
@TheSeamster
Жыл бұрын
You can do it!
@eddiegreen2781
4 жыл бұрын
You are the man i starting my food truck now but i waiting for 6 not only to find out where you get your heater your grey water tank and the rest .I at a stand still so when can a expect 6?
@czar1177
3 жыл бұрын
Ebay is good for water tanks
@reinaldoduron2887
4 жыл бұрын
Awesome thanks a lot for the tips GOD bless you
@TheSeamster
4 жыл бұрын
Reinaldo Duron I hope all works out for you my friend. The SEAMSTER
@johnacosta7999
Жыл бұрын
Well I live in Michigan also and plan on building one I just don't know yet if it's a truck or a trailer but you have a hot dog cart that I've been doing hot dogs on and doing pretty good with that just wanted to do something that I can get by in the Winter time that's what I want to do
@TheSeamster
Жыл бұрын
That’s great most people don’t realize how much money can be made just from hot dogs!
@madcowusa4277
Жыл бұрын
I know this video is three years old now, but in that time a gallon of FRP adhesive has gone from $25 to north of $80 with tax IF you can find it. ~220% inflation. And the Home Depot FRP sheets, which used to be only considered for low budget projects and dirt cheap, are almost $50 ea with tax.
@TheSeamster
Жыл бұрын
I am glad i finished my food truck!
@RH-qk5od
4 жыл бұрын
Amazing video you put out a lot of info can't wait for the next one was up all night watching yours over and over and over super super informative thanks bro
@TheSeamster
4 жыл бұрын
Yes, my friend. You Can Do It!! Just take your time and don't be in a hurry and start buying your equipment now. Best place is on craigslist or FB marketplace. I will tell you more in Part 6!!!
@RH-qk5od
4 жыл бұрын
@@TheSeamster Can I get away with a stand up A.C.? Was thinking about venting it out the rear
@TheSeamster
4 жыл бұрын
@@RH-qk5od We had one in our PAST Concession Trailer. There was never a complaint from the Inspector as long as it don't block your path when making or selling food. Yes, it does get very hot, even with all the windows open.
@RH-qk5od
4 жыл бұрын
Hey buddy enjoy your trip to the haunted house or the Ghost Ship I have a real quick question I know you did mention it in one of your videos about which model hot water heater you will be using I'm only asking Advanced I know you mentioned that it would be in your number 6 video however I'm just trying to accumulate all my stuff before I start putting together so my question is again what hot water heater are you using thank you in advance enjoy your Halloween and I'm waiting patiently for number 6 God bless
@RH-qk5od
4 жыл бұрын
LOL one more question where did you pick up those sinks can't find them online guide me in the right path
@raymondoliver6718
4 жыл бұрын
Thanks for the videos! Great ideas! Helped out alot
@TheSeamster
4 жыл бұрын
raymond oliver Thanks for the comment my friend. More to come soon on food truck.
@alfonsoreynosa8143
2 жыл бұрын
Great videos!!! I have a question about insulation, what kind should I use on the walls?
@TheSeamster
Жыл бұрын
You can use r14 rolled or the 1 1/2 foam board but that stuff is very expensive. More videos are up and running :)
@jamessimone4356
3 жыл бұрын
Any chance of providing where the window, and other parts can be purchased, so far so good.
@TheSeamster
Жыл бұрын
Everything I buy is normally from home depot or lowes. I have new videos up for you now
@Carz4Kidz
4 жыл бұрын
I have a dodge dakota with an ARE commercial topper on it. I want to convert it to a catering or sandwich truck to feed the homeless. Can you suggest any website, video etc. That could help me with the planning and construction. By the way I think your videos are encouraging, detailed and very precise. I am a handyman of 25 years looking to transition. You Rock
@TheSeamster
4 жыл бұрын
Paul Hamer my friend I don’t know of small truck conversions. To bad you didn’t have a van or trade truck for one. The SEAMSTER
@troymccord3947
4 жыл бұрын
This is great video. I am building a BBQ competition trailer and I am at the point of covering my walls. I had decided on FRP and was doing some research when your channel popped up. I bought my FRP board and trim today so the install will start next week. Thanks for the video, you answered a lot of questions. LIKED and SUBSCRIBED!
@TheSeamster
4 жыл бұрын
Thank You my friend for the great comment and subscribing. There will much more to show in the upcoming months.
@spankysspankinbbq
4 жыл бұрын
Dude, you are awesome!
@TheSeamster
4 жыл бұрын
Thank You my Friend for the nice comment. There will be much more to come with the Food Truck Series in the near future. THE SEAMSTER
@MsISAAC7
4 жыл бұрын
a man thanks for all this videos by the way i live in Michigan to
@TheSeamster
4 жыл бұрын
Awesome!!
@allenzackery1639
3 жыл бұрын
Round corners on sink cut outs . Reduce cracks. Just saying ? Nice job 👍
@TheSeamster
Жыл бұрын
I knowwwwwwwww, mistake and moving to fast.
@hersheys307
4 жыл бұрын
Great man /dad!
@TheSeamster
4 жыл бұрын
adriana torres Gotta Keep On Pushing!! Thanks for the watch my friend. The SEAMSTER
@msarria
4 жыл бұрын
Once again awesome video! What in your opinion is the better truck to buy?
@TheSeamster
4 жыл бұрын
I am very found of Chevy, based on cost of repair. Also, I prefer a gas engine, because of cost of repair compared to a diesel engine. Stay tuned for Part 6, I will show you how to extend your rear bumper to put your propane tank or generator on and much more :)
@guidononya7368
2 жыл бұрын
I know you said try and find a $2500-3500 truck, however I am looking for a certain look that goes with my Truck name. So unfortunately my truck is going to cost me $13,000. What is bothering me is the sizes of the trucks. I was recently at an event, the owner Of a truck was operating a high end clothing business and she told me the event charges $450 for a vender spot. But because she was in a 24 ft truck rather than a tent, they charged her for two spots. $950. To park her truck on a public street for a Fall Wine event. So I am a little worried about the truck I am looking at since it's closer to 30 ft.
@TheSeamster
Жыл бұрын
Yes that is true
@djcheeseproductions
4 жыл бұрын
i would love to see part 6
@TheSeamster
4 жыл бұрын
It will coming very soon and much much more on food trucks. Winter snow is slowly coming to an end! THE SEAMSTER
@ericbrinson9744
Жыл бұрын
Thanks
@TheSeamster
Жыл бұрын
Very Good and I hope all goes well for you.
@themadoct
3 жыл бұрын
I love the channel i just sub i love your content im looking foward to make another i mad one and i give up after it was done now i missed it i will make another thanks for the support with this vids from one you tuber to another keep up the good work 💪
@TheSeamster
3 жыл бұрын
Thanks for the watch. The SEAMSTER
@marks7352
Жыл бұрын
would the pvc panel type melt with the heat in those food trucks/trailers? Their a lot cheaper then the FRP board.... Also instead of using the knife to cut the tube opening the caulking gun has a hole to cut it. This I'm sure you know. Great video and I really like the idea on the shelf hanger... Thumbs up and I'm subscribing... Thanks
@TheSeamster
Жыл бұрын
Yes melting could happen with deep frying and my tub cutter crimps my plastic. Thanks for the sub
@marks7352
Жыл бұрын
@@TheSeamster I haven't been able to find part 6. Have you done that one yet?....I'm watching installing the windows now. Really appreciate the videos. And you're a funny guy. your hyper keeps it interesting and no back ground music... Thanks
@davidmichael6783
4 жыл бұрын
Great video, I will use your advice, Thanks !,
@TheSeamster
4 жыл бұрын
Thank You David for the comment. I am trying to do this at the lowest cost but with quality. THE SEAMSTER
@kashifwright152
4 жыл бұрын
Good looking thanks👍
@TheSeamster
4 жыл бұрын
Kashif Wright Thanks for the nice comment. I hope you start your own food truck and work for yourself. The SEAMSTER
@johnlindsey1505
4 жыл бұрын
Hay Brother , I enjoy your videos . [food truck ] We learned a lot. Is there a part six ? would also like to see the back bumper [ platform ] you were making. Looked you up on face book but could not find you. God bless stay safe.
@TheSeamster
4 жыл бұрын
John Lindsey Yes much more to come on food truck. A lot of businesses closed at this time. The SEAMSTER
@waynevolcom2179
3 жыл бұрын
Hi I’m building my food trailer my own and your videos are very helpful. I been looking if you have a video about the vent hood exhaust bc I purchased comercial one but didn’t fit on my trailer. Is to big I’m wondering if I can used one from Home Depot? Bc I don’t know if they require specifically one regarding to pass the inspection.
@TheSeamster
3 жыл бұрын
I will be using a home one also. Depends on your state, call and make sure. Some require fire suppression systems.
Пікірлер: 435