I have no use for people who complain simply to hear themselves complain... just keep doing what ya'll are doing, the rest of us sane people enjoy it.
@Indy1977TX
Ай бұрын
Thank you for the resin safety materials. It is appreciated.
@FineScaleModelermagazine
Ай бұрын
Of course! We want everyone to be safe!
@bobrivett7645
Ай бұрын
You can't make everyone happy all the time, though we try too. In my humble opinion you all at FSM online or hard copy are doing a fine job. If i didnt think you were i wouldnt be here. Im not interested in Tiger tanks, i like the early german vehicles Pz1, II, III and IV. I also like the german wheeled vehicles. Actualy in 1/35 scale anything that was recon based, armored car, light half tracks, jeeps, motorcycle's thats my thing. Like miniarts new M3 tanks. Anyway thanks FSM, Have a good weekend all.
@krzysztofmathews738
Ай бұрын
Thank you for the how-to on resin wet sanding. That's good and useful!
@scottbuildsthemall5124
Ай бұрын
Great tip on wet sanding resin parts! Please continue to show the new kits that are coming out. If the subject is not of interest to me I can simply fast forward to the next segment.
@thewaynesiewatsg
Ай бұрын
Great tip on sanding the resin parts in water! I really love how you guys are also extra mindful to share tips on how we can be responsible modelers as well. The coffee filter tip is good!
@georgemcdonough5724
Ай бұрын
Guys you keep doing what you do, and review as they come , To those who do not like the new kit review at the time , your computer has an off button as well as a mouse to turn it off, Keep showing all that you get ..
@dereksoutherland3575
Ай бұрын
Thanks for doing a little of everything! I mainly build WW2 US, but I have learned techniques, ideas, tips, and tricks from other subjects such as axis vehicles, British vehicles, cars, boats, Gundam, and more. It's amazing how many things can cross between multiple subjects. In the end, we all enjoy and love this great hobby...that is until the next tiny piece goes flying across the room into oblivion. 🤣😅
@billestew7535
Ай бұрын
I used to have a gripe with manufacturers who were putting out kits of axis vehicles that never saw service or some that never even went in to production, when there were still plenty of allied vehicles that did see service that were not in kit form or if they were they were expensive resin kits, but I must admit a lot of manufacturers are now putting out a lot more allied vehicles and aircraft that never got this attention before and I for one am quite happy about it.
@Chilly_Billy
Ай бұрын
You have to think in terms of the international marketplace. A lot of modelers want to build something other Shamans and Mustangs. Nationalism plays into it, too. (Yes, Fine Molds, I'm looking at you!)
@user-mz6we2td9m
Ай бұрын
With resin you need a way to clear the dust. A mask will help while you are sanding, but the particles will hang in the air for hours. A shop vac without a HEPA filter could just recirculate the dust. Maybe add a room air purifier to get the stuff the shop vac misses.
@garybaran501
Ай бұрын
The only thing I'm unhappy with the tanks ( German) from WWII is the amount of people who cry out about the Swastica . They were on the vehicles so stop complaining.
@Indy1977TX
Ай бұрын
I run a modeling forum and had someone get big mad for accurate late 1930s German markings on a vehicle. I told him the line was those markings used on historically accurate subjects were going to be allowed. Putting swastikas on any other subject, no go. People think historically accurate is endorsing the bad things attached to it, I do not see it that way. YMMV Posting this to say, keep up the good work here FSM crew!
@donstevenson2660
Ай бұрын
Or, you could build them as captured with Allied markings.
@Indy1977TX
Ай бұрын
@@donstevenson2660 For a military vehicle, that is a possibility. My case was a grand prix car, it did not run any other schemes.
@donstevenson2660
Ай бұрын
@@Indy1977TXI assume you've got a W125. If you check Goodwood Festival of Speed this week, you will find immaculate restorations which do not have the marking.
@gordon8753
Ай бұрын
My armor models consists of around 80% German it's just a more interesting array of different subject matter/vehicles. As for the swastikas that's history and history shouldn't be erased.
@samuelvasquez8170
Ай бұрын
Great tip
@travisehlers2884
Ай бұрын
Just because I build a Fokker DR1 doesn't make me a WWI German sympathizer, nor does building a FW190 make me a Nazi. It's all history and it should be remembered. Destroying parts of the civil war memorials is wrong, the war happened, we are happy with the outcome don't let it be forgotten.
@Warshipmodelsunderway
Ай бұрын
It seems pretty simple; if you don't like a subject, don't buy it. It's not like there is any lack of choices in this Golden Age of scale modeling. I just got a 1/16 scale Puma armored car that I pre-ordered back in January - who would have thought we would ever see that? 1/200 scale battleships? A 1/32 scale TIE fighter? Just kick back and enjoy the hobby of collecting - and very occasionally completing - the model kits you like! 🙂
@bobrivett7645
Ай бұрын
Gotta agree with your simple truth. It's a great time to model
@robertanderson1907
Ай бұрын
I wet-sand everything (not just resin) due to the dust-control aspect. However, a side benefit of wet sanding is that whatever you're using to sand - whether it be sandpaper, a sanding stick, or a sanding sponge - doesn't "load up", either. So you don't get that annoying build-up that makes sanding harder and can actually scratch your finish. I also wear thin nitrile gloves so my hands don't shrivel up and get the wet sanding "goop" all over them, but they still have enough feel that you can tell when a surface is smooth enough to stop sanding. As for the topic of which models you review, is the concern about which *models* you review, or which *companies*? I ask because, imho, there seems to be an inordinate amount of kits from Trumpeter, Takom, HobbyBoss, Eduard etc, and it does seem to be the same manufacturers over and over. It could be that they are the most prolific manufacturers, but hasn't say, Revell USA or Revell Germany released anything in awhile? I can't remember the last time I saw them featured for anything. Personally, I don't really care what/who gets reviewed - all new releases are welcome - but I do catch myself saying "Oh. Trumpeter again?" when they are featured for the umpteenth time and I *am* curious about other manufacturers. Just saying.
@MajorDisappointmentModels
Ай бұрын
When color sanding a 1:1 car paint job we add some Dawn dish liquid to the water so the sanded paint doesn't stick to the car. Do you think it is a good idea for resin sanding?
@janvanrenselaar5998
Ай бұрын
yes i do also a dishwasher liquid in my water when i wetsand my carbody,s. 2 reasons, first as you say,the paint dont stick and 2th the water works as a lubrificant and a remover from paint, gives a better result after sanding, but don,t push to hard, let the sandingpaper do the work
@charleshawes3670
Ай бұрын
T-7 Red Hawk 1/48 how long before we see more than Fox Run kits
@dariosmodelbuilds
Ай бұрын
I like ALL models. Don't be swayed by anyone that tells you they don't like a particular model category. That is just their opinion and not the opinion of others. Frankly I would avoid any source that I knew were discriminating topics, themes or categories.
@bennettrogers7921
Ай бұрын
I thought the carpet monster is bad… a shop vac near a dropped piece would give me everlasting nightmares. Maybe a fine mesh screen in front of the nozzle, if that doesn’t defeat the whole purpose.
@janvanrenselaar5998
Ай бұрын
old pantyhose from the misses works like a dream against that for ever hungry monster
@bennettrogers7921
Ай бұрын
@@janvanrenselaar5998 bingo, that would work!
@roberttaylor9259
Ай бұрын
What's going on with the grit conversions of sandpaper?! I found a chart a few months ago. I guess it was micro-mesh's chart. I mean I get the US conversion since the world doesn't use inches but how are the others different that don't use mm
@donivanpotter2762
Ай бұрын
Yeah. The swastika has been throughout history but better known for Germany WWII. It's a sensitive subject but sometimes to be accurate it needs to be used. I've done movie posters and there's questionable things but again it's still art. I've been building a 1/16th tiger 1 for over 15 years. I've tried to make everything I can function like the real tank in miniature. From making the tools out of metal and wood to using scratch made brass parts. I guess I enjoy the build, trying to figure out how things worked more than I do the finished model. My best to everyone. I don't see replies
@mikesackmary
Ай бұрын
People who don't like Axis models should keep their complaints to themselves
@mitchellambrose2293
Ай бұрын
Y'all keep doing what Y'all do, don't cave under pressure from the woke!
@PartsTreeC
Ай бұрын
as a viewer that often watches with headphones, please stop hitting the table 🤣
@agenttdawg9640
Ай бұрын
"Lies. Deception." 🖖🤣
@agenttdawg9640
Ай бұрын
& yes, "sanding paayd", too 😂
@slougo5909
Ай бұрын
I gotta question for you's 2, Why are 1/35, 1/32, 1/48 military/Ship kits SO Detailed, But 1/25, 1/24 model car kits aren't? What gives
@robertjensen1438
Ай бұрын
Just a comment for the algorithm
@angelohernandez6060
Ай бұрын
Now, I'm one of the "why cars?!" guys. You already have a whole mag dedicated to model cars and we only have the one that has to share valuable space with aircraft, ships, figures and sci-fi among other subjects. I really don't like building cars so I don't care. Especially since your mag is more of a pamphlet now with the lower page count. It's the main reason I quit my subscription.
Пікірлер: 44