It seems pretty impressive what your lab has become. Great job Amir!
@EnergySeeker
2 жыл бұрын
thanks a lot :)
@HouseMastersTools
2 жыл бұрын
Majstore svaka čast , već treći put gledam pokušavam sve pohvatati 🛠
@dron7995
2 жыл бұрын
Красота
@EnterTheRealm
2 жыл бұрын
Looking good bro.
@EnergySeeker
2 жыл бұрын
you are the one started this and i just made it custom for my generator so you made it for a motor to make it as motor/generator and i converted a generator to a motor/generator :)
@jensbuchholz5766
2 жыл бұрын
Super 💥
@energyhack3538
2 жыл бұрын
Cool set up. The other three lamps look to be well below 100 watts based on bulb brightness.. wouldn’t their power consumption be 74v * .58A = 43watts 100 watts in fly back + 43 watts in load = 143 watts out but 327 watts in , about 43% efficient..?
@EnergySeeker
2 жыл бұрын
yes the back emf is putting over 100 watt easily and the other 3 or 4 lamps also 100 watt each and the consumption was 440 watts so there is a gain but it’s small I mean it’s like maybe 50 to 100 watts and that is not really what after BUT do t forget this was at 450 rpm so what will happen at 1500 rpm or even 2000 rpm maybe the magic will happen there but you know I burned like 15 mosfet from that back emf lol anyway maybe one day I will come back to it but I put it so people know it can be done and maybe someone will go further
@Timtron432
2 жыл бұрын
nice!
@hamedelyasi1609
2 жыл бұрын
👌👍
@MrDKONZEN
2 жыл бұрын
Hi Amir Looks good nice work! Whats the wattmeter say , is that 327 watts or 32.7 ? Is that the input to the motor, or the output? You say in and out is almost the same, what about that backemf light as some watts too? Thanks for the video good job
@EnergySeeker
2 жыл бұрын
Hi the back emf is putting over 100 watt easily and the other 3 or 4 lamps also 100 watt each and the consumption was 440 watts so there is a gain but it’s small I mean it’s like maybe 50 to 100 watts and that is not really what after BUT do t forget this was at 450 rpm so what will happen at 1500 rpm or even 2000 rpm maybe the magic will happen there but you know I burned like 15 mosfet from that back emf lol anyway maybe one day I will come back to it but I put it so people know it can be done and maybe someone will go further
@heliarc5186
2 жыл бұрын
Dang that's Hella workmanship. Did you have those laser cut sides? Very interesting work.
@EnergySeeker
2 жыл бұрын
no i didnt its a ready Gnenerator from Unknown source
@miltongabrielacevedoperez7793
2 жыл бұрын
Estupendo trabajo q vatiaje genera y cuantos amperios
@EnergySeeker
2 жыл бұрын
i did not test the max speed so i cant know for now how much is the capacity
@ChrisMcNeely
2 жыл бұрын
I see what you did there lol
@EnergySeeker
2 жыл бұрын
there is no magic lol
@lustatus
2 жыл бұрын
Any feed back regarding spinning the metal between magnet and winding concept project? Was it a success?
@EnergySeeker
2 жыл бұрын
not yet
@arturo4700
2 жыл бұрын
How many real kw is the "30kw" Generator ?
@EnergySeeker
2 жыл бұрын
i would think its 5 to 10 max
@mykedoes4099
2 жыл бұрын
see my open source unipole video after you watch my energy loop video explanation
Пікірлер: 24