Really appreciate your taking the time to put this out there brother. It saved my ass several times and I could not have done it without you. Saved me $678.00 to have it done at the dealership! Thanks again…
@ridefitnation
Жыл бұрын
Heck yeah
@justinspeegle952
Жыл бұрын
Great instructional. The right amount of detail without bogging down the video. I installed new bars with your help, thanks.
@ridefitnation
Жыл бұрын
Happy to help
@THEBIGCHULETA
25 күн бұрын
So if you do get a code, how do you clear it out? On my dash it shows’ECM Y’ instead of ‘ECM N’. Is this something I’ll need a lab top/dealership intervention? Never mind,… it cleared! Great tutorial!
@kurtfoulke5130
Жыл бұрын
Well done 👍 New bikes are so much easier than back in the day & the internal wire harnesses really clean up the whole area.
@ridefitnation
Жыл бұрын
Agreed
@barrymako
Жыл бұрын
Great video. I was gonna pay someone thinking it's out of my skill set but you made me change my mind
@ridefitnation
Жыл бұрын
You got this! Keep me posted
@danpeoples1000
Жыл бұрын
Great video - Thanks for making this. It was nice to hear you go into detail on some of the finer points that other videos seem to skip.
@ridefitnation
Жыл бұрын
Happy it helped Dan
@THEBIGCHULETA
6 ай бұрын
Looks easier than doing a twin cam softail. I like the chosen bars.
@donaldsoncole3095
Жыл бұрын
Sharp presentation with a unique perspective!!! 🇺🇸🇺🇸🇺🇸
@ridefitnation
Жыл бұрын
I appreciate that!
@derekpascoe3412
5 ай бұрын
Bro this video is amazing.
@ridefitnation
5 ай бұрын
Glad you liked it
@MightyMike55
8 ай бұрын
Thanks for such a well narrated and detailed video. Would you say I could get away with installing a 16 inch set of dominoes without an extention kit? I live in South Africa and just imported a set of 16 inch dominoes from Handlebar Lee, challenge is our Harley dealer does not stock extention kit nor is there local availability of such
@ridefitnation
8 ай бұрын
Nope. You have to change everything
@MightyMike55
8 ай бұрын
@@ridefitnation Thats disappointing. Mind sharing a link to the extension kit(s) you used on your bike install
@MightyMike55
8 ай бұрын
@@ridefitnation Thanks for the prompt response. Does that also apply to the clutch and brake cables or just the electronic wiring would be too short for 16 inch bars?
@ridefitnation
8 ай бұрын
@@MightyMike55 every thing. It’s not as hard you may think
@evanpimental
8 ай бұрын
"And when I say brother, I don't mean, like, an actual brother, but I mean it like the way black people use it." - Zoolander 😂 Nice bike. Thanks for the video! Very informative.
@ridefitnation
8 ай бұрын
😂
@GlidewitTy
2 жыл бұрын
Ok buddy so how much are you going to charge me to do mine…I’m going 16”
@ridefitnation
2 жыл бұрын
That's an entirely different job. much more involved.
@oscardarnelljones3939
8 ай бұрын
Great class, I have 18 inch game changes
@ridefitnation
8 ай бұрын
Dope.
@jtmartin8076
Жыл бұрын
Thanks for the info. I just needed to adjust my handlebars not replace
@ridefitnation
Жыл бұрын
Well done Martin
@d-xterminatormotovlog
2 жыл бұрын
Nice work, very precise, well done job!✊🏾
@ridefitnation
2 жыл бұрын
Much appreciated.
@deigo2629
Жыл бұрын
My dude .... awesome video ... bout to do this ... I got the push back seat and full arm extension is killing my carpal tunnel.. I'll be doing the stereo Rockford Fosgate stereo to the 2nd amp and lowers and bag speaker upgrade .. hoping you got a video on that as well
@ridefitnation
Жыл бұрын
I’m doing sound on my Bike last. Not important to me yet.
@deigo2629
Жыл бұрын
@ridefitnation ok well if you go Rockford Fosgate... id highly recommend getting through the dealership or call Rockford directly... theres a special kit to put the amp in the bags all plug and play
@UgenetheFlagman
2 жыл бұрын
Good little tutorial . Thanks . Cheers
@ridefitnation
2 жыл бұрын
Much appreciated
@oldguy6434
Жыл бұрын
I just finished my road glide bars .Thank you
@ridefitnation
Жыл бұрын
Good stuff Old Guy
@LayLo-69
2 жыл бұрын
Give Thanks!!! When we gonna start this Class. Lol
@ridefitnation
2 жыл бұрын
Waddup Lawrence. Which class are you referring to?
@LayLo-69
2 жыл бұрын
@@ridefitnation Motor cycle remodels.Lol
@ridefitnation
2 жыл бұрын
All facts @@LayLo-69 💪🏽💯
@krich1706
2 жыл бұрын
Good video. This is going to help a lot of people.
@ridefitnation
2 жыл бұрын
Thanks Kev. That’s the goal. 👍🏽💯
@jamaicanjjason
2 жыл бұрын
Excellent! Thanks for sharing bro
@ridefitnation
2 жыл бұрын
Thank you for watching
@kellybgliding
2 жыл бұрын
Nice video and a great job on the bars. 👍🏾👍🏾
@ridefitnation
2 жыл бұрын
Thank you Kelly
@armandcolson1979
Жыл бұрын
Dope detailed install I’m looking at 18” as we speak
@ridefitnation
Жыл бұрын
18’s will require a bit more work. But good stuff Armand
@chevyandrews1419
Жыл бұрын
Great breaking down brother
@ridefitnation
Жыл бұрын
Thanks Marcus
@smilysbable
Жыл бұрын
So with the 14s you don’t have to change the wires and how much taller from the factory bars and how comfortable are they driving on the highway And can you maneuver a good in and out of traffic??
@ridefitnation
Жыл бұрын
It’s much taller than the factory bars. Do Front is all based on the individual. Handling of a bike with any bar is based on the rider.
@Eddiealcazar
11 ай бұрын
I apréciate the way you explain everything man
@ridefitnation
11 ай бұрын
Thank you
@samsam-dl9kt
Жыл бұрын
Great job, you made that look easy, bars look great,Thxs👍
@ridefitnation
Жыл бұрын
Thank you
@JUNEYSKI90002
Жыл бұрын
Great job! Keep the videos coming bro!
@ridefitnation
Жыл бұрын
Thanks June
@theuswardlow84
10 ай бұрын
Good information
@mikefoxx308
Жыл бұрын
You're a bad boy. Wish you were here in NC
@ridefitnation
Жыл бұрын
Much appreciated Mike.
@dirtydingo49
Жыл бұрын
You actually did a really good job on your video.
@ridefitnation
Жыл бұрын
Thanks
@kevindavis-nu8iw
Жыл бұрын
thank you ,great work bro , ima install my 16" hammerheads my self. the dealer try to charge me 1300 dollars and said that if I do it my self it will void my warranted . we'll fuck it void my warranted then lol .
@ridefitnation
Жыл бұрын
They are lying to you man. Only engine parts can void your warranty. You will need to remove the tank which is easy as heck to run your new break line. Save that money and get to know your bike. Don’t get frustrated with it and take your time.
@timhiller1029
Жыл бұрын
Excellent video thanks
@lyndonmccorkle8415
Жыл бұрын
I just got my new 12" bars in from FedEx and dealership wants to charge me $1,200 to put them on wow
@ridefitnation
Жыл бұрын
What bike?
@lyndonmccorkle8415
Жыл бұрын
@@ridefitnation 2021 Street glide
@arthurfleming4449
Жыл бұрын
Peace and Blessing Thanks very clear.
@ridefitnation
Жыл бұрын
Happy to help
@juchipila323
Жыл бұрын
Great tutorial!!!
@ridefitnation
Жыл бұрын
Thanks
@engscott78
Жыл бұрын
Thanks for sharing
@ridefitnation
Жыл бұрын
Thanks for watching!
@bubbadaluva191
Жыл бұрын
Thank you , Harley wanted 1,000 for this wow.
@ridefitnation
Жыл бұрын
Sounds about right. Happy to help
@nicholasg122
Жыл бұрын
I been checking out a lot of these videos. Not one of them has changed the riser bushings. Should just be one ground wire and three pinch bolts on the top tree.
@ridefitnation
Жыл бұрын
I changed the riser bushings on my personal bike because I have 20” bars. I didn’t have any wires on mine. Just the two bolts. Not sure what you mean by three pinch bolts and ground wire. Explain.
@nicholasg122
Жыл бұрын
Just trying to figure out how the riser bushings are changed out on the Road Glides. Harley recommends changing them. I saw a video were they pulled off the top part of the tree. Because of those bushings there was a ground running up to the bars. Maybe I will just invest in service manual.
@nicholasg122
Жыл бұрын
Your video was helpful I learned some things from it don’t get me wrong. Actually your video was better than the other ones I seen.
@duanegorham2018
Жыл бұрын
Nice work. Thanks for the Video
@ridefitnation
Жыл бұрын
You are welcome Duane
@lyndonmccorkle8415
Жыл бұрын
Very good job, well done 👍
@ridefitnation
Жыл бұрын
Many thanks
@davidharper9014
2 жыл бұрын
Well done! Thanks for sharing. What bars did you put on?
@ridefitnation
2 жыл бұрын
Thanks David. These are 14” Dominoes from handle bar lee
@AFB420
11 ай бұрын
Did you have to swap the brake and clutch cables?
@nicholaswlandry
Жыл бұрын
Will this be same process for the 2023 Road Glide?
@ridefitnation
Жыл бұрын
Don’t see a reason why it should be much different.
@mrpack1
Жыл бұрын
100% the same.
@mervindale1288
Жыл бұрын
Bro you just saved me like 700 + if your ever down in florida hit me up I'll take you and yours out for dinner !
@ridefitnation
Жыл бұрын
What’s up Marvin I’m always happy to help. Which part of Florida are you located?
@mervindale1288
Жыл бұрын
@Ride Fit Nation I'm located in Jacksonville! Just finished the bar setup last night I picked it up yesterday and I love it
@acura1legend
Жыл бұрын
Where did he find the 14 inch pullback bars from?
@ridefitnation
Жыл бұрын
Handlebar Lee is where I got it from for him. Ask for Bill
@user-mt3me9kd2y
Жыл бұрын
Awesome video brother
@ridefitnation
Жыл бұрын
Thanks James
@CarsonIvie
Жыл бұрын
What is the diameter of the risers on stock 2022 road glides? I have the ST and need to do a 14in bar swap. Will 1.25in bars not fit in the stock riser?
@ridefitnation
Жыл бұрын
It’s 1..25 but I’m not sure what size you need for your bike. Call HD to confirm.
@StephenRobinson-jr3zs
Жыл бұрын
Nice work Bro!! Thanks
@ridefitnation
Жыл бұрын
You’re welcome
@aceovereight
Жыл бұрын
Sweeeet sled. Respect.
@ridefitnation
Жыл бұрын
Thank you
@scothuddleston9934
Жыл бұрын
Well done sir.
@ridefitnation
Жыл бұрын
Thank you
@B1boi
Жыл бұрын
Please help…have two skinny connectors left unconnected. I’ve researched that one/ male connector is for heated grips. The other is coming from the bike itself not the handle bars…what’s it purpose?? Thx
@ridefitnation
Жыл бұрын
You have to be way more specific on what you’re talking about. Email me RIDEFITNATION@gmail.com send a few pics as well B1boi.
@B1boi
Жыл бұрын
@@ridefitnation thx I figured it out. The connector coming from harness is the power for the heated grip, which u have to remove the cap. The other connector coming from the throttle by wire from the bar itself is also for heated grips.
@ridefitnation
Жыл бұрын
@@B1boi happy you got it. Well done 👍
@ls2surf485
Жыл бұрын
How did you take LH side grip off?
@ridefitnation
Жыл бұрын
Are you referring to the stock one. If so, use a long screw driver to pry it off. It’s glued down tight.
@shadmcpherson4512
Жыл бұрын
Hi, did you run both throttle wire and buttons wire at the same time? If so how? I can't understand how to make it work.
@ridefitnation
Жыл бұрын
No. Run throttle owes first then the power wire harness second. Use a thin strong chain. You have to be patient.
@shadmcpherson4512
Жыл бұрын
Thankyou!
@ridefitnation
Жыл бұрын
@@shadmcpherson4512 you will feel like it’s not working but it will. As long as you push and pull slowly
@shadmcpherson4512
Жыл бұрын
So I got it all back together and my gauges will not come on. Screen says low tire presser and no button's work.
@ridefitnation
Жыл бұрын
@@shadmcpherson4512 if no power is coming on then you probably connected the wires wrong down by the handle bar riser area. Low tire pressure is a error code that you can clear or harley could clear it for you.
@shermanjack7251
2 жыл бұрын
A1 job
@ridefitnation
2 жыл бұрын
Thanks, Sherman
@kevinduhon9465
Жыл бұрын
Hey bro who makes those bars
@ridefitnation
Жыл бұрын
Factory 47
@brents1643
Жыл бұрын
Nice job
@ridefitnation
Жыл бұрын
Thanks Brent
@1981gangsta
Жыл бұрын
What handle bars are those called
@ridefitnation
Жыл бұрын
Meat hook from Factory 47
@toddjohannesen2082
Жыл бұрын
So I can go 14” without extending the clutch cable on a 2022 road glide limited?
@ridefitnation
Жыл бұрын
Yup
@juniorgillard3936
Жыл бұрын
Where u got the bars
@ridefitnation
Жыл бұрын
Factory 47
@cliffbarnes-eh4st
5 ай бұрын
New york
@rsanchez5676
Жыл бұрын
Instead of “being careful why not cover your tank ! 😮
@ridefitnation
Жыл бұрын
Which video are you watching. Do you not see that huge blue blanket over the tank?
Пікірлер: 140