Padding will be added! Sometimes we don't have time to do all the finishing touches on a project before the video comes out, so especially in the Hacklorian series, little adjustments and detail work will be done before the final test video =) In this case, padding, and maybe, just maybe, thermal/HUD etc!
@bobinster9464
3 жыл бұрын
Ok
@bobinster9464
3 жыл бұрын
Huh
@silverphoenix9204
3 жыл бұрын
Call The Child The Child, Baby Yoda, Grogu, but I will always call him King Behbeh.
@justinflomingo3269
3 жыл бұрын
You guys are awesome
@silverphoenix9204
3 жыл бұрын
OH IF YOU MIGHT BE DOING IT WITH THERMAL/HUD ETC WE SHOULD GET EXITED!
@Whacintosh
3 жыл бұрын
You need some padding in it so that it’s comfortable and doesn’t just rock around on top of your skull.
@braydenbrown8930
3 жыл бұрын
Yea thats what I thought
@Menma_Furikake
3 жыл бұрын
Yea thats what I thought also Brayden you spelled that's wrong do better for the next time I need to steal your comment
@braydenbrown8930
3 жыл бұрын
@@Menma_Furikake haha ok 😂
@mustangthekitten7765
3 жыл бұрын
@@Menma_Furikake you did too
@S5R_0005
3 жыл бұрын
@@mustangthekitten7765 no he didn't?
@ALEXLAB
3 жыл бұрын
At least here we have no firearm demonetization) Awesome work!
@Maui_Editz
3 жыл бұрын
Hi
@itiswhatitis7740
3 жыл бұрын
Collab with hacksmith
@lucashull1012
3 жыл бұрын
Next we have the Saber word
@lucashull1012
3 жыл бұрын
Sword
@lukettc1069
3 жыл бұрын
HOW IS THIS A WEEK AGO THIS WAS RELEASED A DAY AGO ohhhhhhh your a member
@om1_10
3 жыл бұрын
I am so ready for this whole series
@Mesrmsh
3 жыл бұрын
Oh Yeah
@nodoesntcare7090
3 жыл бұрын
It's already done
@obiyobi3939
3 жыл бұрын
@@nodoesntcare7090 no it isnt xd
@nodoesntcare7090
3 жыл бұрын
@@obiyobi3939 then why is the mask done at the end
@nodoesntcare7090
3 жыл бұрын
@Shrek do you realize how long that's going to take of all metal
@pieguy5692
3 жыл бұрын
As an historical armourer, to make a "dome"/skull for a helmet we heat the metal and dish it into a round dishing form usually made from a stump by hammering it into the form. Afterwards we would smooth out everything by planishing, which is like polishing with a hammer. Then we would polish it with sandpaper and such. Most modern historical armourers would do the skull in two halfs and then weld them together.
@RegalRadish
2 жыл бұрын
👍
@AscendingAdventures
Жыл бұрын
Welds are potential split lines, so that makes sense.
@GUARDIANA01
Ай бұрын
Exactly this ! I deal in historical Japanese armour and the traditional iron lame technique we also still use for the Kabuto . 🙏⛩️😉
@sh4rpshooter782
3 жыл бұрын
James: "I don't weld" Also James: "I designed this wrist stand to help keep your arm still during welding"
@chrispeterson4594
3 жыл бұрын
Sell the stand!
@n.l.3776
3 жыл бұрын
And then proceeds to not use it once in the timelapse
@Beamer1969
3 жыл бұрын
Not what he said He said I’m not a welder and that is because there are tests to pass if you want to call yourself a welder
@Prince_of_X
3 жыл бұрын
@@Beamer1969 yeah I know I hated when you workpiece gets sticked to electrode and gives you a panic attack when using it for the first time
@MrGoesBoom
3 жыл бұрын
@@chrispeterson4594 right? bet he could make some good side income for the business selling those
@TurtleTrinity26
3 жыл бұрын
I love the subtle reference of the laser cutter remote on his arm like Mando’s wrist computer! Great job Hacksmith!
@hacksmith
3 жыл бұрын
Someone noticed!!!
@TurtleTrinity26
3 жыл бұрын
I’ve been noticed by Hacksmith 🤩 I’ve waited for this day for a long time!
@danielroos5577
3 жыл бұрын
@@TurtleTrinity26 congrats man!🔥
@TurtleTrinity26
3 жыл бұрын
@@danielroos5577 thanks man!
@danielroos5577
3 жыл бұрын
@@TurtleTrinity26 shot bro, have a great day ~ from South Africa.☺👍
@DTeK
3 жыл бұрын
0:04 "this is the way"
@ワˬワ
3 жыл бұрын
To your moms room
@Flome810
3 жыл бұрын
To my white van
@JustAshbean
3 жыл бұрын
to my dad's shed where ppl are hanged
@Alex22034
3 жыл бұрын
To your ex's house
@danasiegbunam6358
3 жыл бұрын
@@ワˬワ ??
@curr3ntgam1ngyt23
3 жыл бұрын
2089: today we are making a real yoda that can use the force!!
@jettbegetis4576
3 жыл бұрын
today we are genetically engineering a Real Life Yoda that can use the force!
@Soron661
3 жыл бұрын
3020: today we are making programmable matter from Star Trek: Discovery season 3
@ray5952
3 жыл бұрын
For now they are using the fork
@ratchricane1971
3 жыл бұрын
4036: Today we'll be making a quantum bridge from Ant-Man and the Wasp that actually transports us to the quantum realm!
@animeweebboy9759
3 жыл бұрын
5097:Today we are making the deathstar from starwars a new hope
@AlysonTabbitha
3 жыл бұрын
THIS IS SO AWESOME! I've been loving these videos!
@hacksmith
3 жыл бұрын
Glad you like them! Your makeup skills are inspirational! I just wear a metal bucket on my head ;-)
@rohitwankhede9153
3 жыл бұрын
@@hacksmith lol
@skycreeper1116
3 жыл бұрын
@@hacksmith HAHAHAHA
@crazycattheboss
3 жыл бұрын
@@hacksmith XD
@zzzzzzznnnnnn123
3 жыл бұрын
Yesss buckettsss
@thebigdustin
3 жыл бұрын
“I’m not actually a welder but I have a grinder.” A grinder and paint make me the welder I ain’t, as the saying goes.
@Jonathan-fo4ur
3 жыл бұрын
Why has this saying been in my head ever since i heard him say it lol
@moment7732
3 жыл бұрын
*_Yeah~_*
@johnsherby9130
3 жыл бұрын
I love how his cad skills were so good that the prop visor popped right into place
@2323T
11 ай бұрын
I know
@shadowdested5870
3 жыл бұрын
That seems pretty uncomfortable without any padding on the inside lol.
@DraconixMahvri
3 жыл бұрын
Oh, it is. Take it from me, unpadded helmet? That cinder block had to HURT. Not to mention, the interior of the helmet had to ring a little like a bell.
@Boba_Fett_Bounty_Hunter
3 жыл бұрын
We Mandalorians don’t need padding, we’re not wimps who are scared to get hurt in battle.
@King_Aku
3 жыл бұрын
@@Boba_Fett_Bounty_Hunter tru
@hwykng82
3 жыл бұрын
@@DraconixMahvri i was worried about his neck too
@rita-want-sex152
3 жыл бұрын
VCBVCB
@McEvoid
3 жыл бұрын
I am sooooooo exited to see James wearing the whole set
@albertknabe3713
3 жыл бұрын
"Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife"
@DragonessKim
3 жыл бұрын
A little disappointed that the mando helmet didn't get the thermal camera added. Still, one beautiful bucket.
@kaboomgaming4255
3 жыл бұрын
Nah, it's leaky because part of it is made of plastic
@itswaytoocrasyright3433
3 жыл бұрын
I'm a huge fan of samuel Kim who did the musics i'm so happy it was in the video !!!
@friartuck103
3 жыл бұрын
Man, I still can't believe how far you've come James! I remember when you were in your little garage lifting cinder blocks with your Exo-suit V.1. It's crazy!!!!!
@AirsoftAlfonse
3 жыл бұрын
this is awesome! keep up the great work!
@doesntmatter007
3 жыл бұрын
Yea
@botanistmartian3954
3 жыл бұрын
Lmao ikr
@lelogi2724
3 жыл бұрын
A surprise, to be sure, but a welcome one!
@rights4469
3 жыл бұрын
Nice comment
@oshwaflz
3 жыл бұрын
OMG I was just thinking about how they should collab with you for a vid
@jaxx_waltz
3 жыл бұрын
This is so awesome, you guys gotta do a Jedi vs mandalorian battle with this.
@lucasboyas5053
3 жыл бұрын
oh no, the casualties
@samsjunk1
3 жыл бұрын
Unfortunately I think the lack of actual Beskar would make it an unfair fight
@wearddod7637
3 жыл бұрын
@@samsjunk1 if the mandalorians armor was made out of tungsten it would make a fair fight
@jaxx_waltz
3 жыл бұрын
@@samsjunk1 I mean, true,
@someguy2352
3 жыл бұрын
@@wearddod7637 if it was then it would be too heavy
@austinroe780
3 жыл бұрын
I’ll admit, I was skeptical on how this would turn out but it looks even better than I imagined
@brian_did_something
3 жыл бұрын
The filmography and presentation of this series is off the charts. This project is amazing 👏
@albertknabe3713
3 жыл бұрын
"Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife"
@rionox5005
3 жыл бұрын
Why does it say you commented on This 2 weeks ago but the video came out an hour ago?
@Minionbro360
3 жыл бұрын
@@rionox5005 I have no idea, I am not a channel member so I can't access the video early
@coltennutt2499
3 жыл бұрын
@@albertknabe3713 omg stop commenting on every comment the same thing
@albertknabe3713
3 жыл бұрын
@@coltennutt2499 Instead of complaining, you could help...?
@Wolfencreek
3 жыл бұрын
You should sell that welding wrist mount, I bet there's a ton of Engineers who'd buy it.
@albertknabe3713
3 жыл бұрын
Dude...Ever heard of a "Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife" ???
@TheGetomaster
3 жыл бұрын
As a wise person once said " a grinder and paint will make you the welder you ain't "
@lucaswinsor4469
3 жыл бұрын
Dunno how wise that person was. If a weld isn't at least decent, no amount of grinding will fix that.
@brettenmorrell7754
3 жыл бұрын
Fax
@lucaswinsor4469
3 жыл бұрын
@@JasonEllins If you can't read a little goddamn sarcasm, get off the internet.
@lucaswinsor4469
3 жыл бұрын
@@JasonEllins If you're really that far up your own ass, it's no wonder.
@lukaswastaken8756
3 жыл бұрын
Did you really throw a brick on your head to test the helmet? Mad respect brother mad respect
@DarkoneplaysMC
3 жыл бұрын
As a welder myself, I appreciate the arm-mount thing you made
@thatautisticteen2491
3 жыл бұрын
Now this is what I call ridiculous, like how have so many people started watching this video already. It just goes to show awesome they all are
@bigbosspanda1976
3 жыл бұрын
Yeah so many people bought a membership to watch the mandalorian series early!
@Collin212
3 жыл бұрын
Actually it's because members get early access
@evanharline7110
3 жыл бұрын
Havent you ever watched mr beast?
@thatautisticteen2491
3 жыл бұрын
@@evanharline7110 I have but I don’t see the relevance
@bigbosspanda1976
3 жыл бұрын
@@thatautisticteen2491 neither do I I'm confused
@poopkiler2768
3 жыл бұрын
Imagine trying to rob these guys and you just see a fully suited up Mandalorian
@zacharietaylor275
3 жыл бұрын
A quote from the Ratchet and Clank VS Jak and Daxter Death Battle: Daxter: Um... Mercy? Ratchet: Uh, no.
@JesseDunbar09
3 жыл бұрын
That would be TERRIFYING
@stegosaurus993
3 жыл бұрын
"I can bring you in hot, or I can bring you in cold"
@Chase-jc7rx
3 жыл бұрын
Robber: I'm just gonna Walks into door face first I'm just gonna go see ya
@obiwankenobi6973
3 жыл бұрын
Hello there
@turtl5910
3 жыл бұрын
No one: James: “let’s start fabricating those cheeks”
@DaBeast34
3 жыл бұрын
10:34
@missmillion3864
3 жыл бұрын
@@DaBeast34 thank you.
@Kujer100
3 жыл бұрын
This is one of my the most favorite series by far... ❤️❤️
@LordofDiamondsMetal
3 жыл бұрын
for some reason the imagery and sound of Ian dropping a cinder block on James' head is uproariously funny to me
@tmbottegal
3 жыл бұрын
*CRACK* _tig-umph_
@iammandalore
3 жыл бұрын
"It wouldn't look as good as it does in the show anyways" The Armorer would like a word with you.
@Kornergrafen
3 жыл бұрын
I really think they dropped the ball with the finish they got, what a shame.
@rwflynt
3 жыл бұрын
Don’t make her angry. Remember her demonstration with the use of just her hammer and blacksmith tongs.
@grimmer-rd1mm
3 жыл бұрын
@@Kornergrafen that thing need a perfect shine.
@tristanemery8748
3 жыл бұрын
I was looking for this comment
@Arc_Troopa_Sam
3 жыл бұрын
Actually, Grogu's pod is a part of mando's suite, he presses buttons to make the pod follow Mando, close, and more
@miguelinnshall4358
3 жыл бұрын
nah it's not part of his suit he just linked it with star wars bluetooth
@marcuscavallo1166
3 жыл бұрын
The amount of happiness I get when I get the KZitem notification saying he made a new video
@wearddod7637
3 жыл бұрын
Nice you got it earlier
@rileymcmillin7321
3 жыл бұрын
IKR LOL
@benjaminhackett8896
3 жыл бұрын
You might be planning on doing this behind the scenes anyway, but I'd highly recommend putting padding in the helmet. Wouldn't be hard, and it would be more comfortable and stable. Original stormtrooper helmets had a clover shaped piece of foam, or you could get army surplus helmet padding. Anyways, looks awesome!
@thatshortbuskid9801
3 жыл бұрын
I think every one's appreciation for the armorer character just went up
@berryb.benson3604
3 жыл бұрын
You have got to give this guy some credit, he went from doing sfx for a toy light saber to making the first working plasma based light saber on earth
@SMBudge
3 жыл бұрын
Ya like jazz?
@hughjassFrom7YearsAgo
3 жыл бұрын
Ya like country?
@LuisMendoza-pp9qi
3 жыл бұрын
For the lightsaber he just bought a laminar flow nozzle on the internet and used blue plasma gas.... is not even that long is more like a knife than a saber!! No big deal
@DerpyPotato-cf8qh
3 жыл бұрын
@@LuisMendoza-pp9qi mmhm easy not hard at all, I did that when I was 5 years old, we learned it in kindergarten.
@holybananapeel3795
3 жыл бұрын
It's just like Tony Stark forging his MK1 suit, which is not a bad idea for a future armor build
@lifeuncovered6188
3 жыл бұрын
Ja, det et fedt. Og så det er ikke meget godt.
@SaintAJJ
3 жыл бұрын
He already has done the iron man helmet before, just not a full suit I think
@rodrigoponcecortes5193
3 жыл бұрын
@@lifeuncovered6188 is that norwegian?
@lifeuncovered6188
3 жыл бұрын
@@rodrigoponcecortes5193 Danish lol
@Shrektopuz
3 жыл бұрын
@@rodrigoponcecortes5193 He’s speaking the language of the gods
@Hyperscale_Gaming
3 жыл бұрын
If somebody tried to rob this man they would be literally running for they’re life
@eliasnilsson6604
3 жыл бұрын
Not as bad as Joerg but close.
@BoyMadeOfCardBoard
3 жыл бұрын
They havent been tested on living things
@splendiddwarf509
3 жыл бұрын
Their*
@pixellord1994
3 жыл бұрын
Lol
@RB-NZ2
3 жыл бұрын
Their* clown.
@picturebreakdown
3 жыл бұрын
Aww, I thought he was going to do a thermal screen on the inside like he did with the iron man helmet
@remusvang3622
3 жыл бұрын
Same
@remusvang3622
3 жыл бұрын
I WANT [ S•Ę•Х ] ••• Rita , 25 y.o ! Reply with ”Who’s joe” if you’re not a bot. Than I will click the link
@pjdianalan7934
3 жыл бұрын
Or the Predator helmet with image patterns, thermal, infrared, and UV.
@MrGoesBoom
3 жыл бұрын
the fact the visor from the prop fits so well shows how good a job you did on the dimensions of the helmet you fabricated. I always figured Mando/Trooper helmets had to have some sort of HUD display, with the various protrusions on the side being sensors. Pity adding something like that would likely be too big of a pain in the ass.
@ShinareAeruil
3 жыл бұрын
And this was the last time he revealed his face to any living being
@rita25y.o-checkmyvideo79
3 жыл бұрын
CBCV
@MeshJedi
3 жыл бұрын
not seen S2?
@ShinareAeruil
3 жыл бұрын
@@MeshJedi I have. But if he is more like the other mandalorians we have seen. The ones that died.
@theshadow5200
3 жыл бұрын
“When one chooses to walk the way of mandolor you are both Hunter and prey”
@yummybeeftaco
3 жыл бұрын
mandalore*
@theshadow5200
3 жыл бұрын
MyName AG kinda forgot how to spell it
@mandotheory
3 жыл бұрын
When one choses to walk the way of the Mandolore you become both hunter and prey. How can one be a coward when choses this path? -the Armor
@iansteinwallpennington429
3 жыл бұрын
Fun fact: Boba Fett first appeared not in The Empire Strikes Back, but rather in the Starwars holiday special in 1978
@technilaunch8353
3 жыл бұрын
Fun fact: YOU’RE A NERD No offense tho
@iansteinwallpennington429
3 жыл бұрын
@@technilaunch8353 "I know" Han Solo, The Empire Strikes Back, 1980
@strwberylemonade
3 жыл бұрын
@@iansteinwallpennington429 ily, you’re epic
@adminchobe
3 жыл бұрын
I know the scene wasn't actually publicly available until much later, but he did technically first appear in A New Hope, when Han is speaking to Jabba.
@potatospud9471
3 жыл бұрын
We dont talk about the holiday special
@cut--
3 жыл бұрын
Love that wrist mount ! My Dental Hygienist and the Dentist have these new chairs and arm rests so they're arms and wrists are completely founded on supports so they just use their hands and fingers.. in my mouth. It takes so much gravity off their bodies.
@atomicdestructor55
3 жыл бұрын
The Mandalorian is actually James. He's been fooling us all this time
@albertknabe3713
3 жыл бұрын
"Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife"
@BigCroca
3 жыл бұрын
hacksmith fans trying to figure out if james is iron man or the mandalorian
@Mysikrysa
3 жыл бұрын
James is basically a Mando armorer.
@TransForLife303
3 жыл бұрын
You didn’t know that
@shaziaanwar962
3 жыл бұрын
Plot Twist James is the mandalorian and iron man
@anonymusanonymus8012
3 жыл бұрын
The next video: Building a razor crest that flies and shoots
@connorw6335
3 жыл бұрын
James: at least the helmet works Also James: **concussion intensifies**
@AM-wv8nd
3 жыл бұрын
Haha He probably included a pad or a embed suspension inside the helmet. If not he must had a headache for weeks 😂
@-Jess.-
3 жыл бұрын
no myelin sheaths were shaved in the making of this video. It was prolly quite loud however, and likely unpleasant.
@MobiusKun
3 жыл бұрын
Found this channel when he was trying to fly with rockets tied to his arms. So cool to see where he's reached
@abelcole8578
3 жыл бұрын
,m
@depressedgwyndolin
3 жыл бұрын
They make a real F*CKING plasma based lightsaber
@ronanstephens1597
3 жыл бұрын
This channel is the love child of Mythbusters and Man At Arms: Reforged.
@Mr.Madman41
3 жыл бұрын
wasnt it lost child?
@mrkoolguy7424
3 жыл бұрын
I swear if James doesn’t build a razor crest and fly to fight the empire with his Star Wars stuff I’m gonna be mad
@quartz9704
3 жыл бұрын
But the razor crest got blown up but I mean still it’s pretty cool
@isaacrandomrussell5630
3 жыл бұрын
You mean the empire
@fingolfindamelkor6230
3 жыл бұрын
The Sponsor for this video today is NASA
@mrkoolguy7424
3 жыл бұрын
@@isaacrandomrussell5630 yes oop
@cozmicbot9442
3 жыл бұрын
Next series: We’re building the Razorcrest that actually flies
@rita-want-sex152
3 жыл бұрын
FVDFBFB
@xoland4586
3 жыл бұрын
after that they will build an imperial star destroyer and a fleet of tie fighters to recreate battles form the tv show
@sithis3838
3 жыл бұрын
Razorcrest
@itsmathematics7756
3 жыл бұрын
Half scale razercrest that actually works
@cozmicbot9442
3 жыл бұрын
@@itsmathematics7756 imagine
@DeadbeatGamer
3 жыл бұрын
Anti math people: "when will I ever use math"? Hacksmith: "its always been math"
@mateiporojan5438
3 жыл бұрын
Hacksmith in 10yrs: I made a full size starship in my workshop🚀
@OutSpector
3 жыл бұрын
Not YET
@cameronherrod7221
3 жыл бұрын
I mean to be fair they have made vehicles like the tesla and the power loader so they are slowly getting bigger 😂 cant wait to see what they get up to in the next 10 years
@amrastheluckywoof5524
3 жыл бұрын
Queue the X-wing build
@herokid789
3 жыл бұрын
But how would they get it out
@bIahaj
3 жыл бұрын
Hacksmith in 50000 yrs: We made a 1:1 scale Imperial Navy Kuat Drive Yards Heavy Warship Executor-class Super Star Dreadnought
@LostAkBozo
3 жыл бұрын
2025: Breaking news Hacksmith now has officially made the most powerful weapons facility, in other news dog and cat become best friends
@connorlane2062
3 жыл бұрын
Well, we need someone like him building amazing tech in America
@hellbusterdragon
3 жыл бұрын
The second news is pretty interesting
@Kasekuchen_LP
3 жыл бұрын
I’m so happy about that dog and cat thing
@mukund4926
3 жыл бұрын
It looks awesome. I showed this video to my father (who is an engineer) and he was very impressed. He called all of you "Real Engineers". Both of us can't wait for the next video in this series.
@MrGoesBoom
3 жыл бұрын
since they all have degrees in engineering I should hope they were real engineers
@mukund4926
3 жыл бұрын
@@MrGoesBoom there are many people who don't actually apply what they learn in college. They may have theoretical knowledge but they don't know how to make use of it practically. The hacksmith team, on the other hand, think outside the box and come up with creative ideas and build them.
@simplecraft7960
3 жыл бұрын
made a miniature helmet from brass for my channel and was planning to do a life sized one guess I don’t have to do that anymore. You really did a great job!
@fr2045
3 жыл бұрын
Ah, I've seen you stole my helmet from me give it back.
@kingfloridaman5274
3 жыл бұрын
No it’s his now
@bigbosspanda1976
3 жыл бұрын
No he made a new one you still have yours don't worry! :)
@albertknabe3713
3 жыл бұрын
Dude...Ever heard of a "Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife" ???
@roberine7241
3 жыл бұрын
@Albert Knabe what is That?
@ad-skyobsidion4267
3 жыл бұрын
@@albertknabe3713 how can something be a sword and also a knife
@magicman2265
3 жыл бұрын
Bro they need some cushion on that otherwise it’s going to hurt his head so much if he gets smacked 😭
@sournoodle7153
3 жыл бұрын
Grogu isn’t part of mandos armor,he’s part of mando 😊
@thedarkjw6219
3 жыл бұрын
Are you talking in the second person
@nogapres3007
3 жыл бұрын
He’s talking in third person
@intenzfrenzy7374
3 жыл бұрын
That Mandalorian helmet is amazing I can't wait to see what It looks like when it is done.
@redaze150
3 жыл бұрын
This is awesome! Can't wait to see baby yoda
@carinahelened
3 жыл бұрын
Me too, do you think they'll make a little robot or a puppet?
@DonaldRump.
3 жыл бұрын
@Obi-Wan Kenobi baby yoda ( ͡° ͜ʖ ͡°)
@andycrossgrove6574
3 жыл бұрын
"To design the replica helmet we will be using a replica helmet!"
@EliminatorGaming4697
3 жыл бұрын
Ah yes, the floor here is floor
@chrisprobablyananimator5082
3 жыл бұрын
I USED THE STONES TO DESTROY THE STONES
@cynrz0642
3 жыл бұрын
Use paper to make paper
@tpvn8377
3 жыл бұрын
I use the knife to sharpen the knife
@crazycattheboss
3 жыл бұрын
I used the iron to iron the iron.
@hypno_4049
3 жыл бұрын
this is beginning to become my favorite youtube channel
@capedcruis8er
3 жыл бұрын
Test the retractable saber on it see if it’s like real beskar.
@Mr.Engine993
3 жыл бұрын
"I am going to use duct tape..." Ah, yes, *THE SANCTUARY MATERIAL OF ENGINEERS*
@Average_furry-43
3 жыл бұрын
😂
@PhantomGato-v-
3 жыл бұрын
No. F L E X T A P E (No joke the stuff actually works)
@tazarbeast680
3 жыл бұрын
No one: Me vibing to the makeshift mando theme
@ninjafoxy8868
3 жыл бұрын
YES AND SEAL MANDALORIN
@legowildwolf146
3 жыл бұрын
4:05 just *casually* pulls out a *4ft by 4ft* piece of sheet metal *while wearing a Mandalorin helmet*
@bigbosspanda1976
3 жыл бұрын
Yes, that was in the video!
@ScottKenny1978
3 жыл бұрын
It's only 12ga steel. Roughly 7/64" thick, that entire sheet weighs about 70lbs. (2.5mm and 32kg for you metric folks)
@Byarb25
3 жыл бұрын
Me when he tilts up the helmet after he put the visor on: Yo that’s dope.
@idkanymore1298
3 жыл бұрын
The visor should be something like bulletproof glass.
@chrisbaker9704
3 жыл бұрын
Agreed
@bigbosspanda1976
3 жыл бұрын
Bulletproof glass isn't thin at all. Why do you think phones don't have bulletproof glass? Because bulletproof glass is really thick and heavy.
@idkanymore1298
3 жыл бұрын
@@bigbosspanda1976 It could be just reinforced glass or just normal glass.
@bigbosspanda1976
3 жыл бұрын
@@idkanymore1298 mabie something like gorrila glass used on phones. What are we on gorrila glass 9 or something?
@chrisbaker9704
3 жыл бұрын
@@bigbosspanda1976 fair. What about shatter resistant?
@passiveyak8419
3 жыл бұрын
One day they will create the whole functioning death star in one week.
@parsival
3 жыл бұрын
Waiting a week for a new video is really like waiting for the new episodes of Mando, and I'm just as excited for each new Chapter.
@thannydevitos2332
3 жыл бұрын
It really is incredible what you can do with sheet metal cutouts with plasma/laser/CNC cuts. Very impressed, was nervous with all those curves.
@JoshuaPritt
3 жыл бұрын
Maker ethos: "I made a thing that helps me make things easier."
@Soron661
3 жыл бұрын
doiiiiii!
@omttp0001
3 жыл бұрын
Literally got goosebumps while watching. You guys did a great job producing the helmet and editing.
@rylanjackson5278
3 жыл бұрын
this has got to be one of the best series on yt i have ever watched
@kennyb8269
3 жыл бұрын
When all the parts went together on the cad, it reminded me of making things in lego star wars games😂. Anyone else? 3:54
@young_bluezz
3 жыл бұрын
These are the type of guys u don't wanna fight I mean bruh they make things far more dangerous than a gun
@seansengpiel8156
3 жыл бұрын
None of there inventions are more dangerous than a gun.
@another3997
3 жыл бұрын
@@seansengpiel8156 That depends whether the gun is loaded. 😁
@hansbune3467
3 жыл бұрын
Dangerous but not as efficient
@diegokoch9917
3 жыл бұрын
This is how the mandalorian cult started. Then, people started joining, but their present was too overwhelming, so they decided to travel to the past and recreate star wars. Finally, somebody just travelled to the future and inspired George Lucas with the idea, so the loop could repeat.
@rafak686
3 жыл бұрын
Ever seen Dark Netflix?
@AltijdReno
3 жыл бұрын
@@rafak686 why is that relates? I havent seen dark, is it good?
@andreasreichhelm2523
3 жыл бұрын
I just wanted to say that this is the most BADASS KZitemr I know. Making actual weapons from fictional stories? Awesome
@poadstudios6000
3 жыл бұрын
Dam I can’t wait for all the armor to be put on I might actually become a member
@kaboomgaming4255
3 жыл бұрын
'armpit'
@poadstudios6000
3 жыл бұрын
@@kaboomgaming4255 lol I fixed it
@Milu2786
3 жыл бұрын
Goverment after watching this: Get me some of that Armour.
@dragonbornwerewolf
3 жыл бұрын
You should look up real life Mandolorian armor.
@chrisbjohngaming2626
3 жыл бұрын
Can we just appreciate, these legends, who make our dreams come true.
@SalmonPerson2000
3 жыл бұрын
Made* use correct Grammar also I agree they are awesome
@albertknabe3713
3 жыл бұрын
"Vibro-BLADE- DAMASCUS Steel Sword- Bread Knife"
@omg.virgil
3 жыл бұрын
@@SalmonPerson2000 please shut up
@crazyfriend50
3 жыл бұрын
@@omg.virgil why he is not wrong also seriously maked?!
@HSTLMLWL
3 жыл бұрын
@@omg.virgil What's wrong?
@owenm4336
3 жыл бұрын
Imagine instead of the stark industries hacksmith industries becomes a Droid factory producing star wars separtist troops
@jessicahoward8621
3 жыл бұрын
Or clones...
@captainriker9088
3 жыл бұрын
Always remember, the separatists were the good guys in the Star Wars universe
@BrendanCanavan
3 жыл бұрын
Honestly working there would be like a DREAM job for me. I love the idea of making stuff like this and I actually take an engineering class that teaches all the machining and stuff which I absolutely love. Keep up the incredible work man!
@tousiftabeeb645
3 жыл бұрын
imagine if he wore this with a jet pack, the flame thrower , the light saber and the cap shield while riding on the silver surf board.
@Devious_Incorporated
3 жыл бұрын
The TV show has ended but now we have the Hacksmith to keep the Mandolorian legacy going.
@joshplays1168
3 жыл бұрын
There doing a season 3.
@funguy123hs
3 жыл бұрын
Not ended its tbc, because the arc of mandalore homeworld and such
@yeahh2085
3 жыл бұрын
The mandalorian hasnt ended.
@zeke7972
3 жыл бұрын
Ended for now
@SimplyBad08
3 жыл бұрын
True
@thomasbohnert2876
3 жыл бұрын
All the sandblasting and welding on the helmet makes me think of being in the chair at the dentist... god help that helmet.
@haydengamingxx3211
3 жыл бұрын
I have been waiting since Mando season 1 for u to do this!
@potentialrez69
3 жыл бұрын
I love being a member and this stuff inspires me
@bradley8575
3 жыл бұрын
I like how the Mandalorian Mania is still ongoing after season 2 ending and that the next Season won't come until next year.
@violetwolfe1204
3 жыл бұрын
Can't wait to see the full armor!
@bigbosspanda1976
3 жыл бұрын
You can see it sooner if you become a member!
@braxtonstegall7013
3 жыл бұрын
With all of his inventions and weapons, he is an Avengers level threat
@clynxfn477
3 жыл бұрын
Give him 10 years and he’ll have the iron man suit
@Soron661
3 жыл бұрын
maybe one day. right now, he's just a Green Arrow only level threat.
@LuisMendoza-pp9qi
3 жыл бұрын
None of his projects is functional.. it's just for cosplay
@Soron661
3 жыл бұрын
@@LuisMendoza-pp9qi his blasters and other weapon tech are functional. One day, he may create a true jetpack.
@LuisMendoza-pp9qi
3 жыл бұрын
@@Soron661 NOPE, for true engineering work check out "Yves Rossi's Jet Wing" or "Mr. Zapata's Jet Board" or many other inventors out there.... Th Hacksmith are just cosplayers, they don't do anything functional
@bruno8a521
3 жыл бұрын
"this will benefit many foundlings"
@charlesmurphy1591
3 жыл бұрын
This is the way
@j-j-jingles4797
3 жыл бұрын
At this pace, you'll have a complete costume by Halloween.
@hacksmith
3 жыл бұрын
Nah one more month
@thehobolorian2038
3 жыл бұрын
if he came to my house wearing that, i would not only give him all my candy, but my house to.
@Shrektopuz
3 жыл бұрын
@@thehobolorian2038 is that some rich person joke I’m too peasant to understand
@thehobolorian2038
3 жыл бұрын
@@Shrektopuz nah. im just saying iif i had a house and he came wearing that i would. I F I HAD ONE.
@denderrant
3 жыл бұрын
"And then we can start fabricating those cheeks." "Let's see if we can make it fit. Now I just have a bunch of grinding to do." Good heavens, Mr. Hobson! 😳
@Nobody-ug5nv
3 жыл бұрын
You just don’t want to take it out of context
@Smithlady-33
3 жыл бұрын
“Now I may not look cool, but at least the helmet works” (clunk) (smash) “HA”
@BrownBoogieBear
3 жыл бұрын
I think you guys really brought cosplay to an other level....😳
@samerseif8932
3 жыл бұрын
No one: Absolutely no one: Hacksmiths: we made an infinity gauntlet that actually works!
@shelby255
3 жыл бұрын
What's ya age just curious
@samerseif8932
3 жыл бұрын
@@shelby255 1
@berkingurbuz1657
3 жыл бұрын
Been waiting all week, IT IS TIME.
@t3kscarecrow474
3 жыл бұрын
Does anyone remember when they said they were going to be making a complete Iron Man suit way-back-when.
@hacksmith
3 жыл бұрын
No I've never said that, it's always just been parts of the suit =)
Пікірлер: 4,1 М.