Do you have a different method that you prefer for flashing around a skylight? Drop a comment letting me know!
@christakisconstantinou1184
Жыл бұрын
😂wi
@toddthreess9624
Жыл бұрын
This video helped me a lot this past weekend. Whoever last worked on my roof, took ice and water shield and ran it OVER the flashing all around the skylight. No step flashing, nothing. just butted the IWS into the corner of the flashing, shingles over that and called it done. I had to clean it all up and your video was very helpful. I put in all new step flashing and made sure the flashing that came with the skylight pokes out under all the shingles. I did run the IWS under everything and 4" up the side of the skylight. Rained pretty well last night and no leaks.
@tonemeas6505
Жыл бұрын
Have the same problem,, its hard to find good people,, for the job,, happy you fix your 👍🏽👍🏽
@junehongreborn
9 ай бұрын
@roofrepairspecialist what would be the differences when doing a skylight in a 4 season climate area?
@santiagoperez4040
10 ай бұрын
Thank you very much for the information you shared. I used to install flashing on a Chimney for my wood fired Pizza Oven.
@RoofRepairSpecialist
10 ай бұрын
Nice, I’ll take a pizza as a thank you 😀
@tigerseye73
Жыл бұрын
Great info. I have 4 lites on my shop roof that will need to be replaced this next summer. I figured out most of the job, but your info is next level pro. Thanks much!
@RoofRepairSpecialist
Жыл бұрын
Glad to help
@pupdog7374
Жыл бұрын
What a great video! Your compete explanation was outstanding.
@RoofRepairSpecialist
Жыл бұрын
Thank you
@joseescobedo7080
10 ай бұрын
I learned something today. Thank you.
@RoofRepairSpecialist
9 ай бұрын
Glad to help
@iandeaner
Жыл бұрын
Wow, best video around, excellent explanation, amazing work. Real pro
@RoofRepairSpecialist
Жыл бұрын
I dont know about best, but we definitely try. Thanks you!
@paulmcwilliams6730
2 жыл бұрын
Nice job I was thought to cut shingles just a little back from light leaving small space
@RoofRepairSpecialist
2 жыл бұрын
That is a good practice. Something we usually do as well.
@LaFollias
2 жыл бұрын
Great lesson, clear and detail.
@RoofRepairSpecialist
2 жыл бұрын
Many thanks!
@gtcam723
Жыл бұрын
I’m watching this and really kind of want to put some sealant between the shingle and the step flashing because it’ll likely be months before the preapplied shingle adhesive is warm enough to stick.
@RoofRepairSpecialist
Жыл бұрын
I dont have experience in cold weather climates. Definitely would hurt.
@alibabaalibaba6785
10 ай бұрын
thanks
@RoofRepairSpecialist
10 ай бұрын
No problem
@patrickpeterman8736
Жыл бұрын
WOW !! GREAT VIDEO ; MUCHO GRATIAS AMIGO"!! I, 'LL REFER TO THIS VIDEO IN MY NEXT PROJECT "!!Patricio
@RoofRepairSpecialist
Жыл бұрын
Thanks again!
@luisserpas7255
11 ай бұрын
Beautiful
@RoofRepairSpecialist
11 ай бұрын
Thank you
@zzz7zzz9
2 жыл бұрын
the lower flashing, we call wall flashing, and we make sure it's the same colour as the step flashing, to match the colour of roofing. and what you are calling saddle flashing, we call back-pan, and also make sure it matches the colour of the step flashing.
@RoofRepairSpecialist
2 жыл бұрын
Are you guys able to find it pre painted? we have to paint it ourselves which is nowhere as good as a factory finish.
@zzz7zzz9
2 жыл бұрын
@@RoofRepairSpecialist ya, all the roofing suppliers stock it. All metal, step, wall, valley, backpans, etc, come in white, brown, black, grey. And i'm in canada, so surely the states has that too.
@look4wind
2 жыл бұрын
Thanks for detailed video!
@RoofRepairSpecialist
2 жыл бұрын
Glad it was helpful!
@evelynperez7576
Жыл бұрын
Nice
@RoofRepairSpecialist
Жыл бұрын
Thanks
@Mcv2023
Жыл бұрын
Do you have a video on skylight flashing for Empire ribbed metal roof?
@RoofRepairSpecialist
Жыл бұрын
No we don't work with any metal roofs. I would recommend looking elsewhere., I have seen some good videos out there on metal roofs.
@gregorykapanowski9540
Жыл бұрын
Why wouldnt you use the same color metal that you used for the step flashing that makes no sense. Plus you should put a counter flashing all the way around the skylight.
@RoofRepairSpecialist
Жыл бұрын
The other flashings don't come in the same pre finished color. I don't think counter flashing is necessary as long as the skylight comes on top of the step flashing. It wont hurt though.
@andygyultemiryan5198
Жыл бұрын
You better use right sheet metal cutters to cut your sheet metal.
@RoofRepairSpecialist
Жыл бұрын
As apposed to wrong ones?
@santiagogarcia8903
2 жыл бұрын
No ice & water 💦 no bueno !!
@RoofRepairSpecialist
2 жыл бұрын
We're in So Cal, not to much Ice around here. We only put in the valley's
@jonbradshaw3385
5 ай бұрын
This is the best video description of flashing a skylight I have found.
@RoofRepairSpecialist
5 ай бұрын
Wow, thanks!
@stumpynubs5387
Жыл бұрын
Is apron flashing aluminum or galvanized?
@RoofRepairSpecialist
Жыл бұрын
Galvanized
@stumpynubs5387
Жыл бұрын
aluminum or galvanized flashing ?
@RoofRepairSpecialist
Жыл бұрын
Galvanized
@rancherranger5948
9 ай бұрын
Wow great video, good presentation, is it the same installation for a concrete tile roof which I have and it leaks with heavy rain. Light rain it Doesn’t leak.
@foxwood67
Жыл бұрын
This is Southern California style roofing. Not acceptable in most wet climates. Be careful.
@RoofRepairSpecialist
Жыл бұрын
How do you guys do it?
@Deltaconcepts
Жыл бұрын
Yeah they have no comment. Trolls
@ShaneHolly
11 ай бұрын
lol.. that skylight was ready for gods next world drowning.
@sergiobalino836
11 ай бұрын
@@RoofRepairSpecialistadd ice and water shield underlayment around the penetration before the baby tins
@tonesmith909
5 ай бұрын
@@RoofRepairSpecialist Only one piece metal roofs in the rest of the entire United States 😂
@Nosweat99
7 ай бұрын
Loving your videos. Nice to see a professional in the roofing world. Keep on keeping on.
@RoofRepairSpecialist
7 ай бұрын
More to come!
@thepeterharrison123
3 ай бұрын
This was an incredibly informative video, thank you. Not sure if you are still responding to questions, but here's mine. For the saddle flashing, you cut it flush with the skylight box, leaving a small lip that extends past each end. Why do you cut out the excess piece instead of wrapping it around the skylight box? And if the purpose of the lip is to direct water away from the corner, why not have an angled lip instead of a uniform lip of what appears to be about 1 inch? Thank you.
@RoofRepairSpecialist
3 ай бұрын
Wrapping it would work, I like the idea, definitely doesn’t hurt. If I understand the second part correctly I think leaving it straight is better as you’re not trying to direct the water necessarily, you’re trying to keep the water away from the corner.
@humrod1852
3 ай бұрын
"For years to come"...I think 2 or 3 years would count as " for years to come". How come the Mexicans never talk? :) The ones with the scarred up knuckles!
@RoofRepairSpecialist
3 ай бұрын
👎
@brentfrank7012
5 ай бұрын
This is NOT how you should flash a skylight. This is exactly why skylights get a bad reputation for leaking. Don’t follow this example.
@RoofRepairSpecialist
5 ай бұрын
Why? Give some details on how you do it differently
@gerardor1979
7 ай бұрын
Thank you for these great tutorials. I'm curious to know how do you approach flashing on an already installed roof AC unit when replacing shingles? A video would be ideal since I am sure you've encountered a situation like that one.
@RoofRepairSpecialist
7 ай бұрын
All the time, but every AC unit is different and definitely presents its own challenges.
@asadadil8695
Жыл бұрын
5:18 the fourth nail that Marco is putting in the shingle near the framing is redundant because you will nail this area of the shingle anyway when you nail the upper edge of the step flashing there. the nails that will go through the step flashing, they will also go through that part of the shingle underneath them, so no need to nail the same location of the shingle twice
@RoofRepairSpecialist
Жыл бұрын
True, however I don't think it hurts, just definitely not needed. I have to say, I appreciate your attention to detail Asad.
@jwsliu
Ай бұрын
This is incredibly professional! Do you happen to know any roofers in Toronto with a similar level of expertise? Please email me if you have any recommendations. Thanks!
@RoofRepairSpecialist
Ай бұрын
No, unfortunately I don’t have any recommendations in Toronto
@GabrieLight
2 жыл бұрын
This is good. In your opinion, which material is better for the skylight frames? Aluminum or wood?!
@RoofRepairSpecialist
2 жыл бұрын
I think wood is easier to work with and if you do a proper job waterproofing it you wont have any issues with wood rotting.
@GabrieLight
2 жыл бұрын
@@RoofRepairSpecialist Thanks for reply, mate!
@ittech2254
11 ай бұрын
Should go all the way up the side of the wood 2x6 so the skylight will rest down over the flashing , not short of it.
@RoofRepairSpecialist
11 ай бұрын
Thats what I discuss and show the last step of the video
@cotswoldsafety5749
Жыл бұрын
You are a very good instructor. Very useful for us in DIY.
@RoofRepairSpecialist
Жыл бұрын
Glad it was helpful!
@mrjedmonds1
Жыл бұрын
“He’s actually using his tin snips right now to ahhhh….. to make a line”
@RoofRepairSpecialist
Жыл бұрын
?
@bevandashwood1030
Жыл бұрын
I like how the lips were left running past on the sides at the saddle o top and down at the bottom for water shed.
@RoofRepairSpecialist
Жыл бұрын
Ya, little details go a long way
@lalomora4828
6 ай бұрын
Thanks for creating such an informative video. I feel more confident about inspecting skylights after watching it. The video helped me understand flashing concepts that are important in my home inspection class.
@RoofRepairSpecialist
6 ай бұрын
Glad it was helpful!
@LO-cd7ze
2 жыл бұрын
Aren't the roofing shingle supposed to be staggered?
@RoofRepairSpecialist
2 жыл бұрын
Yes, most definitely. In this video we were just showing how to install the flashing around the skylight. You can watch our other video in the series, I show how to install and stagger shingles.
@joshuav4596
2 жыл бұрын
Yeah, not sure how much you all deal with snow where youre at, but we run Ice and water around the entire frame of the skylight to stop any need for sealant. Flash and roof everything and its done.
@RoofRepairSpecialist
2 жыл бұрын
We're in So Cal, no snow here. But in places that do get snow for sure Ice & Water Shield like your saying, I would still do sealant on top of that.
@joshuav4596
2 жыл бұрын
@@RoofRepairSpecialist yes, we always ran the 2300 geocel on top, sealed each of our fasteners as well for bullet proof installations. Ice out here can break through roofing up to 4 feet up the slope of the deck, which is why so much caution is taken during the job.
@MrTooTechnical
2 жыл бұрын
Great vid. Just one additional thing. Keep the shingles away from the step flashing by at least one inch. Thanks.
@RoofRepairSpecialist
2 жыл бұрын
Interesting, I was thinking about this the other day. I need to look into this detail. I am curious to see what manufacturer specs says on this. Thanks for the tip
@leeknighton5113
Жыл бұрын
No not an inch about a quarter inch.
@MrTooTechnical
Жыл бұрын
No. 1 inch.
@saulmartinez6498
Жыл бұрын
This was thorough. Very well done.
@RoofRepairSpecialist
Жыл бұрын
Thank you
@barbarahenn-pander5872
Жыл бұрын
Very informative. I also appreciate how graciously you hand tips, questions and even rather unpleasant comments! I live in the warmest part of Canada, and will check the codes for our area as you are in Sunny California! Thanks!!
@RoofRepairSpecialist
Жыл бұрын
Glad it was helpful, im happy to share what I know.
@Cozcacuauhtli
3 ай бұрын
👍👍👍👍👍👍👍👍👍
@TwoFacedTony
11 ай бұрын
Shouldn’t those shingles be staggered?
@RoofRepairSpecialist
11 ай бұрын
Yes, In this video I was just showing the step flashing install not shingle pattern
@michaelxie4652
4 ай бұрын
What about corrugated iron roof?
@RoofRepairSpecialist
4 ай бұрын
Don’t have much experience on those
@user-ox3wt4vn7l
3 ай бұрын
Exellent video thank you
@RoofRepairSpecialist
3 ай бұрын
Very welcome
@scampifrity
Жыл бұрын
This was very technical, a lot. I have to watch this 10 more times in order to grasp every step. I am new to this and I must say your videos are necessary to see before starting and immprovise.
@RoofRepairSpecialist
Жыл бұрын
Do your research and do it right the first time. Allot cheaper than easier than doing it again. I'm sure once you watch it a few times and maybe some other roofing and flashing videos it'll start making allot more sense. The basic concepts repeat with a few extra tips along the way.
@scampifrity
Жыл бұрын
@@RoofRepairSpecialist Thank you a lot! Watching this particular video is exactly what we are doing. We plan to install the window in may 2023 until then we gather all infos ( while we practice in small scale ).
@tj3688
3 ай бұрын
I watched this repeatedly to make sure I got it right. I had a leaking skylight that some goober built and had to remove the shingles and curbs they had put in to redo it properly. I think we're good now. Subscribed.
@RoofRepairSpecialist
3 ай бұрын
Love to hear that. Thanks for the subscribe
@DavidHeyman-m3g
Ай бұрын
Wonderful!
@RoofRepairSpecialist
Ай бұрын
Many thanks!
@mendoza59nm-76
7 ай бұрын
Very good guy’s
@RoofRepairSpecialist
7 ай бұрын
Thank you
@BaAllen7239
Жыл бұрын
I noticed new flashing kits are very expensive (I'm hoping to install 6 windows) but the sheet metal doesnt seem too complicated to cut to size and buy an inexpensive bender. Is there anything I'm missing if I were to go that route?
@RoofRepairSpecialist
Жыл бұрын
No, if you bend your own flashing that is totally fine. By us pre bent flashing is very cheap and easy to find.
@JesusSaves827
Жыл бұрын
Great video. Very professional. I’m trying to solve a problem with slight water leak from skylight. I think I sealed in the bottom of skylight with Karnak roofing sealer and now water can’t escape so it ends up leaking inside. What caulking did you use in this video.
@RoofRepairSpecialist
Жыл бұрын
We use ChemLink M1, however there are allot of great caulkings on the market. The correct flashing is far more important than the caulking.
@Deltaconcepts
Жыл бұрын
Thank you so much. I needed this and really appreciate it. I cannot afford to have a pro do work for me.
@RoofRepairSpecialist
Жыл бұрын
Glad it was helpful!
@misientotrieste1221
Жыл бұрын
this was a very comprehensive detailed tutorial, KUDOS , thank you for this
@RoofRepairSpecialist
Жыл бұрын
Glad it was helpful!
@jamesgreenmont
9 ай бұрын
Great video and wish there was a link to the cricket install you mentioned
@RoofRepairSpecialist
9 ай бұрын
Need to make a video on that.
@1973kbg
Жыл бұрын
Please share the link for how to install cricket on skylights
@RoofRepairSpecialist
Жыл бұрын
Don't have that yet. I will add that to my list.
@jonathanantheunus460
Жыл бұрын
Good skills, I learned a lot. Regards from Belgium.
@RoofRepairSpecialist
Жыл бұрын
Thank you
@onelung83
2 жыл бұрын
very good explanation on all the flashing steps. much appreciated!!
@RoofRepairSpecialist
2 жыл бұрын
You're welcome!
@fernandodelgadomayorga6182
Жыл бұрын
thank yoy. Lo mismo, pero para un techo de chapa ondulada?
@RoofRepairSpecialist
Жыл бұрын
No, different For sure.
@Sam-kn2mm
2 жыл бұрын
So how do I repair my skylight frame? Can I take just a few shingles off than replace them after I rebuild the frame?
@RoofRepairSpecialist
2 жыл бұрын
Not sure what you mean by frame. If you mean the curb replace the curb than follow the steps in this video to reflash.
@Sam-kn2mm
2 жыл бұрын
@@RoofRepairSpecialist Yeah i probably mean the curb, looks like (from the ground) the 2x4 is completely rotted away. Thanks, ill give it a try
@jacobsohn2761
Жыл бұрын
This was really helpful! Thank you.
@RoofRepairSpecialist
Жыл бұрын
Your welcome
@rogiervantilburg3440
10 ай бұрын
Thank you so much for sharing!
@RoofRepairSpecialist
10 ай бұрын
You bet!
@larrybell5144
Жыл бұрын
Excellent technique! Thank you!
@RoofRepairSpecialist
Жыл бұрын
You are so welcome!
@telosfd
2 жыл бұрын
Superb tutorial, thanks!
@RoofRepairSpecialist
2 жыл бұрын
You're welcome!
@aaronlauer8378
2 жыл бұрын
Thank you so much what a great video! Couple of questions if you have a chance. How do you fasten the curb to the roof? I was guessing it was toenailed but wasn’t sure. Also, if placing down roll flashing/ice and water shield, does it go over the roofing felt or under it? And finally, any tips for sealing off a tree growing through a roof penetration? Thanks again!
@RoofRepairSpecialist
2 жыл бұрын
Hey Aaron, I'll try to answer best as I can. Usually it's just toe nailed, sometimes simpson straps are used, 90degree brackets. The ice and water shield can go either way, generally we install it prior to underlayment. I believe that is what OC recommends. Lastly sealing around a growing tree; I have not done this, I have seen people use flexible EDPM flashing, its rolled flashing used on metal roofs.
@aaronlauer8378
2 жыл бұрын
Thanks so much. I really appreciate the help.
@robertbruce5084
4 ай бұрын
Excellent video.
@RoofRepairSpecialist
4 ай бұрын
Thank you
@2ndfl
6 ай бұрын
Very well presented !
@RoofRepairSpecialist
6 ай бұрын
Many thanks!
@michaelmendoza51
10 ай бұрын
Great video
@RoofRepairSpecialist
10 ай бұрын
Thanks!
@dmitry-3048
10 ай бұрын
Thank you
@RoofRepairSpecialist
10 ай бұрын
You're welcome
@stanleyshedd2643
2 жыл бұрын
Very helpful. Thanks
@RoofRepairSpecialist
2 жыл бұрын
Glad to hear it!
@clivebarry3301
Жыл бұрын
Look good 👍
@RoofRepairSpecialist
Жыл бұрын
Thank you!
@ezequieltorres3597
2 жыл бұрын
Es mejor aser los saraos soldar
@RoofRepairSpecialist
2 жыл бұрын
Ya
@paulmcwilliams6730
2 жыл бұрын
Great video
@RoofRepairSpecialist
2 жыл бұрын
Thanks!
@luislau2284
2 жыл бұрын
muchas gracias
@RoofRepairSpecialist
2 жыл бұрын
no problem
@georgecastillo6548
2 жыл бұрын
Thank you for good explanation and showing us to the video thank you again
Пікірлер: 166