Man this guy been in the grom game for a minute now put in some time I no I'm going to have some questions for him some my bike on its way I have watched his videos for a good minute now his grom got the most upgrade I've seen besides a motor swap he must of put everything that they came out with for performance some good stuff great at explaining things.👌✌️👍💯
@BLRTUNING
3 жыл бұрын
Just let me know when you get the bike buddy I also offer custom tuning and I created a two-step launch control that is a direct bolt on works with power Commander 5 I'm the only one that makes it. I've been tuning motorcycles for over 15 years... If you got questions you can reach out to me through the blr tuning Facebook page at the following link... m.facebook.com/BLRTUNING/
@liveforgreat
2 жыл бұрын
Nice video brother. I like to do it for my bike, can you tell me how to backfire with juken 5 ecu
@BLRTUNING
2 жыл бұрын
Tuning for this ECU requires the bike to be in person. We are located in Vancouver Washington
@Dahny
3 жыл бұрын
I just ordered mine on Facebook, waiting for it it ship. Do you need and wiring to make any of this work, or is is strictly plug and play for the 2 step/tuning?
@BLRTUNING
3 жыл бұрын
It's plug and Play and it doesn't really have a working two step unless of course you attach a speed control wire through the pins on the ecu. Just keep in mind this type of tuning device cannot be tuned via email or anything like that. You will be doing the tuning work on your own so you'll need to have a good understanding as to how everything works. There's not a ton of support out there for this device. It is a good device I like it personally. However with that being said that's only because I know how to tune the bike and I can do it myself or for any customers that are local to me. For better tech support and whatnot I prefer something like a power commander 5. However with that being said also everyone's going to have their own opinions. If you know what you're doing then this device will work just fine. Especially if you're just doing an exhaust and an intake. If you're going to start adding something like a cam or a Big bore kit you should be looking at a different tuning method..
@Dahny
3 жыл бұрын
@@BLRTUNING Awesome! I just have an intake/exhaust so I'm not doing anything crazy. As far as the flames go like the ones you had in the video, are you able to do that without the speed control wire? Like say if I want to rev the bike to 7k and have it shoot flames, or 10K so it shoots flames while Im hitting redline to shift, would that work? Thanks for the help/reply!
@BLRTUNING
3 жыл бұрын
@@Dahny kind of but it's not two step launch control that's just you choosing what RPM the bike shoots flames at
@Dahny
3 жыл бұрын
@@BLRTUNING okayy I see. So I can get the flames and pop’s while revving but I just can’t get a real true launch control at a certain speed?
@TheHonorr
2 жыл бұрын
How much do you charge for remote tuning. I have a grom with cam ported head chimera intake 150cc injectors and full ebay exhaust?
@BLRTUNING
2 жыл бұрын
If you could please message me through the blr tuning Facebook page we could chat more there and get pricing taken care of and a tune dialed in... m.facebook.com/BLRTUNING/ If you're unable to get a hold of me through the blr tuning Facebook page let me know and we'll figure out a different way to reach contact each other.
@arioch_sin2638
Жыл бұрын
I cant get my tuner to this point. I even purchased the $10 one in the app store. Still cant tune it in any way
@BLRTUNING
Жыл бұрын
Yes definitely takes a little bit of skill to adjust the fuel map and ignition timing and everything else. If it's not done correctly you can seriously damage the motor. We do offer custom tuning for this ECU but only in person. The ECU does not have a way for us to email a custom tune and you put it on there. We have to actually physically have the bike. IF YOU HAVE FURTHER QUESTIONS TAKE A LOOK AT OUR WEBSITE AND SCROLL ALL THE WAY DOWN TO THE BOTTOM. You'll see all of our contact information. www.blrtuning.co
@baddaystunts
2 жыл бұрын
Might be a kinda stupid question but I see you got the handbrake set up on the bike so I'm assuming you got a idle adjuster screw. If you do when you did the calibration did you just crank the idle screw down to stock? And what is the stock idle supposed to be at?
@BLRTUNING
2 жыл бұрын
Yes we made everything as stock as possible so we can get it to idle correctly before we make our adjustments when playing with the idle adjuster. Idle should be between 1400 and 1700 1700 would be kind of the high idle some bikes depending on the build are able to idle right around 1200 and sounds smooth
@Thaggard_is300
3 жыл бұрын
How are in engaging the 2-step? Are you using a sensor on the clutch lever or is it always on?
@BLRTUNING
2 жыл бұрын
It's kind of a trash setup it's always on
@BLRTUNING
2 жыл бұрын
Basically you have to turn it on from your smartphone and then when you are on the two step it will stay on until you hit about 10 miles an hour then it will come off you cannot engage it again until you turn it back on on the smartphone. So you have to have your smartphone available at the ready if you want to use the two step option... I'm not a fan
@nadieselgirl
3 жыл бұрын
Do you stock these? Or what do they run? Can you weld O2 bungs?
@BLRTUNING
3 жыл бұрын
I'm located in Vancouver Washington I do have a friend that can do the exhaust 02 bung as long as you know the placement of it and bring the pipe and drop it off... I do not stock the next stand ECU.. I believe they cost around $200 it's a fairly new ECU.. does ECU does not offer remote tuning which means it cannot be done through email. it can be tuned in person.. The system does not let you load up a aftermarket tune file like the Dynojet power Commander 5 would let you do .. It is significantly cheaper though so I guess you get what you pay for. It's not bad for the price... if you have any questions and you would like to chat please feel free to reach out to me through the blr tuning Facebook page at the following link. it's much easier talking through there than it is through a KZitem... m.facebook.com/BLRTUNING/
@jal187
3 жыл бұрын
You tuning on the free app or the paid version?
@BLRTUNING
3 жыл бұрын
Paid
@jal187
3 жыл бұрын
@@BLRTUNING thanks mine just came in yesterday. His Black Friday sale was too good to pass on $190 shipped.
@leohow2462
2 жыл бұрын
Are the backfiring options on the ECU bad for the bike?
@BLRTUNING
2 жыл бұрын
Probably
@tavarish7118
2 жыл бұрын
If you overdo it probably yes
@gagefowler1425
6 ай бұрын
I bought a grom with this ecu. It is stuck in anti theft mode and I have no clue how to get into it. It let me once…. But won’t let me again lol
@BLRTUNING
6 ай бұрын
Yeah this was a little video and put together but shortly after the video that like blew up because the ECU failed. Not what I consider a good product. Maybe for a stockbike it would be okay but if you're doing any serious build that involves putting some money into it this would not be the way to go.
@gagefowler1425
6 ай бұрын
@@BLRTUNING right. I put this ecu into a different grom. And it made the motor on that grom sound like it was knocking 😂 This ecu works okay, but sometimes it will go into eco/street mode and make it run horrible. The main thing is I’m not able to connect my phone to the ecu…. It will connect once like every 20 attempts. Getting pretty frustrated lol don’t know what I’m doin wrong
@BLRTUNING
6 ай бұрын
You're probably not doing anything wrong it's probably literally the ECU itself. I would ditch it and put the stock ECU back in and then go with something like a PC6 with a custom tune. I just feel like it's not worth the risk. You're risking the entire build on a $200 ECU. When you could go with something like a PC6, a custom tune, two-step launch control, quick shift, pod 300 digital display, wideband with autotune, there's tons of stuff that can plug into the PC6.. or you can run the PC6 by itself with a custom tune and you would be set. Also with the PC6 if you ever change parts we can just email you a new tune. We only charge $90 to build a new tune for any bike that we've already tuned before. With that ECU you're running we can't even tune it remotely... Feel free to check out the Honda Grom section on our website. www.blrtuning.co/collections/honda-grom-parts-accessories
@gsxrbilly2
2 жыл бұрын
Where can the ecm be bought? I've looked around but haven't gotten a legit answer
@BLRTUNING
2 жыл бұрын
Look up Keith Cantrell on Facebook he's the one that sells them here in the US
@tylerharper3222
3 жыл бұрын
Is there a way to change the actual idle?
@BLRTUNING
3 жыл бұрын
It doesn't necessarily have idle functionality in the ECU settings itself.. you can play around with the tip in and you can play around with the fuel at idle but you still need to adjust your idle air screw to get it to idle properly...
@grxxly6109
3 жыл бұрын
Where can I find this map
@BLRTUNING
3 жыл бұрын
I made it.. you can message me through Facebook messenger.. m.facebook.com/BLRTUNING/
Пікірлер: 38