This is my Segway x260 that I built up in this video( this is the talking version of this build, do have a fast paced one with no talking) #ext #warp9 #trillseekers #surron #segway
How does this video not have more views? Good work on the build, bet it rides like a dream!
@electric_things_
9 ай бұрын
Haha thank you I appreciate it!
@ss190ss5
9 ай бұрын
A masterpiece in every sense of the word .
@electric_things_
9 ай бұрын
Thank you 🙏
@DakotaGotHeat
9 ай бұрын
This was a dope build! I learned some new things from you🔥🔥🔥
@electric_things_
9 ай бұрын
Thank you, glade you got something out of it!⚡️🙏
@EDM-Jigger
Ай бұрын
That thing you took out, I'm pretty sure is your GPS tracker.
@Calthecool
6 ай бұрын
The converter that you didn’t know what it did is a DC to DC buck converter. Gas motorcycles have a 12 volt electrical system to run all the electronics (turn signals, headlights, blinkers etc). Some electric bikes have this converter to convert the battery voltage (50-67 volts in your case) down to 12 volts so that you can use generic motorcycle electric parts on your bike instead of having to buy specialty ones that work with higher voltages.
@electric_things_
6 ай бұрын
Aww that makes scenes and good to know! Figured it was converting something to make the main power work
@dabdout
7 ай бұрын
clicked off the quick one to hear you yapp brotha kep it up
@electric_things_
7 ай бұрын
Aye thanks brotha figured it would have been the opposite way around🔥
@CoolWatts
8 ай бұрын
I'm in the midst of doing the same thing - an 80v, 25kW frame-up build from scratch. Thanks for posting this and the shorter version, it's helpful.
@electric_things_
8 ай бұрын
That’s sounds like a fun build fs! Does 80v have better specs vs the 72v? And thank you glad it’s helpful in some way!
@CoolWatts
8 ай бұрын
@@electric_things_ as always, more volts = more fun!
@electric_things_
8 ай бұрын
@@CoolWattshaha sounds accurate!⚡️
@ThreeDPrintDesigns
6 ай бұрын
Great, Informative video!
@electric_things_
6 ай бұрын
Thank you!🙏
@DOBICONJT
9 ай бұрын
Please put links to all the parts in the description!
@opgas
5 ай бұрын
Warp9 is lookin good
@electric_things_
5 ай бұрын
Thank you🙏
@Sherman1862
9 күн бұрын
Looks so AWESOME!!! Nice Build, great Video!!! I just bought the ERide Pro SS 2.0. Ordered a 16 inch rear wheel with 60 tooth sprocket from Warp 9. Thinking that I should have ordered the 54 tooth one as the rear wheel goes from 19 to 16 inch... Do you think that a 60 tooth is too low for the gearing? I'm now afraid that it will be to witchy, hard to keep front wheel on the ground? anyway, interested in your thoughts with 54 toot rear sprocket. I'm not really interested in high speed so i want lots of low end for hill climbing and technical trails. Anyway, thank you! : )
@electric_things_
8 күн бұрын
@@Sherman1862 hey thank you I appreciate it🙏 I’d say you definitely did right thing with getting the 16inch rear rim it’s a night and day difference having that real dirt bike tire on their for trails and climbing fs! One of my best purchases was that but with looking at the specs on the eride it looks like that thing would be a torque machine out of the box😂 what size spocket is on their now? I feel like the 60 tooth would definitely make it super easy to bring that front end up witch would be fun on technical trails but might be easy to spin the tire out or pop the front end up on hill climbing but if your easy on the throttle you would grow into id think! I’m really liking my 54 tooth sporket but with my 6800 watts I’m pushing I have gotten to the point where I’m full throttling my trails and hillclimbs wishing I hade more top end speed but with your bike having more watts and top end out of the box I don’t think you’ll go wrong with either or!
@Maverick31535
3 ай бұрын
make sure you put the bump stops on the forks so they don't scratch against the frame
@electric_things_
3 ай бұрын
@@Maverick31535 definitely, mine didn’t come in the box but ext put them on when I took it to the shop cuz valve was ruined
@Maverick31535
3 ай бұрын
@@electric_things_ good because you don’t want to be spending that much money on forks to get them ruined right away.
@FlyingNimbuscloud
8 ай бұрын
gz on1k. well deserved
@electric_things_
8 ай бұрын
Aye thanks bro I appreciate it!🔥
@Throttle.Addict
4 ай бұрын
amazing build and super helpful! when are you going to upgrade the battery controller and motor?
@electric_things_
3 ай бұрын
Thank you glad it helps! I’m definitely thinking about it more but once I get a new battery I’ll have to get ride of the wrap and go with the color scheme I want but I like the wrap I want to soon though! I do have a razor mx650 I was going to do a 14kw kit build but might just finish the surron build instead now and trow the old surron parts in the razor
@miklu30
4 ай бұрын
can put the url of the products? pls
@shockadellick
2 ай бұрын
The LBX desperately needs a gear box.
@electric_things_
2 ай бұрын
@@shockadellick what are the some advantages on that? I was liking how simple it was to remove the chain but the gearbox looks nice
@shockadellick
2 ай бұрын
@@electric_things_ 1. reliability 2. less noisy 3. 100 x less service
@miklu30
4 ай бұрын
where did you bought the parts from?
@KumahzClipz
20 күн бұрын
broo you should of poweder coated your ron since you already had it disasembled
@electric_things_
12 күн бұрын
Yea I definitely agree, regret it a little but I only notice it on top of the swingarm but iv already smashed the guard plate so that’s one up side is I don’t have to worry about scratching it up scens it will look new when I finally do get the matching paint theme!
@Young937phoenix
9 ай бұрын
Should have got flat black frame spray paint and painted the frame so it looked new before doing all that.
@electric_things_
9 ай бұрын
Yea I was thinking about it, but I still have a couple things I need to buy for it and I want all my blacks and everything to match perfect! But now I don’t have to worry about scraping it up scene’s for round 2 everything will be painted to match and then it will be complete
@Quickfr1
Күн бұрын
It would look better with a odi plate not as wide bare and no wrap
@georgek5250
5 ай бұрын
You exhaust your viewers bro
@electric_things_
5 ай бұрын
Yea I’m workin on it!
@marrzie467
5 ай бұрын
Do you regret going with the 550lb spring?
@electric_things_
5 ай бұрын
I don’t haven’t messed with the adjustments to much but it’s been feeling great! I like my settings to be more stiff, but I think I went with that spring more because I have trailer for it
@realkidcarter
9 ай бұрын
no way u didnt powder coat the frame or paint it before you put it together tho
@electric_things_
9 ай бұрын
It’s true I did not🥲 haha round 2 she will get the matching paint theme
@TheCool335
8 ай бұрын
You spent almost 4K on parts and didn’t do power upgrades???
@electric_things_
8 ай бұрын
Yea the bike needed it,couldn’t even handle the stock power and broke most the parts I upgraded! Did add 2,000watts from my stock Segway power train + bigger sprocket that definitely noticeable on the low end torque
@marrzie467
5 ай бұрын
What do you think about the tusk stand? Pretty stable when jacked up high? Also what did you think after the first ride on the new forks on rough terrain? Were you blown away?
@electric_things_
5 ай бұрын
I’m really liking the tusk stand definitely a good purchase if you work on your bike definitely trust it when it’s jacked all the way up as long as the bike is tied down with 2 mounts! But yea first ride I was definitely impressed felt like a new bike went over rough terrain with ease👌
@marrzie467
5 ай бұрын
@@electric_things_ Awesome. Thanks man.
@shay_mx34
4 ай бұрын
What do you do for a living bro?😂
@duhbrody
4 ай бұрын
Where did you get the frame from
@electric_things_
4 ай бұрын
This was a complete Segwayx260 that I stripped down to the frame for this video!
@zanep.4018
8 ай бұрын
Can you drop a link for the stand you were using?
@electric_things_
8 ай бұрын
Yea I’ll go look for it! I just got it from Rocky Mountain atv think it was called the scissor lift
@jksjks555
9 ай бұрын
Where did you buy the wrap from?
@electric_things_
9 ай бұрын
I just got it on the warp 9 website!
@NLMB_Josh150
8 ай бұрын
Where did you get the frame from?
@electric_things_
8 ай бұрын
I actually hade this bike when it was complete, but the only place I know where you can get one is at surronshop!
@misterbean9200
6 ай бұрын
Ты лучше купи хороший комплект ключей для ремонта своего байка , и покрась его ))
@electric_things_
5 ай бұрын
What do you mean by good set do they make better aftermarket ones? Paint job definitely in the future👌
@misterbean9200
5 ай бұрын
@electric_things_ • 3 ч I mean, it would be nice to work with a good tool ) it's always nice to have good wrenches at hand, bro ❤
@phil.d6449
8 ай бұрын
Titanium bolts and stock control?
@electric_things_
8 ай бұрын
Not sure if I understand your question, but yes it has titanium bolts (lighter and stronger then stock + look cool) and no it’s technically not a stock controller for this bike. it was a 1200watt upgrade compared to my stock Segway controller!
@phil.d6449
8 ай бұрын
@@electric_things_ Thanks for the explanation! I'd definitely recommend prioritizing a new controller and battery - you're going to have a blast with the enhanced performance. Your rebuild was not only informative but also easy to follow. I've learned a lot from it. Keep up the great work!
@electric_things_
8 ай бұрын
@@phil.d6449thanks man I’m glad it’s helpful!I definitely agree with you on the power upgrades can’t wait to get them, definitely going to be the fastest thing I own!
@bigballa8220
5 ай бұрын
Great vid, how long did it take you to build it that day from start to finish?
@electric_things_
4 ай бұрын
Thank you! I’m not exactly sure it did take me longer because of filming but could be done in one session/day , but I think it took 2 hours to take it apart then I broke it down into 2 days around couple hours each so maybe around 10-12 hours I’d guess with filming!
@bigballa8220
4 ай бұрын
@@electric_things_ oh nice wassup, you got skills!! 💪
@samuraiscripts
4 ай бұрын
Where did u buy a frame?
@electric_things_
4 ай бұрын
This was a complete Segwayx260 that I built up but the only place I know you can get one is surronshop!
@samuraiscripts
4 ай бұрын
@@electric_things_ okay sure ima look at it later
@janask7
8 ай бұрын
Where did you buy that frame?
@electric_things_
8 ай бұрын
I hade this bike when it was complete. But the only place I know where you can get one is surronshop, I can get you a code to save some if end up getting one
Пікірлер: 74