I wish you all to have a Happy Easter! Take care and all the best!!! Dusan.
@sewellbgamer789
5 жыл бұрын
Ye boi
@darronhedges5873
5 жыл бұрын
It was between this kit and 'jugs over Italy' P47 by Eduard.This kit lost,and i'm regretting it already.And now im going watch and weep.Have you seen Rochm Models website.Brilliant attention to detail.Twice as good as Voyager,same price,and now they are starting aircraft sets.
@daniil.v5962
5 жыл бұрын
Do you speak german, if yes warum machen sie kein Model auf Deutsch? But nice model!
@m_0714
5 жыл бұрын
Please show us the final assembly as well i.e. the canopy, the wheels, etc.
@SmallSoldier
4 жыл бұрын
Ditto!
@johnboy384
5 жыл бұрын
When I was a kid these kits came with historical accuracy on the rudder. I do not condone the regime but I feel the aircraft do not look right without that marking. PC gone mad. Thanks for the video, lovely to watch your work.
@ronschlorff7089
5 жыл бұрын
Yes, history is history, the past is the past, and can't be changed, by anyone,.... for any reason!
@ScaleModelAircraft
5 жыл бұрын
Thank you!! There is swastika but it’s just blurred on the pictures for regional availability of the video due to the law in DE. All the best! Dusan.
@pneulancer
4 жыл бұрын
Acknowledging history is conflated with agreeing with or condoning it in the present world. Banning symbols or writings does not alter what happened. If the swastika is banned, the hammer and sickle of communist Russia should be as well. Far more people killed by Stalin than that knucklehead with the F'd up mustache.....Anyway, despite the Orwellian world we find ourselves in; the model looks great. Thanks for an informative video!
@asrigascanbe
4 жыл бұрын
dont want to offend the snowflakes
@manda60
4 жыл бұрын
@@asrigascanbe You sound triggered.
@ItsMotoMatt
14 күн бұрын
Hats off to Tamiya for SUNK PANEL LINES on every model!!!
@firstnamelastname1101
5 жыл бұрын
The engineering of the main landing gear to achieve the correct angle is long overdue. One of the many little things that set Tamiya apart from the rest. And as always, beautiful results.
@rothschildianum
Жыл бұрын
This can be the BEST building video. All steps were well thought and convey in a very straight forward without any talking whatsoever. I think all should emulate this video! Bravo!!
@dondecaire6534
4 жыл бұрын
Brought back memories of hours at a dining room table, getting glue stuck to everything including the model eventually. Well done!
@man_vs_life
5 жыл бұрын
Just about to get into modelling again after a, ahem 40 year hiatus. Loving all these build videos on YT. TY for sharing - great work and inspiring.
@Archangel_158
5 жыл бұрын
I think the Bf-109 was the best design of the time, both in appearance and function.
@BobMuir100
Жыл бұрын
Well that was a wonderful build, the time and care you took for a 1:72 was generous indeed! I know modellers who would treat such a model as an “……oh it will be OK….” as they will never display it anyway. I was dismissive off the size on my return however watching folk such as you build a 1:72 the intricate nature of the build has drawn me in. Anyway I am becoming convinced that ratios mean little to this industry. I don’t understand ratios so I may be wrong but I cannot accept that two aircraft in essence the same dimensions ens up on my worktop as totally different sizes yet are boxed 1:72!! And then SC-FI how can the model we make be a ratio of a craft that never existed??? I am confused. I wish Tamiya would ‘slip’ me some freebie tools! How many views did you need to have before they made contact? It’s OK no need to answer that. Great video, I did both “Like and Subscribe “ as requested and I shall watch you again. Bob England PS: how did your kit have Swastikas in it? Not in the EU I thought it said?! I think the kit needs them, not to honour the Nazi’s in anyway but it’s history and Germany nor the EU should attention alter the past.
Do not know what this means but I am thumbs uping it anyways. +1 :)
@AugustusCaesar88
5 жыл бұрын
Hi Dusan, a wonderful Tamiya Kit and absolutely beautiful build. I have built two of this Tamiya 109 kit (one of them Hartman’s G6) but in 1/48 scale. They are truly magnificent engineering aren’t they! I just wish Tamiya would add the fine riveting and beautiful surface details that Eduard add to their kits. I don’t understand why Tamiya choose to leave out the beautiful surface details that Eduard include. In my opinion the riveting detail adds soooo much character to plane models, I don’t care what people say about scale effect etc. the detail is beautiful and I think this is an area that Tamiya could improve on. They certainly have the capability to do it!
@ScaleModelAircraft
5 жыл бұрын
They might do that for future releases, who knows. Thank you very much Tom! All the best! Dusan
@antoinedutheil7280
Жыл бұрын
I like the absence of rivets on Tamiya kits. If I want them I grab an Eduard Kit, but loosing rivets when sanding some areas make me loose my mind !
Building this now. What a lovely kit, stunning detail and quite literally best fit I've ever seen. Main construction is complete and my files and putty have stayed unused. The only aftermarket you need is canopy masks, but only if you're lazy, maybe some seat belts though a decal is provided. I thought I'd built nice kits before but this is close to perfection, very recommended.
@abe6953
3 жыл бұрын
I'm about to get this get. My first tamiya 1/72 airplane. Love the kits they fit so well.
@danielburkett821
5 жыл бұрын
Tamiya seems to be out doing themselves with each new kit they release. If they're trying to match or surpass other kit manufacturers, they're doing pretty good so far! Excellent video. I'm trying to get back into the hobby after being away for quite a while, your video helped me make that decision!👍 Happy Easter!🐰
@darronhedges5873
5 жыл бұрын
Ryefield and Riich model's have some great engineering.Not the catologue Tamiya have,but a massive leap in accuracy and approach.
@glynchivers9519
5 жыл бұрын
Really great job as always, nice to see a clean plane, not over weathered, thanks for sharing.
@ronschlorff7089
5 жыл бұрын
I agree, I hate "over-weathered" models (except maybe armor, which I don't do), but contest judges love them, even demand them for awards. They should remember two important things. Ground crews had a lot of time to keep these planes neat and clean, and some pilots would demand it, or it would be their asses! And also they had a short "shelf-life" during wartime, the aircraft and the pilots who flew them measuring their lives in weeks or months, not years, for the average case!!
@tomasperezluis4606
4 жыл бұрын
Para ser una escala muy difícil de hacer,me gusta mucho. Buen trabajo
@kampase
4 жыл бұрын
Amazing to see how little difference there is in quality between the 1:72 scale and the 1:48 scale. Tamiya really are fantastic
@Dan-tv1sm
3 жыл бұрын
I really like the freehand camo without masking. Nice control with the airbrush. Thanks for posting.
@andrey3370
5 жыл бұрын
Люблю 72 масштаб))) Автор молодец. Уважение)))
@markkeeley2371
4 жыл бұрын
Wow..... My absolute favourite aircraft from WW2, you have amazing skill.
@thelegoww2builder192
4 жыл бұрын
I have this model but a different brand in my stash I really want to build it now after seeing this video plus amazing work on such a small scale model looks great!
@flaviokovacs5588
5 жыл бұрын
Parabéns pelo profissionalismo e destreza na construção do avião. Ficou uma réplica perfeita. Abraços do Brasil
@ChocolateBonBon-17y
Жыл бұрын
1
@Simon-sv6qe
5 жыл бұрын
The 17 dislikes are spitfires
@ronschlorff7089
5 жыл бұрын
or 1/32 builders!! :D
@thomasandersen5822
5 жыл бұрын
Or proponents of historical accuracy.
@jordyncollier919
4 жыл бұрын
Rivet Counters
@52down
3 жыл бұрын
I bet there are some Yaks among them too
@mode1charlie170
2 жыл бұрын
Or Eduard
@riff2072
5 жыл бұрын
DISCLAIMER: "I am not being paid to promote this kit, paints, tools and to make this video! Thanks!" Well, Tamiya should help you out for making their stuff look good and if they did, that would be Ok with me. Another job well done. Cheers mate.
@3Dprint4you
5 жыл бұрын
Riff not being paid but Tamiya provided everything. Regardless I’m jealous. Tamiya makes incredible kits and their paints, tools and pretty much everything else is spot on. They could spoil me anytime, I already pretty much own every tool, paint and aid they have but please feel free to ship some my way. 😉
@NorthernerInSpace
4 жыл бұрын
Really nice build! Thanks for sharing. You have got a very steady pair of hands!
@ScaleModelAircraft
4 жыл бұрын
Thanks for your kind words! All the best! Dusan
@afenijmeijer9027
5 жыл бұрын
Another fine model by the best plastic kit manufacturer in the world. Please do a 1/12 scale WSBK Kawasaki ZX10 RR Mr Tamiya.
@darronhedges5873
5 жыл бұрын
They are far from best.Look at Riich models 1\35 universal carrier £30 ,and Tamiya's.There range is there forte.But Dragon,Ryefield,and Zoukei mura are better engineered if more challenging.
@afenijmeijer9027
5 жыл бұрын
Never heard of Ritch and have have read reviews on Dragon and Zoukei Moura which are critical of their fit. You mention more challenging as well Tamiyas latest newsmotorcycle models have perfect fit as do their aircraft models. I stand by my comments. Thanks for your comments.
@darronhedges5873
5 жыл бұрын
Ive built about 20 Dragon model's nearly all armour,usually the more complex kits.Instructions are an issue,but fit,never.ZM tolerances in 1\48 are a pain,like WnWs,but in 1\32 are fine.I detail intensely,and use 'citadel air which is very thin.I usually use graphite from soft pencil's over matt black for engines,instead of metal paint,keep's tolerance low.Nigel did review RIICH universal carrier.Ive also built Tamiya,or did.If i built motorcycles Tamiya would be my go to.They even show you how to scratchbuild certain parts.The aircraft are good,but need PE upgrades for 'detailing' to the level i want.I have a lot of time,so building is my main focus,and lack of space limits painting time.So im not knocking Tamiya,just not saying that there as fantastic as some people claim.Since i was 11 ive forgotten how many Tamiya kits ive built.But when i returned to modelling i built 1\35 Cromwell and a Jagdpanzer L70,next kit was Dragon and never looked back.But im easily got by Metal barrel's and bits of wire and Photo etch.Just used cellophane as glass in Eduard 1\48 instument panel,looks just like glass.Good luck with the plastic.
@afenijmeijer9027
5 жыл бұрын
@@darronhedges5873 I have only built 3 tanks. All from Tamiya and found that adding photo etch did nothing to enhance their models. To me, their moulded detail is quite superb as is their fit. I have read some criticism from rivet counters on accuracy in some areas, but to me it is irrelevant and of no bother. The first one I built was their T34/76. Added Eduard photo etch and metal barrel. Decided the effort was not worth it. Did do metal tracks on this one and they are a definite and noticeable improvement over the kit tracks. You get realistic sag in the top run of the tracks. The other two kits were the Abrams M1A2 and the desertised Challenger 2. The M1 has a metal and resin barrel but again I feel the kit barrel looks every bit as good if assembled and painted properly . Started metal tracking the M1 but gave up because one does not see the top run of the tracks . Same comments apply to the Challenger but that one is OTB. Have not built any Dragon models. Just a further comment. I built Tamiya's 1/32 Spitfire Mk IXc a couple of years ago and that model is quite simply the best model I have ever built. I felt super detailing it was quite unnecessary the detail is so good. I build anything that takes my fancy and I suppose Tamiya's product range covers most of my needs, so, yes I am biased towards them. Anyway thanks for the comments and maybe I will have a go at one of Dragon's armour products. I fancy the Tiger or Panther...
@darronhedges5873
5 жыл бұрын
Each to thier own.I like hardcore dance music and Billy Holiday.Have a look at ROCHM model's website,you may see further into your future in modelling.I know what i like,and i like what i know......
@b.vhidalgo4817
3 жыл бұрын
Outstanding assembly and paintwork. Please more 1/72 scale models in the future
@FAITA2009
5 жыл бұрын
Excellent job . For next video, please consider in show how to build and install the antenna wires. For me this has been a difficult. Thank you.
@riff2072
5 жыл бұрын
Was thinking the same thing. Cheers.
@juannolasco1942
5 жыл бұрын
Have you ever consideres building an f1 car? Would love to see that!
@user-ii6vl2jf5l
5 жыл бұрын
Отличные инструменты + умелые руки = крутая модель. Душан, как всегда на высоте...👍👍👍
@sergiogamboa6472
5 жыл бұрын
No hay duda... Tamiya y tu.. Se complementan... Hacia la perfección... Hermoso modelo...
@bobdyer422
5 жыл бұрын
Great detail for 1/72, 1 piece tires{finally}, and decent decals. Beautiful job Dusan, another little gem. Just the right amount of weathering,and the decals laid down nicely for you. Happy Easter to you also!
@valtolhurst
5 жыл бұрын
Awesome model, impressive bit of airbrushing!
@3Dprint4you
5 жыл бұрын
Is it just me or does anyone else think this guys builds a lot like Plasmo? Both are masters and things just flow for them. Both masters of the airbrush.
@bobonajbolji
2 жыл бұрын
Bravo Dušane, jako lijep video, mislim na snimku samu po sebi…a maketa je vrhunska!
@timeseller2108
4 жыл бұрын
Top video. I’ve been looking for info on the gloss and Matt finishes, when to apply etc. You have just shown me exactly what I needed to know.
@lynetteschroeter6843
8 ай бұрын
Merry Christmas! What an artist you are to be able to air brush that camo free hand on a 1/72 scale model! Fantastic!
@jaycal1920
5 жыл бұрын
The flat glass with raised edge. Very fine sandpaper, very flat surface, light sand then paint a flat surface and rub the panel on painted surface. Doesnt work well with curved canopy although*** I used to apply glue to long straight edges same way. Paint glue on flat surface then run the edge flat towards the glue. very thin, even line applied to edge. Same with pin stripe edge. ***this works with canopy edge, the flat part of cylindrical canopy. Often the back edge. Hold canopy edge to flat surface and use as squeege on thin paint line on surface to transfer. Quick alternative to masking and airbrush and very perfect line applied.
@Osmosium2507
5 жыл бұрын
Sehr cool, dass du die Regensburger Version zeigst. Ich bin in der Gegend aufgewachsen, wo früher mal das Messerschmidt Gelände in Regensburg war.
@davidvonslingshot
5 жыл бұрын
I really prefer Tamiya to any other brand... kits, paints and tools they really are next level. Great build, as always
@ronschlorff7089
5 жыл бұрын
right, especially materials; best cement on the market!
@Jabba1625
4 жыл бұрын
Revell can be a bit disappointing but man the Zvezda SU-30SM 1/72 kit I'm building is seriously good kit, fits well together, I'm very impressed. Get the Russian Zvezda kits not the Italeri kits re boxed by Zvezda. Just got back into modelling after about 15 years and never really had kit that fits so well together
@MAN394631
5 жыл бұрын
Hallo Dusan, yes happy Easter too, youre ME 109 looks very fine, as always, even i am more in 1/48 scale, but i am here to praise your work not the scale. Cheers from Germany
@RaiquenCastillo
5 жыл бұрын
Muy bueno! Saludos desde Argentina Buenos Aires!
@jimbo3221
5 жыл бұрын
NICE! 20 Minutes of pure joy 😁👌🏿I'm building my eurofighter ghost tiger right now and the decals are quite a challenge! But this video motivates me
@ScaleModelAircraft
5 жыл бұрын
Nice to hear that!! Thank you! All the best! Dusan.
@RetroDan16
4 жыл бұрын
Thanks for this, I've just bought this kit which will be my first Tamiya kit ever! Looks amazing and I can't wait to get airbrushing!
@JeffreyStrader
5 жыл бұрын
Dusan your ability to edit your videos is Excellent!
@gpaje
5 жыл бұрын
Your videos are so well done, so well presented and filmed, than you so much for creating and posting.
@riff2072
5 жыл бұрын
He does make them easy to watch. Be seeing you, gpage.
@ScaleModelAircraft
5 жыл бұрын
Thank you very much for kind words! Dusan
@aussiefrenchman-hobbytable9960
5 жыл бұрын
forgot how fun these kits are ,lot more fun than building a battleship lol great work!
@nightrider6599
4 жыл бұрын
Very good building ! Thx 4 this video + greatings from Hämburg,Germany,Dusan!^^
@書いても基本返信見ません
5 жыл бұрын
上手いなぁ~❗
@kiannlot
3 жыл бұрын
my favorite part of finishing a model is the moment you pull out the rest of the decal sheet
@TheWGLOVER
4 жыл бұрын
You have a very steady hand.
@terrytewell5507
5 жыл бұрын
Thank goodness someone finally released an me 109 model
@pauls5981
5 жыл бұрын
beautiful
@brendanwm
5 жыл бұрын
I remember when my hands didn't shake like a palsy victim *sigh* 😅 Incredible, Dusan, thank you.
@LarsKazubski
3 жыл бұрын
Nice work, mate.
@slackjaw703
5 жыл бұрын
Looks like the new airbrush works quite well. I must keep getting defective ones though, no matter the manufacturer, because my paint jobs never turn out nearly as good as yours do. Lol. Great job once again!
@ronschlorff7089
5 жыл бұрын
Right, Very impressive paint work! And he shows off by doing it all left-handed too!! LOL :D
@the135germanmodeler9
5 жыл бұрын
Beautiful work! Great video. Thank you!
@paulselti3317
5 жыл бұрын
Hallo Dusan! Einfach weltklasse was Du da machst!!!! Schöne Ostern!!!
Wow, very nice tiny kit of a tiny aircraft! Almost makes me want to build one,.... but naw, I prefer 1/48 for WWII aircraft, but have done many WWI a/c in 1/72,... two seaters and bombers of the era!! Beautiful build though!!
@ScaleModelAircraft
5 жыл бұрын
Thank you! All the best! Dusan
@DavidRamirez-ww5kv
5 жыл бұрын
Great build Victor! This is the first build I have seen from your channel.
@fleetwarrior75
5 жыл бұрын
Another masterpiece Dusan! 👏🏻
@thesmugone4126
5 жыл бұрын
You should try the new one that was released a little over a year ago. It is a very nice kit.
@iryairya2008
5 жыл бұрын
I love your work and your presentation!
@ScaleModelAircraft
5 жыл бұрын
Thank you! Dusan
@JedenSiedemDwa
5 жыл бұрын
Great done! And it is definitely little great kit! I hope they make other G's variants. ;) Thanks for video, Happy Easter for You and for all! ;)
@gruppenfuhrer45
5 жыл бұрын
Great job and awesome paint job sir
@diver4333
5 жыл бұрын
Perfect!
@SmallSoldier
4 жыл бұрын
Very nice Dusan! I have the 48th scale version and hope to build that on my channel in the future. Great stuff as usual! Cheers.
Una pregunta con que material pegas las piezas a los paliyos de madera con plastilina ????
@joshuajames2832
5 жыл бұрын
Wonderful work - your videos really help me expand my skills. Have you considered building the 1/48 scale F-111C from Academy? It's one of the best kits I've ever done
@ScaleModelAircraft
5 жыл бұрын
Thank you!! I have Hasegawa kit in 72nd scale. Haven’t looked into Academy (also Italeri-rebox) Will consider, F-111 is a beautiful bird. All the best! Dusan
@albertofrancioni8972
2 жыл бұрын
hello congratulations for your work ... I wanted to know where I can buy the seat belt kit in 1/72 and 1/48 scale for WWII model aircraft. ? Thank you
@acerock013
5 жыл бұрын
Do you cut the canopy masks by hand? I always have a hard time doing this.
@ScaleModelAircraft
5 жыл бұрын
Yes and no, depending of the frames visibility. For some kits I am using that method and for some I cut thin stripes of masking tape (0,5mm) and cover the clear parts for each window/hatch... all the best! Dusan
@JackFlemingFan1
5 жыл бұрын
Thank you Dusan for posting another excellent video of another excellent aircraft model built by you!
@knoppenbrock7282
5 жыл бұрын
Happy Easter too, Dusan. Thx for the great built.
@aerocraftrc
4 жыл бұрын
AMAZING
@DD-ye9bb
5 жыл бұрын
Very beautiful, must have taking you days, good job on your build man
@duckman5642
5 жыл бұрын
Art.
@harryhaller7025
5 жыл бұрын
Perfect
@messer1096
4 жыл бұрын
What paint did you use for the rlm 74 and 75? Did you thin the Tamiya paint with Lacquer thinner? Thanks!
@francescotorri8401
2 жыл бұрын
Thanks for doing it
@jedin3756
4 жыл бұрын
Are you sponsored by Tamiya? Nothing wrong with that but I like to know. As always a great video!
Пікірлер: 284