PTFE Teflon Tape is not the correct product for fuel line thread. Diesel will eat it and it can get in your fuel. The Yellow Gas version is for NG/LP gas not liquid fuel rated, so don't use that either. Use Permatex which comes in a variety of types for anything that act like a solvent or fuel. Otherwise yes, and I use quick connects on hoses and valves to kill each side of my filters, pumps, X & Y connectors for duel and aux tanks to flip'em out without fuel, or other dumping all over. Good suggestion. $20 filter or $1500 injectors, yea, no brainer.Recommend change them regularly, cut them open and see what's up on every change. . .
@ProjectTimeGarage
10 ай бұрын
Great info. Thanks!!
@Mikepalmer6
8 ай бұрын
Just finished up this mod on my 99 f250. Thank you for the awesome detailed video. I appreciate all the content you put out.
@ProjectTimeGarage
8 ай бұрын
Cool, glad to h elp!
@azrios
8 ай бұрын
In addition, I installed a tee between the fuel pump and the filter you installed. 1/8 copper line up to a vacuum gauge in the cab to let me know when it’s time to replace the filter.
@ProjectTimeGarage
8 ай бұрын
Ok, now that's good idea!
@shayoneill
6 ай бұрын
i did the same thing, works like a charm.
@mcleanuniform22
11 ай бұрын
Cheap and efficient. Love it.
@ProjectTimeGarage
11 ай бұрын
Thanks!
@kevinmurphy3464
9 ай бұрын
Clean fuel and clean oil will ensure 500,000 plus miles on that motor.
@ProjectTimeGarage
9 ай бұрын
That's my thinking too.
@johncraig406
11 ай бұрын
My '02 7.3L Excursion has had a Wix24006 prefilter on it for many years, it used to be a Fire Chief's battalion car.... the hoses on it are well into their "old age" obviously, and to the NaySayers that a 10 Micron filter is bad, that filter has lots of Surface Area, it has not been a problem, ever. I will replace it with the Water Drain version next time. We "Discovered" the 24006 fuel filter when we installed the Fuel Sump, and intended to install a Racor Marine glass type fuel filter with drain.... phooey on that, the Wix is already there.
@ProjectTimeGarage
11 ай бұрын
It should be all the filtration we'll ever need.
@pauldampier9681
11 ай бұрын
Honestly that’s just cheap insurance
@ProjectTimeGarage
11 ай бұрын
Yeah, that's my thinking too.
@Yukonjackman1
11 ай бұрын
I run a filter on my radiator cooler system also.
@ProjectTimeGarage
11 ай бұрын
Yeah, I think i'm going to do a video on that too.
@zupcompany
6 ай бұрын
What are your thoughts on adding a Cat 1R-0750 fuel instead of a water separator. Do you think there would be an issues there or is the WIX 33405 the ideal filter for this application
@ProjectTimeGarage
6 ай бұрын
Should be fine.
@harrypersaud9422
11 ай бұрын
Great video sir
@ProjectTimeGarage
11 ай бұрын
Thanks!
@egochecker
7 ай бұрын
I just bought a e350 220k miles. I just changed the fuel filter it had 1/2 of junk in the bottom of the res.
@ProjectTimeGarage
6 ай бұрын
Yeah, that's pretty common. This filter will fix that.
@TheMoparGarage
11 ай бұрын
The more filtration the better! If it wasn’t, FASS, Airdog, etc. systems wouldn’t have 2 filters.
@ProjectTimeGarage
11 ай бұрын
My thinking too!
@michaelminer2008
11 ай бұрын
Where did u get the idi shirt at.
@ProjectTimeGarage
11 ай бұрын
They are my own creation.Check my KZitem store. I have them available.
@JLCmike4014
11 ай бұрын
Guess that’ll be one of the next modifications to do on my ‘99 F-350. That and also a coolant filter system. Just a tip, put some grease on the filter o-ring so it seals better and also makes the filter come off easy the next time you go to change it.
@ProjectTimeGarage
11 ай бұрын
Nice, easy mod. Cheap insurance too!
@richardbarkley9909
11 ай бұрын
Really should completely remove the in-tank screens with the installation of the spin on filter.
@ProjectTimeGarage
11 ай бұрын
Previously done
@silvergrizzly316
11 ай бұрын
Looks good 👍 I'll bring my 2000 F350 7.3l by tomorrow for this mod😄
@ProjectTimeGarage
11 ай бұрын
LOL
@mattdarst6485
7 ай бұрын
Did you use 3/8 ID hose?
@ProjectTimeGarage
6 ай бұрын
I think it was.
@deewinn1842
6 ай бұрын
What fuel line hose did you use?
@ProjectTimeGarage
5 ай бұрын
Just some 3/8 fuel hose I had in stock.
@jmstew642
9 ай бұрын
What the inside diameter of the hoses used?
@ProjectTimeGarage
9 ай бұрын
3/8" I believe
@todell7008
11 ай бұрын
Great point about larger farm equipment (and commercial trucks) utilizing dual filtration. And the fact that it's biblical? Well, psshh! Who can argue?
@ProjectTimeGarage
11 ай бұрын
Yep, right up there with "Thou shalt not have dirty fuel".
@jeffreypinder9398
11 ай бұрын
Great addition and instruction...and thank you for relocating the Emer Brake cable above the filter housing.
@ProjectTimeGarage
11 ай бұрын
Yeah, it was bugging me.
@jeffreypinder9398
11 ай бұрын
@@ProjectTimeGarage 😉
@pablorosales6457
8 ай бұрын
How’s it holding up?! Any leaks, or issues due to the inline filter?
@ProjectTimeGarage
8 ай бұрын
No problems. I've done this to all my diesel equipment. My other truck has about 100K miles on it since doing this.
@indiancreekfarms3011
11 ай бұрын
I want to do that to my 2011 f250 6.7 and my 2002 f350 7.3
@ProjectTimeGarage
11 ай бұрын
Easy modification for sure.
@mmcdonald9072
11 ай бұрын
Good idea for my 01 f350 . Gotta love them 7.3's
@ProjectTimeGarage
11 ай бұрын
Right on
@codybose515
11 ай бұрын
Do you happen to know what size of hose you used? Id rather find it before i have fuel dumping and try to shove the wrong size hose over it😂
@ProjectTimeGarage
11 ай бұрын
Maybe 3/8? I think that's what I used. I have a "big box of hose ends" that I dug it out of.
@codybose515
11 ай бұрын
@@ProjectTimeGarage thanks !
@RaizARukis
8 ай бұрын
3/8" hose*
@RaizARukis
8 ай бұрын
How many feet of hose did you use?
@ProjectTimeGarage
8 ай бұрын
Not much, less than 3' I'd guess.
@davidlampe4153
11 ай бұрын
Nice video thank you for your work.
@ProjectTimeGarage
11 ай бұрын
Thanks!
@mrbmd710
11 ай бұрын
Looks good what size bolts did you use to hold the filter base on to the frame?
@ProjectTimeGarage
11 ай бұрын
"bout that big" 😂 Honestly, I dug through the Big Bolt Box and found some mismatched junk from another project. 5/16 and a washer will work fine.
@mrbmd710
11 ай бұрын
Cool thx !@@ProjectTimeGarage
@robertmartin442
11 ай бұрын
awesome video
@ProjectTimeGarage
11 ай бұрын
Thanks for the visit
@HugieMaceachern
11 ай бұрын
Id use shorter filter
@ProjectTimeGarage
11 ай бұрын
Which filter do you recommend?
@RaizARukis
8 ай бұрын
The bigger the better! LoL more flow, less restriction.
Пікірлер: 66