ABOUT THAT INSTRUCTION MANUAL: 插入電源線並等待設備達到安全工作溫度後連接燈絲。🤔😂
@richwater296
27 күн бұрын
@@Zodlinessseriously its always chinese
@jankoodziej877
15 күн бұрын
@@richwater296 they are always machine translated nowadays.
@richwater296
15 күн бұрын
@@jankoodziej877 and the translation is garbage
@AaronBittenbender
13 күн бұрын
Didn’t he say it didn’t come with one?
@janpetersen8441
Ай бұрын
I bought a role of silicon tubing on Amazon. Snip of a little bit of tubing, shove the two filaments in there and heat with a heatgun Takes a little practice, but works really well, and is super cheap.
@axelofficial0fficial332
Ай бұрын
on the clamp on you should use some baking paper, there may be some minor imperfections, but it makes it far more usable than just shoving it in, also for the clamp I recommend making a tool to line up both filaments. I know it's not how it was intended to be used however we learned 3d printing to make our lives easier, rigth?
@raloed.363
26 күн бұрын
This reminds me of the fusers they use to connect fiber optic cables.
@MegaTechno
15 күн бұрын
Same
@bojangles5226
15 күн бұрын
Yup
@Dann.y
Ай бұрын
"I probably should let this cool down all the way but I'm curious so im gonna open it now" Probably the reason why the other filament splicers didn't work for you
@TOT3m1c
Ай бұрын
The second model you show works much better than that for me. Read some tips online about pushing the ends in a bit while it's warm, then let it cool before removing. Two little wings to trim and otherwise perfect.
@TinTalon
21 күн бұрын
Maybe this has been mentioned before but i thought the Sunlu fuser had a PTFE cutter built into in the back under the lid (where the melt zone lid is but above that) hope that makes since. I saw a video of someone else using it. You just set it in there and close the lid and it will score the tube. Then just open the lid, pull out the filament and peel of the tube. I am excited to received my Sunlu filament connector. Thanks for making this video.
@devilmaycryevil4
21 күн бұрын
It was also demonstrated near the end of the video 6:56
@TinTalon
21 күн бұрын
@@devilmaycryevil4 wow. I don’t know how I missed that. Thanks and sorry.
@boodoo3668
27 күн бұрын
You have talent to Complain in different way😂
@RayLenses
Ай бұрын
So informative And direct to the point!
@Zodliness
Ай бұрын
If he's trying to personify 'wilful ignorance' - Congrats! Ya fucking nailed it. 😂
@rachaelb9164
17 күн бұрын
Had you read the manual or watched a video on this you would know the cutting function is to cut the plastic tube off.
@neoney
3 күн бұрын
He literally used it for that at the end of the video lol
@Ahzahail
13 күн бұрын
I know the instruction manual on that last one says to cut the filament at a 45-degree angle to give more surface area to fuse.
@dragonheadthing
Ай бұрын
A very useful product! Good testing with pulling the pieces. Just wonder where to get the tubes once they run out, or if the company stops supporting the product. (But why was filmed in vertical video?)
@soundspark
13 күн бұрын
Might be 1.8 ID x 2.2 OD tubing.
@MO-ProMaxDesign
29 күн бұрын
Just another kid that gets it for free for doing a yt review and no idea how it works. But hey ik got it for free 🤓
@TheOfficialOriginalChad
14 күн бұрын
He said it’s not a review, did not mention it’s sponsored, and didn’t share a link…and you come to this conclusion, how exactly?
@Andyah
Ай бұрын
ihope u look at the manual now :P
@MisterkeTube
Ай бұрын
RTFM! This is just embarrassing ...
@derekchristensen3003
Ай бұрын
What is the outer diameter of the PTFE tubing? Just trying to figure out where a person could buy a larger roll of the PTFE at a lower cost than Sunlu is asking for a small amount of PTFE pieces.
@fraserskomorowski2311
Ай бұрын
Likely want to get some " 13 AWG PTFE light walled tubing ". 13 AWG is 1.68 mm dia. The tubing should be about 0.005" thick.
@peterkn2
Ай бұрын
I wanted to like this video, but I don't think it did the product justice. You pointed out multiple times that you didn't read the manual, ok, so why are we watching someone stumble through the product and use it wrong? You should have stopped, read the manual, and then explained the product to us at least after you tried it. For example, that slot near the top that you said, "did nothing," is there to cut the sleeve after melting.
@LeeMooEez
Ай бұрын
Second this! I’m frustrated LOL…
@LewisO.
Ай бұрын
Pretty gooood
@user-bx7ow7wy8o
Ай бұрын
Thats really neat 👍
@pbft.j
25 күн бұрын
You gotta disclose that they sent this to you, it's considered a sponsorship even if no money exchanged hands. It's still something of value. Imagine if Ferrari gave you a free Ferrari lol, then you're like "What do you mean #ad? Ferrari didn't pay me a dollar!" 😅 That's still something of value and legally you MUST disclose that.
@MitchDavis2
25 күн бұрын
@@pbft.j 8:00 in the video is the disclosure
@pbft.j
25 күн бұрын
@@MitchDavis2 Say it earlier in the video. To avoid people putting stuff like that 8 minutes in is why the law states it in the language it does. FTC Ad Disclosure Rules: "Ensure disclosures are clear and conspicuous, easy to see and understand." "Place disclosures close to endorsements."
@Marvinzock34
19 күн бұрын
Bro read thr manual please 😅 the knife is probably for the tube to cut
@TheOfficialOriginalChad
14 күн бұрын
Now how would the tube cut the knife? He used it to cut the tube, which seems to make way more sense.
@Treekicker
13 күн бұрын
Girl watch the fucking video. Lol😅
@Buildonsound
18 күн бұрын
RTFM jesus christ dude….
@amoslevi6075
Ай бұрын
2:32 the razor blade is to cut the white straws
@jayzazu
27 күн бұрын
Slunaz had been around longer and does a lot better. Their machine fully automates the process
@DanSlotea
15 күн бұрын
Yeah, and is 300€, while Sunlu's is 33€, one set of 200 tubes included.😂😂
@jayzazu
15 күн бұрын
@@DanSlotea so much for saving resources when you waste teflon
@DanSlotea
15 күн бұрын
Still 10 times cheaper 😂😂 No matter what you say, paying 10 times the price is still 10 times more expensive. And should you care so much, ptfe is fully recyclable. I don't, so...
@gaerekxenos
13 күн бұрын
It depends heavily on the scale of your operation. If you don't have a heavy 3D print farm operation, you probably won't be doing quite as many prints to warrant doing hundreds of joints, so the cheaper one is considerably more cost effective and less resource intensive. If you do thousands of prints with a fairly large size farm, then you might consider the larger and more expensive device to help the process along. Most general consumers only need something basic and simple, so the cheaper device that does a good job is better
@JDFisher
28 күн бұрын
Do you have a link to purchase the Sunlu?
@franeklubi
Ай бұрын
Yo that's good
@TechieSewing
Ай бұрын
Thanks, the first review i watched that compared it to other models. Could you try to reuse an uncut sleeve? I have watched 5 videos now, and manual readers didn't even try to slide it off, and went straight to cutting ;) But I wonder if it shrinks or something.
@MitchDavis2
Ай бұрын
@@TechieSewing it didn’t shrink, but it got more flimsy. Definitely reusable once, but anything more than that and you might start getting crinkles in your filament
@TechieSewing
Ай бұрын
@@MitchDavis2 Thanks, it's good to know.
@Archivort
Ай бұрын
Interesting! :V
@chrisguo5698
Ай бұрын
can just use those small tube plus a regular solder hot air gun to fuse
@freddyma
21 күн бұрын
RTFM
@rickrat
Ай бұрын
Link to this product?
@TomaszStachewicz
Ай бұрын
sunlu fc01. it's on preorder, youtubers probably got review samples before general public can buy.
@rickrat
Ай бұрын
@@TomaszStachewicz thank you!
@JacquesMattelaer
Ай бұрын
Just the sleeves and a candle flame may do the trick, no?
@TomaszStachewicz
Ай бұрын
@@JacquesMattelaer tight tinfoil wrap and heat, there are tutorials, sure. but the wrapping takes some time and temperature control is very nice because you don't want to liquifu the filament.
@DanSlotea
15 күн бұрын
@@JacquesMattelaerbetter with hot air
@dosdont
Ай бұрын
Nothing more annoying than portrait videos.
@jpbutron3839
14 күн бұрын
nice talent "complain" and "not reading a manual" and "complain again"
Пікірлер: 67