The Thicken Cut is genius - I would never have thought that this existed, let alone find a way to use it! You really are very creative - thanks for sharing all your knowledge.
@Fusion360School
3 жыл бұрын
It is very counterintuitive, especially with the name "thicken".😀
@Tonicwine999
2 жыл бұрын
I love fusion 360 but have always felt fusion was a little bit limited and flat till I found this guy
@TotallyFred
3 жыл бұрын
Hands down the most useful, practical, focused channel about Fusion. Each video is a gem. Thank you.
@rbyt2010
3 жыл бұрын
Thicken/CUT - never occurred to me. Thanks!
@gorgonbert
3 жыл бұрын
Brilliant!
@Tokolist
3 жыл бұрын
yeah, cool trick! this is exactly why I absolutely love this channel!
@medyk3D
3 жыл бұрын
Thicken cut - this is why I watch your videos, not only I just learned how to use surrogate emboss I learned also this handy little trick. Thanks 👍
@joepasqua1751
3 жыл бұрын
Another very instructive video. Thank you. Nice tip about using thicken-cut to avoid all the extraneous bodies.
@dittilio
2 жыл бұрын
Showing WHY you do things, especially with that emboss "failure" clip, is one of the best things about your channel. Really shows how rigorous you are.
@Ricky32908
Жыл бұрын
You’re a genius!!!! I’ve been battling this emboss trying to make a honeycomb pattern on some beautiful curved custom pens and couldn’t get it to work, you sir deserve credit for the surrogate emboss
@Tonicwine999
2 жыл бұрын
Really hope Autodesk are watching this to see the weird and wacky ways you have to go about doing an emboss like this. Although it is great the work they have done so far with their emboss feature it’s still so far in its infancy. Great tutorial as always.
@Fusion360School
2 жыл бұрын
I will cut Autodesk some slack here. Solidworks has the same problem with their wrap tool. I think the technical term is that this will only work on a developable surface. I am not sure whether this is a geometry limitation or a software limitation.
@WMBayouLures
3 жыл бұрын
Sweet! Thanks for doing this, I hope to put it to good use soon. Maybe one day emboss will be able to handle multiple curves and solve all our problems.
@Ricky32908
Жыл бұрын
If only Emboss could easily wrap a complex plane, it would make my job SUPER EASY
@Fusion360School
Жыл бұрын
This is apparently in the works. But Autodesk has been saying that for a while now, so.......😄
@zencow
3 жыл бұрын
That Thicken+Cut is clever. I think would have tried to do it with Combine:Intersect with a solid body, as I used similar techniques with OpenSCAD.
@boonjabby
Жыл бұрын
That, my fine sir, in an incredible workaround for the limitation of the emboss command!
@hazynpeterson4083
Жыл бұрын
ya, this guy is great,,,no dilly dallying ...and clear.good technique and fluid
@The_Real_Chris
3 жыл бұрын
I bet the guys at Autodesk are taking notes.
@VinayVarsani
3 жыл бұрын
I really hope so!
@marcotronic
3 жыл бұрын
Thanks a lot. I have probably never used anything in the Surface tab before 🙂
@Fusion360School
3 жыл бұрын
Once you use it, you can't imagine not having it.😀
@Energetic_Ballistic_Solutions
4 ай бұрын
I'll try this later
@3dconceptsofutah757
2 жыл бұрын
Thank you for your creative modeling videos! Very helpful for one who has feared surface modeling for most of my life ;-D
@WPGinfo
2 жыл бұрын
That is a really clever solution, Thank You!
@ianschutt6242
3 жыл бұрын
Very clear, well explained and easy to follow thank you!
@PirateWasHere
2 жыл бұрын
IQ 1000 !! Really thank you for sharing this 🚀🚀
@generalsirc2615
2 жыл бұрын
this was exactly what i needed thank you sooooo much!
@kspec2001
Жыл бұрын
this is a great video! thanks for sharing
@stefanguiton
3 жыл бұрын
Very Clever!
@toinevanderwielen9508
3 жыл бұрын
Great video and very well explained. Thanks!
@JuanAdam12
3 жыл бұрын
Genius content. Thank you, once again.
@brandonsummers6360
3 жыл бұрын
so smart dude thank you
@pistolao_vr
Жыл бұрын
Oh man you saved me! Thank you so much!
@Fusion360School
Жыл бұрын
Do note that there is a recent update to allow for embossing on complex faces. Perhaps you can try that first. In some cases, it will still distort the profile. If that happens, this method can be an alternative.
@Vanastarr
3 жыл бұрын
Great video.
@Daaell
3 жыл бұрын
Amazing tutorial, thanks
@michaels3003
3 жыл бұрын
The first comment today. Very impressive. A "MUST WATCH" video. 👍👍
@fouadelshafey502
3 жыл бұрын
Great video . thanks alot
@modernDEsignwithFusion360
3 жыл бұрын
Really great video! Your skills are top-notch!
@WWalleYY
3 жыл бұрын
Great stuff, thanks!
@RixtronixLAB
3 жыл бұрын
Nice video, thanks :)
@smithwesson4010
2 жыл бұрын
Круто. Лайк, подписка!
@mohamedalrayesmrunlocker910
18 күн бұрын
stuck the profile would not be able to select them
@elektronstorm
2 жыл бұрын
Hi, can you do an example of knurling on pistol handle?
@Tarex_
3 жыл бұрын
Any chance for a video on modeling from reference pictures? I have parts here with compound curves and complex curves, but setting up the references is a pain, even with a ruler in each photo, the sizes are all over the place even with the calibrate option
@Fusion360School
3 жыл бұрын
I did a video on this some time ago. Not sure if this helps you. kzitem.info/news/bejne/uqaLzaKfk2eCoqg
@PaulBHartzog
2 жыл бұрын
So IS there a way in Fusion to have an actually accurate pattern on a surface that is non-planar in more than one direction? I have plenty of curved surfaces that I need to pattern components and/or features onto, and I don't know if Fusion can even do it. :-/
@Fusion360School
2 жыл бұрын
I have not tried this yet but it might be possible to use the sheet metal function for this. Of course, it would be a lot more involved. You can refer to this video to get a sense of how this can be done. kzitem.info/news/bejne/2pyAqK1vsaKifG0
@WWalleYY
3 жыл бұрын
One question though, lets say I want it to cut into the bottle, what would I have to do then? Just this, but then in reverse?
@Fusion360School
3 жыл бұрын
When I saw your question, the first thought that came to my mind was to use the deboss option in emboss. But it quickly became apparent that it was not going to be that easy. I am in the middle of preparing a follow-up video to show this. Thank you for the question!
@WWalleYY
3 жыл бұрын
@@Fusion360School amazing! Thank you so much :)
@Cicada-uv5se
2 жыл бұрын
Your very good at modeling in fusion 360! Would you be able to help me model something?
@chinchan9
2 жыл бұрын
I keep getting Error: new ef_int outside edge on embossing :( anyone got a solution?
@Fusion360School
2 жыл бұрын
Hi, during my testing, I would sometimes get this error too. I would suggest that you try to slightly adjust the pattern. This can be done either by adjusting the size of the diamond or the spacing.
Пікірлер: 57