Hej Lars. I do hope that everything Is fine with you and what ever you do :). I have to admit I really miss your video's and the way you teach us all is really Great. U R a Special teacher, so I do hope that you find some new idea's to make some video's about, for I am shore there are many of us who are waiting for it ....:)
@wasdnc4132
2 жыл бұрын
Hope Lars is well, was never a watch ever video type of follower but his videos often helped me when I was in A bind. We miss you bud.
@makingtechsense126
2 жыл бұрын
Hello Lars. I was so excited to find such a wonderful Fusion360 channel on KZitem only to be saddened that you have stepped away from it to focus on other things. I do understand that your personal life and family come first. I do want to make sure that you know you are a gifted teacher and instructor, and that your videos are immensely informative and fantastically presented. I will be watching the catalog over the next few months as I learn Fusion360 and will be sad when I reach the end. I hope you are doing well and living life to its fullest.
@johnpaulstez
2 жыл бұрын
Lars, your the best Fusion instructor on the internet, bar none! Thank you for your time and effort, please continue!!
@chrismadill4185
2 жыл бұрын
Thank you for years of professional and personal mentorship on this powerful software. You make it simple for the learner. Imagine a world where a 3d modeling course was required (or encouraged) at the High School level. There would be "greater happiness" for all. While you have a large body of work I am looking forward to more of your wonderful instruction.
@mdproductions5416
3 жыл бұрын
Lars you are a prodigy and a real legend. You are what I call a sculpt master! Thank you for helping me by providing such useful and entertaining videos. Definitely earned a like and a new subscriber!
@ve2tax
3 жыл бұрын
That was amazing Lars! I’m a hobbyist learning the ropes with Fusion and without those types of good videos, I would be lost at sea!!!
@The.MrFish
3 жыл бұрын
Where have you been Lars!!! It’s quite the break between videos.
@krallopian
3 жыл бұрын
I have no need to click on this individual videos, but I'm watching all of yours and you NAIL the whole, "tutorial" thing lars, THANK you! I learn so many tips and tricks and the overall "ethos" of Fusion 360 because of your ability to explain things top down to their root! Thank you, so much!
@JackMoskowitz
3 жыл бұрын
Thanks for this. I'm a weekend woodworker who can't afford the paid version. This lets me make my cutlists for my projects.
@johngeoffroy
2 жыл бұрын
we need you back!
@gbleasdell
3 жыл бұрын
That litle "redefine sketch plane" command was something I never knew existed and will use frequently. Thanks for pointing it out.
@learnitalready
5 ай бұрын
Hello Lars! Great job with your valuable instruction. You have helped me and so many others to learn many fine aspects of this amazing software. Congratulations on your success with your channel too. You clearly understand the ins-and-outs of Fusion and explain things in a way that others understand. Thank you!
@cadcamstuff
5 ай бұрын
Thank you so much for the kind words
@carrilhola
3 жыл бұрын
I have a personal license, so learning how to make do for manufacturing was a big help!
@papabravo21
3 жыл бұрын
Thanks Lars! This was immensely useful for us hobbyists! Looking forward to more F360 content.
@michaelprior7459
3 жыл бұрын
Lars, your Fusion videos are super useful, I very much appreciate them!
@3dservicesllc
3 жыл бұрын
Hey, Its been awhile since I watched your channel. It turns out Ive gotten reasonably decent at fusion.. I have a firm grasp on the basics and its all because of your help. So thanks man, I really appreciate it.
@rameshnum
3 жыл бұрын
Hi Lars, you have been doing amazing work, really a fan of your tutorials, seen all. Hoping to see how to wrap a carving around a cylinderical surface. For example, designing a carving on cabriole leg. Hope I explained it right. Thanks a lot for all your hard work!
@jmegawarne
3 жыл бұрын
Love your channel, Lars. Hope you are OK - I was shocked at your weight loss!
@johnblackwell5805
3 жыл бұрын
I was worried too, but I just checked his website (updated July 2021) and says he’s on sabbatical until September and taking a break from his social channels etc. Hope you’re well and enjoying a well deserved break Lars! All the best. 😃
@alanferrell9406
3 жыл бұрын
This is just what I needed Lars, thank you so much for this and for your years of videos I can keep referring back to. I want to try a little CNC machine just for myself, so how to do this without the paid version was a big help!
@PhilipKownslar
Жыл бұрын
You are great, Lars. I have only just discovered you and I hope you're enjoying your time with Autodesk, with the software and company. I have leaned a lot from you. Thank you for making awesome content. :)
@mr02081989
3 жыл бұрын
Hey Lars thanks for the video! Very useful as a woodworker that often builds furniture using panels that I cut either on the table saw or the cnc router. Either way this layout part (or cutlist) is very necessary! Having the free version, i think I'll use the align mode for small projects only and stick to the specific cutlist softwares for bigger projects. I'll lose time typing the dimensions into another soft but I'll save much more sparing myself the positionning optimization of the boards.
@nemesis851_
2 жыл бұрын
Reviewed the ABOUT here on KZitem, then your personal website URL. Thanks for letting us know you’re good, while MIA on YT 👍
@mtnton1
3 жыл бұрын
Lars, you're one of my favorite KZitem teachers. Thank you for all of you're extremely valuable content. I have one suggestion, if I may. I struggle with being able to see your screen. I think it would be very beneficial if you zoomed in on the area where your mouse is. Also, making your picture larger while cutting out the areas that are not of interest helps us see what you're teaching us and talking about. I found another great KZitemr yesterday who does this very well. His screen name is Fusion 360 School. If you look at his videos, you'll see what I'm talking about. I don't need to stand 3 feet from my big screen TV to read the things he's selecting with his mouse. I truly love you're content and appreciate you so much. This is just my constructive criticism to help add even more value to your exceptional channel. Thank you sincerely.
@cadcamstuff
3 жыл бұрын
Yes, Fusion 360 school, does a fantastic job with his videos. I'm a big fan!!
@danbrown4205
10 ай бұрын
That was a very useful video. I primarily plasma cut and the arrange function alone is worth moving from the personal to paid version. Thanks!
@brett8090
3 жыл бұрын
Lars you are looking so healthy. Good job. Thanks for the video
@meltonpieman959
3 жыл бұрын
Great video, thanks for keeping us hobbyists in the loop!
@laurawerner
3 жыл бұрын
Nice video! I hoped you find the time to start making them again at some point. I've been learning Fusion over the last few weeks, and your videos are the best resource I've found. The manual method you showed at the end is very similar to the way I did "cut sheets" for my sheet goods woodworking projects in SketchUp before switching to Fusion. Using Arrange is so much easier that I paid for a subscription a few days ago just so I could use it. After all, I'm switching from SketchUp for the extra power that Fusion provides, and I'm willing to pay a bit for that. (I understand that not all hobbyists can afford to, though. I'm fairly fortunate.)
@chappycole5372
3 жыл бұрын
I am running version 2.0.9854 on my MacBook Pro. Arrange is listed in the Design preferences just as you showed it; however, when I am in the Design workspace and I select Modify>Arrange, the Arrange item is grayed out and if I attempt to click on it, I am told that I don't have that feature because I have the free version of 360. Is this a recent change? Since January '21 - the date on your video.
@hansplantenga396
3 жыл бұрын
Thank you Lars for the video. Your videos finaly help me to start to get an understanding of Fusion 360. Also because the audio is of excellent quality. Love your Danish accent, don't Americanise to much: we all know the metric system makes more sense! So I started off watching 'a simple wooden box...' but I couldn't find the right buttons and nearly gave up! Now I only watch recent videos because Fusion has changed so much since the update. More or less since you lost some weight.;) Must be the 'ølcrise'. Anyway: mange takk & hadde bra.
@coopshopdesigns4890
3 жыл бұрын
You are loosing weight... hope you are ok Thank you so much for taking the time to make us smarter!!
@starcam22
3 жыл бұрын
Arrange tool without component rotation and bulk selection for 2D contour machining is for woodworking only 10% usable. I don't know any wood without grain :(
@davidfinlay8274
3 жыл бұрын
you can use the align tool the different is you can use it in parts and componen ts. the other just in components. for the avance user. good job lar love your work yes i know you are trying to keep it simpel and that very good keep up the great work..
@aearles7
3 жыл бұрын
Dear Lars, thank you very much for your fantastic content. Unfortunately I am very much a beginner and am unable to really follow the more complex tasks. I have watched (and played along at home) you Absolute Beginner videos, but then took a break for a couple of years and forgot everything. Now, as you know, Fusion 360 has changed quite a lot and I don’t know where to begin. I don’t know if you take requests, but it would be brilliant if you could do another beginner series where we can follow along. Thanks!
@AlexEhn
3 жыл бұрын
Great video! Much appricaited to show how to do it in personal version. Will save me frustrations and create better User experience for me towards Autodesk and F360.
@KlausMichaelKMS
3 жыл бұрын
Great overview of the different ways on how to arrange Stuff. Thanks.
@ekremtok1192
3 жыл бұрын
Great explanation, thank you so much Mr. Christensen.
@Gshmerlin
3 жыл бұрын
HEY on your video the shelf that you use for example when you use the "arrange "command it lay and fit exactly one sheet but when my part bigger then on shit it make me error note ...I would like to know why the program not make argement and crate a new sheet ?
@havardwa
3 жыл бұрын
Thanks for all your super videos Lars. You have learned me a lot about Fusion 360. Anyway I tried the arrange function now from the personal version and get the message that its required to have the paid version to use this.. Have they changed this function the last days?
@ravijavia8183
3 жыл бұрын
Arrange is only available in Student, Start-up, and Paid subscriptions. It is not available in 'Fusion 360 for Personal Use'.
@theCombinator
3 жыл бұрын
Lars, hope you doing ok. It's been quite a while now. Awaiting your response.
@cadcamstuff
3 жыл бұрын
Thank you for writing! Yes, I'm taking a long sabbatical from video making. My day job at Autodesk is taking much of my video creating time.
@theCombinator
3 жыл бұрын
@@cadcamstuff i see and understand, good to hear you are alive! I the meantime you made enough content that's still valid and It's still nice to follow your video's. Learned a lot. If you ever feel like doing some updates then you know you got a crowd. All the best.
@elijahcbr6009
3 жыл бұрын
Just in time! I was struggling with nesting yesterday. thanks so much
@skoods1
3 жыл бұрын
Brilliant! (As always) Thanks, Lars !
@DamienDavidO
10 ай бұрын
Where have you been brother ? Miss your content
@jasonnorman7409
2 жыл бұрын
Life changing video
@divingrob
3 жыл бұрын
Another brilliant one.
@DJ9ZJ
3 жыл бұрын
Lars as always, great Tutorial, Thank you very much for showing!!
@billcampbell6857
3 жыл бұрын
Good content and only a few days late. :D I just finished modelling a bed frame and this could have modelled all my cuts for board length instead of me doing it in my head. Small project so I did fine, but in a more complicated model this definitely has its place.
@frasermacdonald5760
3 жыл бұрын
Great video - >I learn something new every time. Thanks Lars
@spannerman4886
3 жыл бұрын
Lars I'm retired and new to Fusion. I've just discovered your channel and so grateful for the work you've put into these videos. I've just designed and built my own CNC and starting out(maybe a little late in life?). I'm struggling to design a guitar neck, there are loads of videos out there but none who describe the processes like you have done. Obviously using shortcuts and keyboard tricks that aren't visible on the videos. And you help out with any tips please? Best regards
@MrRayd81
3 жыл бұрын
Lars, you are the best! Thanks and greetings from switzerland!
@PureAdvicePT
Жыл бұрын
Simply great... as always. Thank you
@stevegroen8036
3 жыл бұрын
I have a Personal license and Arrange is only available if you have a subscription! I confirmed this with Autodesk and none of the Arrange features are enabled without a $495/yr subscription. So I suggest you show how to layout a flat-pack box and toolpath without using Arrange, please.
@bennylloyd-willner9667
3 жыл бұрын
@5:44 he tells us just that, take a look at @28:22 where he shows us the Personal Edition way by aligning instead.
@jimmyfavereau
3 жыл бұрын
who is this guy? is that you Lars :D congrats on slimming down and thanks for the tutorial my friend.. Be Blessed !
@TylerHarney
3 жыл бұрын
16:37 I see the flipping option but can we rotate a component, say if we are lining everything up with a grain direction?
@CARLOSMTOLOSA
3 жыл бұрын
Of course you can. Just use the Move command and rotate your piece as you need.
@hob976
3 жыл бұрын
@Lars Christensen How do I export interconnected parts ( as .obj's ) from Fusion 360, separately, in a way that they import into Zbrush as separate tools but retain their positions in the design? Thank you.
@silverdog63
3 жыл бұрын
One question: is it possible to decide what is the maximum/min step angle of rotation of the arrange process? do the objects rotate just 90-180 deg or can rotate at finer degrees?
@spyrosspyrou5809
10 ай бұрын
I have a question which is not related to this video. Is there a way to copy a set of user parameters into a new project? I find myself spending too much time typing in parameters to a new project when I already have them in a previous project.
@TiranDagan
3 жыл бұрын
Great video as usual! Question for sheet layout: what if you want to arrange the components on multiple smaller sheets? For instance my cnc can’t handle full sheets so they would need to be broken down. How would you do this in the paid version to automatically distribute to multiple sheets?
@user-wo8tq9tb1s
Жыл бұрын
Manual nesting is always better efficiency wise. Yes there is more work and patience needed but at the same time you save on material costs.
@CrowWood.MetalWorks
5 ай бұрын
Hey Lars I am having a problem with scaling a project. I went to scale it after I made it a body. I used the short cut S and did the math and entered the amount to scale it and everything scaled except the letters that are in the project they stayed the same size. I have now tried to fix them together and now the letters have changed from a green color to an orange. dont know what I did exactly I am extremely new at this. thanks for your time
@chappycole5372
3 жыл бұрын
Is there some keystroke combination that determines if the Line tool in a sketch will continue adding line segments immediately after clicking to finish the first segment? I'm aware that a double-click on a line endpoint will "finish" that line. Sometimes, when I use Line, a single click finishes the line, other times it automatically starts drawing another line segment.
@martelthefirst
3 жыл бұрын
Question: can the arrange/nesting function be used to line up pieces in you drawings? Instead of using animation and explode that is?
@avitolourenco
3 жыл бұрын
best place to ask question with image references? also best platform for fastest response time? also are you open to community questions or just questions that are assigned to you through the fusion support funnel?
@-vermin-
3 жыл бұрын
One week too late! I spent the weekend arranging sides panels of an enclosure. I copy / pasted (components) into a new project to get a flat panelised version. I'm going to go and try the derived method now.
@maxikacper
3 жыл бұрын
Hi Lars I have a question whether in parametric modeling you can use conditions, e.g. to define the number of holes depending on the dimension of the element? Best Marcin
@hans-dieterjung4026
2 жыл бұрын
Hi Lars, you are one of the very best, I'm just worried, your last video is 1 year old according to YT, I hope you are well. I've made a few thoughts and I'd like to note them here. I'm having some problems with Fusion 360 and with my left hand. It is mainly about the orbit functions. I want to/can use my right hand mostly and mostly work/control everything with my old Logitech trackball. That's where the problem with orbit navigation and Shift+Middle Mouse Button / MMB lies. Holding the MMB and moving the trackball at the same time is impossible for me. As a German pensioner, the hardware from 3dconnection is unaffordable for me. 1.) Is there any way I can create / store a shortcut somewhere in Fusion that simulates the MMB and then assigns it to a trackball button? 2.) Is it possible to define a shortcut with which I can, for example, rotate the object in just 15° steps around a defined screen axis (the display X, Y, or Z axis? 3.) Can you call up a shortcut table, sorted alphabetically by key, can see which shortcuts are occupied and which are free to reassign these free ones and can you also edit them there? 4.) Can you define the colors of the lines (marked, projected, center line, etc.) yourself, such as in SolidWorks (my eyesight isn't the best, and people with color blindness might have big problems)? 5.) Can the workspace background be defined yourself (because of recognition) or can Autodesk supply new, higher-contrast ones for Fusion 360?
@lauriepocock3066
3 жыл бұрын
I'm making a model of an HP42, a 1930's airliner, and would like to know how I create the corrugated skin that covers the fuselage, please can you point me in the right direction
@olanordmann7836
5 ай бұрын
When initiating a job in Universal Gcode Sender (UGS) after loading Gcode generated by Fusion 360, the CNC router moves far away from the intended starting position, so far it triggers my limit switches. Do you know whats causing this?
@cadcamstuff
5 ай бұрын
It sounds like you might need to change the safety move at the beginning of your post-processor. Hope this helps
@barrybroadbent4588
3 жыл бұрын
Arranging and nesting is awesome, but every sheet I send for cutting needs to have part numbers scribed in for each part.
@TROYOSTRANDER
3 жыл бұрын
I am interested in getting part numbers on each part too. Any ideas?
@rickiek8268
3 жыл бұрын
Can you do a video when you allign/move or joint a component using an defined axis and an non planar sutface ? Cant figure out it because when I allign it to my axis it does not allign aginst my curved surface. Thank You from Sweden
@ericbeckers2673
2 жыл бұрын
Where is Lars?
@jwonderfulsuccess
2 жыл бұрын
"Lars" - I like that name. He was great in Tekken and now fusion360. 🙏
@mtnton1
3 жыл бұрын
Lars, I really appreciate your videos. Thank you so much. Would you please consider showing us how to draw up a click pen. The Engineerguy on KZitem shows us how it works but it seems really complicated to create. Thanks again. 😊
@grelstkoning9373
3 жыл бұрын
Good to see you again Lars
@arjuncrm255
2 жыл бұрын
Someone kindly help me.....in powermill...how do you deburr a hole which is located on the sides (axis on x) using a lollipop mill from top (z axis)
@mentalmoto763
11 ай бұрын
So what videos are best to watch a learning the normal functions?
@Stealthmode72
3 жыл бұрын
@lars a couple questions... 1-why does my view not auto look at when I create a sketch even though I have it checked in the preferences? 2-why do I not have my constraints in the sketch palette like you do? Thanks for all the great videos!! Learning a lot from you!!
@Karasevichganzaliss
3 жыл бұрын
Hello. Unfortunately I don't have this option 😔 in manufacturing. Is it option not for student version?
@nickarcher8617
3 жыл бұрын
Hey Lars I've learned a lot from your video's but i can't seem to find anything (from anyone) on how to show a flat pattern for a dome for example. I want to make a dome in 2 pieces and i would like to see the flat cut out for each side. can fusion do that? I can make the pieces but i need to flatten them.
@williamdevlin7667
3 жыл бұрын
The last example with the free edition you used a rectangle that you did not extrude. Taking this setup to g code I’m curious about setting up the Noman to get proper reference off the top of the sheet for z zero. You placed the Noman on the flat sheet bottom and the parts were offset for space. New to this so confusing still a bit. I understand the sheet will be on the cnc and zero in the corner and I will zero the z to the surface. Curios as to the difference of extruding the rectangle to the sheet thickness and referencing the noman off that top corner. Now the difference of in the setup of the g code as to the levels with these two differences.
@kimfm
3 жыл бұрын
Lars. How do i post a challenge to you? I have tried other groups with no luck. I have a couple of pictures to describe the problem. Thanks (im Danish)
@Ed.B.V4MO
Жыл бұрын
Hi Lars, great video!!! I have learned a lot! Do you know if is possible to lay flat, setup your cnc tooling paths etc and COPY 5,6,7 whatever many times you want to cut the same assembly then re-arrange those copies with the tool path? …. I already know how to do pattern and multiply my cut paths… but some of my models does not fit very well if I arrange first (one copy) and pattern my cnc program… do you know what I mean? I would like to re-arrange copies with the tooling
@sergeybob3224
3 жыл бұрын
Many Thanks, Lars ! Good luck !...
@masterchief6523
Жыл бұрын
I heard that 360 now has a circuit board builder? How would one go about doing this function? And to be more specific, breadboards for computers or electrical components
@ttakotube
3 жыл бұрын
Excelent video! Thanks Lars! Just a question: as soon as you layed out your nested arranegemnts for the sheet Metal parts, is there an easy way to tell, that from this very parts I need for example 20 pcs and get them auto arranged to the previously sketched sheetmetal plate?
@splitgears3989
2 жыл бұрын
hey thanks for all your videos they have helped me learn fusion 360. In my first project i designed half of a paintball maker body and had a tread on one end in side then i mirrored it and the thread just made rings not threads do you have any advise to help?
@piconano
3 жыл бұрын
I just found your channel and you seem to have stopped making videos. I hope all is well with you. Please let your subscribers know what is happening with you.
@IceCreams62
3 жыл бұрын
Thanks for the video and Happy New Year Lars :-)
@Vormulac1
3 жыл бұрын
I need to create a honeycomb extrusion in the end of a cylinder (it's a sunshade for a spotting scope) but I can't find a way to do it, does anyone have any ideas?
@ki6eeo
3 жыл бұрын
Thanks a lot for your great job !!! Alex Los Angeles
@jimius
3 жыл бұрын
Hi Lars, AD has ransomed my files. How do I get them back? Can't even do a simple DXF export anymore.
@sondre.linonus.berglund
3 жыл бұрын
A factory wants step files with measurements, how do I do that?
@jonnyl1971
3 жыл бұрын
Im using Fusion360 on a computer that are not top of the line. A video with tips and sugestions how to work with modells to opimize performance. Im currently running in to issues where Fusion 360 is haning and i need to kill it. What could cause this in my modell?
@dynexhobby
3 жыл бұрын
I have the same problem :(
@keicer
3 жыл бұрын
Bruce Dickinson never stops of surprising us.
@mikejeddo
3 жыл бұрын
Thanks again for a great video. Next time can you then take to manufacturing and finish up with the cnc part. Thanks again.
@user-dw3dd6tp3o
7 ай бұрын
Could you kindly provide access to the Fusion tool database with parameters? It would greatly assist hobbyists like myself using Fusion 360 for turning and milling projects. Thank you!
@Intervaloverdose
Жыл бұрын
Missing you man :)
@harrywildgoose8544
3 жыл бұрын
Hi Great videos very helpful. What is the equipment on the small shelf above your right shoulder.
@Airisshh
3 жыл бұрын
Was nice to see some new ways of working. Why do you prefer Joints to Move tool (point to point move)??
Пікірлер: 210