Could you not perhaps split the body using the offset surface. Apply chamfer to both bodies and then combine back together?
@Fusion360School
Жыл бұрын
I went to try this and it does work! Such a simple solution. Guess I have overthought this. I would never have thought of using a chamfer. Thank you!
@ChaseDaigle
Жыл бұрын
This is an elegant solution nice one
@AthanCondax
Жыл бұрын
I love all your videos, especially the case studies. For this one, I probably would have used the sweep command after creating a v profile on a plane normal to the edge.
@AthanCondax
Жыл бұрын
Never mind I just finished watching the second approach haha!
@gillisdebilio7086
Жыл бұрын
Awesome as always.
@supergiantbubbles
Жыл бұрын
I wonder if using the path with guiderails (the top and bottom inside edges) during the sweep would have produced better results?
Жыл бұрын
It doesn't work, at least not for this situation because the guide rail is not smooth.
@ChaseDaigle
Жыл бұрын
You'll need a guide surface for the sweep Try sweeping along a coil and you'll see how wrong stuff goes without the guide surface. If you coil a triangular profile the do an offset face of the flat portion of a triangle then you'd be able to sweep as expected on a coil. Same applies here you'll just use offset face to make that guide surface and you shouldn't really need to define that inner line but this does assume that that distance between the two faces does actually stay consistent.
@lukafh
Жыл бұрын
Great video! Thanks!
@TheTrex600ESP
Жыл бұрын
I am just a cnc operator, and use fusion only for hobby at home. But, i think maybe the second method is better with lofting profile through rails? But i would go for your first method. Thanks for all your sharing :) EDIT: And after reading comments, i would go for chamfer to :D hehe
@rbyt2010
Жыл бұрын
yup. would have tried split body/sweep 1st as well. Never bet against @Trippylighting :)
@warsteelcalgarus5790
Жыл бұрын
I am no expert but if you really wanted the sweep to work, I was wondering if you could use the rail option and select the top edge to get the sweep to cut better. Maybe also sweep one half of the body by splitting it with the offset?
@VinyJones2
Жыл бұрын
Wondering the same
@John_colasante
Жыл бұрын
Could you not do both lofts as one operation?
@VinayVarsani
Жыл бұрын
My first thought was using the move face feature. Could you do that after splitting the face and rotate each face?
@fozzyDEN
Жыл бұрын
I split the body using the offset surface and then added a 2.5mm chamfer to each part, then re-combined them
@Galaktican1
Жыл бұрын
How can I submit a topic I'd love for you to cover? I have objects I 3D print with text on the surface. I print the text separately and glue them in later. My workflow for a flat surface is.. 1. Extrude the text as a slight cut 2. Extrude the text again as "new body" 3. Offset the original cut so the text will fit after printing or 1. Extrude the text into the surface as a "new body" 2. use the Combine tool to cut into the surface keeping the cutting tools (text) 3. Offset the cut so the text will fit after printing I now need to do this on a curved surface like a cylinder. The emboss command does not allow me to create it as a "New Body." I just can't figure out a workflow to do what I want. It has to be an Emboss as the extrude feature on a curved surface distorts the text. I've experimented with a surface offset as a cutting tool but that isn't working for me. HELP!
@Galaktican1
Жыл бұрын
I found a solution. Please, ignore my request.
@scottdougla5
Жыл бұрын
Does it work better if you don't mirror the rh line on the triangle and instead coincident like the lh line?
@helicopterdriver
Жыл бұрын
Perhaps offsetting the inside face before sweeping would compensate for the curvature variations? For an injection mould application that sharp edge would be a ejection challenge regardless.
Пікірлер: 21