In this video i am showing you the FX Dynamic barrel weights to balance out the FX Panthera and that they are a good alternative to the M Lok weights that we know .
Is it safe to unscrew the shroud without depressurization. I guess there’s no pressurized air within the shroud?
@Airbuks
Жыл бұрын
You can unscrew the shroud without depressurization 👍
@nico-max
Жыл бұрын
Always cleared explain 👍🇫🇷🥂
@Airbuks
Жыл бұрын
Thx
@davethompson2430
Жыл бұрын
What about barrel harmonics
@Airbuks
Жыл бұрын
So far I don’t see any poi difference , I think since the barrel runs true the plenum and the shroud tightens the last part it doesn’t affect the harmonics that much but it’s worth to play with it and see if moving it back and forward makes a difference in accuracy
@hotchihuahua1546
Жыл бұрын
Changing subjects . Do you think you will be receiving the Skout Epoch for testing in the future?
@Airbuks
Жыл бұрын
No , I don’t think so . I have seen it on IWA but they had so much attention I didn’t had the chance to speak to them
@hotchihuahua1546
Жыл бұрын
@@AirbuksYou do such a good job I think Skout should send you one to do a review. I’m getting a 30 cal today to keep my MKII Gen 3 company . Lol
@BRKGHOST.25
Жыл бұрын
Can these be used on a fx impact mk2 sniper
@Airbuks
Жыл бұрын
It does fit inside the shroud of the impact but you will need to undo the endcap at the back , slide it over the barrel , place the weight and then screw the shroud to the endcap ( I have a picture on Instagram about that )
@hankvana2149
Жыл бұрын
Hi, would you please post the factory settings from your Panthera. I just received my .22/700 (reg 150, micro 1.25, macro 2) and am curious if the settings are similar. Thanks!
@Airbuks
Жыл бұрын
Hi , my factory settings where 135 Macro at 23 and micro at 2.5
@murathayta3211
7 ай бұрын
So how many dynamic weights do you advise? My panthera is 5.5 700. 34 grain 1000 fps I use
@Airbuks
7 ай бұрын
3 is the perfect amount for me
@murathayta3211
7 ай бұрын
@@Airbuks so if ı don't use weights, what is the disadvantage for benchrest? Thanks
@Airbuks
7 ай бұрын
@@murathayta3211 On the bench with bigger calibers .30 for instance it can reduce the amount of flip when firing a shot . Or when shooting PRS it helps to balance the rifle
@murathayta3211
7 ай бұрын
@@Airbuks Have you got any problem with valve holder cap? ın this cap, there is 3×1.2 o ring. And this o ring stratched in very short time and leak. What is the solution about this problem? Have you got any idea? Thanks
@JustMe-xe2wu
Жыл бұрын
The rest of the world who use .177 calibre wants you to make videos of stock FX impact M3, without any addon....till date nobody dared to make a tuning videos with .177... as it is very difficult product FX has launched but forgot...
@Airbuks
Жыл бұрын
I just have bought a 177 barrel a week ago to do some testing , but I assume you would like a video in sub 12 😬 all my guns are FAC
@mustafakhan7953
Жыл бұрын
Will it help in harmonic tune of the rifle?
@Airbuks
Жыл бұрын
It will change the harmonics yes , all still to be tested 😉
@salemdorgham2891
Жыл бұрын
Please I want video to regulator fx impact mk2
@Airbuks
Жыл бұрын
What do you mean , disassembly or ?
@mikesanchez1403
Жыл бұрын
So Im in the US are they selling any store here yet?
@Airbuks
Жыл бұрын
Fx USA should be able to provide you with them and I have see. Some posts by Ken Hicks with these so I think that could be a option aswel
@mikesanchez1403
Жыл бұрын
Thanks for getting back to me appreciate it love your channel A+
@shiz8048
Жыл бұрын
so ....this little pis cost you $99 ??
@Airbuks
Жыл бұрын
No 50€
@dataykhan
Жыл бұрын
I don’t think so this is worth i think this is just worse
@Airbuks
Жыл бұрын
What do you mean ? This is to balance the gun not for any harmonic tuning or so
@tyrantwitness2482
Жыл бұрын
Goes totally against free floating the barrel! Many remove the spacers.
@Airbuks
Жыл бұрын
The weights don’t touch the shroud 😉 the only spacer is the one on the barrel nut . Some do remove it indeed , but since the plenum covers 50% of the barrel and stiffens it because it’s under pressure there isn’t really a free floating barrel
@larry11251956
10 ай бұрын
Is this barrel clocked and marked at the 12 o clock position?
@Airbuks
10 ай бұрын
Do you mean the barrel in the Dynamic ? The barrel is marked for its optimal position but different projectiles can behave differently so if you are experiencing anomalies then I would advise to readjust it and see if you get improvements .
@johnbeetge4137
Жыл бұрын
barrel harmonics ?
@Airbuks
Жыл бұрын
Until now I don’t see any difference in poi , the barrel on the panther is so stiff it doesn’t affect anything
@keithrush4168
Жыл бұрын
Almost have my 600 .25 Panthera ready for the Pyramid Cup. It’s sporting the pellet liner and set up for BR only. I have most all of the same Saber assemblies you do. Always enjoy your videos. Hope to meet you at a future competition. Keith
@Airbuks
Жыл бұрын
Hi mate , I am also looking into making a BR gun for comp but in 30cal . Love to meet you somewhere aswel 👊
@tomiliff7591
Жыл бұрын
Have you thought any further on the self indexing impact magazine? Has anyone expressed interest in making it from your design
@Airbuks
Жыл бұрын
Yeah , I was talking to eagle vision and at first he was interested but 2 days later there where already 2 copies for sale in eBay 😔 but now it cooled down and I might pick it up again
Пікірлер: 47