That saved me from sending my Hatsan mags back right after I got the rifle in the mail. I buggered one magazine up and the other came pre-buggered, so I had to fix both of them. I was looking forward to getting down to business and sighting in my new rifle, and boy was I pissed. I had never used this system before and didnt know what I was doing. You just saved me another week of waiting. Nice job.
@tahsin95
3 жыл бұрын
thanbks dude, helped me out - didn't know how to reassemble mine after cleaning the insides
@albertopapi4445
7 жыл бұрын
I had the problem that on mine to were the screw got loose and the magazine spring loose his tension. Thanks to your video now I got it working as new.
@joedoe8584
7 жыл бұрын
Thx Ernest. Funny I just asked how the magazine assembles 3 days ago on Airgun Nation forums. Thanks for putting this together.
@ernestrowe5061
7 жыл бұрын
I seen you post, and that's why I made the video.
@nickshergar
6 жыл бұрын
This video saved me SO much hassle... Thanks so much buddy......
@mrshoto9035
7 жыл бұрын
Thank you Ernest - nicely done, & very helpful. Best regards
@relzric
7 жыл бұрын
Cool. When I put mine back together I did not know the top of the wire went in a hole. I thought it locked in place from pressure. I will have to take it back apart. The first time I did it it kind of freaked me out when that spring buzzed out. Thanks for the help.
@fekrire
7 жыл бұрын
Wow such a great video, keep up the great content
@manolofdez3739
5 жыл бұрын
i appreciate your help, thanks very much!!! from mexico city
@marierosellev
6 жыл бұрын
thanks great video. How much spring do I remove because the first pellets skirt gets squished when I reload for my FX Crown?
@MattsplatsGunReviews
7 жыл бұрын
Thanks a lot for the video. This was really helpful. I don't think I would have figured it out without it.
@fred9532
6 жыл бұрын
Great repair videos.
@cavalcantecavalcantemtogro3946
5 жыл бұрын
Show de bola Parabéns
@alviahmed2582
5 жыл бұрын
now i know how to make one! thank you
@naser7611
4 жыл бұрын
This video saved my life 😅 Thanks for your video and shame on FX with this stupid magazine.
@onepiece888
4 жыл бұрын
I know Fx has increased the magazine capacity with the new design but I just wonder isn't it possible to inrease it even more with a drum magazine mechanism by enabling to load the inner circle ?
@davidkenneth499
2 жыл бұрын
Ernest, my magazine keeps coming loose, after loding several times the nut comes loose or apart, with the 2 ball bearing needing put back in place, I am also worried about losing the ball bearings, can you help me sort out this problem, may be a locking nut would help, as you have to get it just right tightening it back up or it will not index properly, the mag is in .22 David.
@johnsingleton6079
7 жыл бұрын
That's a shame. What about the smaller verminator magazines, will they load from the other side and work properly? Many thanks John
@juanmc8100
7 жыл бұрын
Thank you very much for the video was very useful for me
@youtube_threeBairguns
4 жыл бұрын
Hola maestro, tengo una consulta tengo problemas con el supercargador de mi fx impact mk2, aveces el bolt pega en la parte plástica y no pasa el poston que podrá ser?
@paulwainwright8149
6 жыл бұрын
four rotations is far to much this will mark every pellet that goes through the mag you need the min number of turns to feed all pellets l have mine on one and a quarter
@johnsingleton6079
7 жыл бұрын
Cheers for video Is there anything you can do to make these mags load from the other side for left handers?
@ernestrowe5061
7 жыл бұрын
no! It would be nice if FX can machine mags for lefties, but the lower mag stop has to be modified to accept both mags, To much work and may increase the price.
@Marshall2012omg
7 жыл бұрын
John Singleton use a mark 2 vermi or bobat mag if you want it load from left hand side. Works for me.
@johnsingleton6079
7 жыл бұрын
Marshall Flanagan Thanks for the advice. I'll have one very soon!
@wewekokowe6887
5 жыл бұрын
One day maybe... FX will evolve and they make a gun what can cycle a magazine (without shitty springs)
@Squirrely1498
6 ай бұрын
Well all I did was break my spring 😅
@who0who
7 жыл бұрын
Thanks...
@moonc4lf
3 жыл бұрын
I guess it takes only one turn for Streamline magazine, there’s no way it can go 4 🤷♂️
@eric1138
7 жыл бұрын
Thanks
@paulwainwright8149
7 жыл бұрын
Good basic descriptions but I don't always agree with all your actions I have just cleaned and reassembled my magazine with 4 turns loaded the mag and manually pushed all the pellets through with a piece of wood .Inspection of the pellets showed a line indicating a snapping action of the inner mag rotation I would suggest the min amount of rotation of the spring to feed all the pellets through manually without marking them
Пікірлер: 34