Easy to watch and follow instructions, I liked it, thanks.
@Antovit22
3 жыл бұрын
Grazie amico
@patrickatagi2414
3 жыл бұрын
Thank you! Made quick work on my 2021 HD Slim.
@timfinning
4 жыл бұрын
That's 15 minutes of my life I won't get back
@colinoz
2 жыл бұрын
It's easier if you put the heat shields on the new slip-ons before you in install them on your bike, as per instructions that come with the kit.
@Antovit22
Жыл бұрын
thanks for your advice
@antoniotapiaarribas9424
5 жыл бұрын
Muchas gracias por el tutorial justo a tiempo.
@parikombhutkan3441
3 жыл бұрын
It’ll be great if the sound check before and after. Nice clip, big thank.
@lc1966
2 жыл бұрын
Very helpful (Thank you)
@Antovit22
2 жыл бұрын
Grazie amico
@StrivingMen
4 жыл бұрын
Doesn’t cover or block where the passenger pegs goes ? Some pipes don’t let you put the passenger pegs where they go
@Antovit22
4 жыл бұрын
StrivingMen no quiet all normal
@alekaleksanianantonic3162
4 жыл бұрын
good instruction vid mate...Thank you However did you replace the gasket or use the same ones that came with the bike
@raynald4010
4 жыл бұрын
Thanks 👍
@iamlegionforwearemany9289
5 жыл бұрын
Great video and step by step instructions. Didn't like the music tho. Lmfao
@xzsdfvdfbv
5 жыл бұрын
well it's not Stevie Ray Vaughan, but I like the music, even if the beat is overly OBVIOUS :-D
@LA-ff6zk
Жыл бұрын
How about socket and allen wrench sizes.
@andresleos2695
4 жыл бұрын
What about gasket
@wunique1376
5 жыл бұрын
Thank you for the video. Very informative. How does it sound? Why not bought black?
@Antovit22
5 жыл бұрын
Wunique For the saund next video. Black for break the color. Grazie my friend for your comment😉
@ducatipete5404
2 жыл бұрын
Thank You man …. You’re the ONLY Video I’ve seen that shows the Mid-Pipe Gasket being Installed with the Slip-On’s 🤷🏻♂️ ⁉️ In every other Video the Pipe just Magically Appears Installed as soon as its held near the Mid-Pipe 🤨…. F**kin annoying. Thank’s for taking the time . Quick Question, Did the Vance and Hines Sip-On’s INCLUDE the Gasket’s , OR Did You have to buy them separately ? COBRA doesn’t include them, or even TELL you until about it… You have to figure it out During Install 😖⁉️ Either INCLUDE the Gaskets and charge more, or at Least TELL the Customer that they will need to buy them 🤷🏻♂️. I don’t know man - that just seems really weak to me. Luckily my Bike is new ( less than 300 miles on it ), So I can get away with re-using the Stock ones - but I would have been PISSED if I had to deal with that in the middle of the Job. Anyway, just wanted to say thanks for putting out a REAL Installation Video . I think most people just want to show off they’re bikes 🤔💭…… ( which is OK - Just don’t call it an Install Video ✅ )
@Antovit22
2 жыл бұрын
Hi, they are not supplied, it's okay to use the originals, thanks for the compliments
@emanueleitalia8695
5 жыл бұрын
Ciao che differenza c’è con i 300 eliminator sono indeciso...come suonano le twin s?
@Antovit22
5 жыл бұрын
emanuele italia Ciao, la differenza a parte l’estetica non la conosco, suonano da favola, secondo me di meglio non si può sentire, scegli quelle che ti piacciono di più.....✌🏻✌🏻✌🏻✌🏻
@gerraldsamraj
2 жыл бұрын
Nice tool kit.. where did u get that?.. n thanks for the upload
@Antovit22
2 жыл бұрын
luismoto.com grazie amico
@gerraldsamraj
2 жыл бұрын
@@Antovit22 thx so much
@jagjr6772
9 ай бұрын
Are you sure about the link for the tool kit? I could not find it. What is the name of the manufacturer name? Thank you.
@godlyk3
5 жыл бұрын
Much better on mute.
@bigalb8935
4 жыл бұрын
What about the gasket the whole purpose of making a video is doing it properly where is the gasket can you reuse or do you have to buy new ones All These videos and not one person explains that
@Antovit22
4 жыл бұрын
Big al B Quale guarnizione? Nel kit di montaggio non c’è nessuna guarnizione. La prossima volta che faccio un video chiedo il tuo parere
@malcvtr
2 жыл бұрын
No-one explains it because there is no gasket between the muffler and the header pipes. You must be thinking about the gasket between the header pipes and the exhaust ports.
@bigalb8935
2 жыл бұрын
Oh yes there is on 2019s and up where the clamp is to tighten the slip muffler there is a gasket that goes in that end on Harleys 🧐
Пікірлер: 36