Thanks bro! This helped me adjust my rear brake on my Low Rider ST. Thank you for the video!
@DjVendetta
10 күн бұрын
You’re very welcome!
@kevinryan7935
2 жыл бұрын
Great video - RIGHT TO THE POINT! People often yap forever before showing you what you need. Thank you for being better!
@Torch114
3 жыл бұрын
Thanks bud, very informative!
@DjVendetta
3 жыл бұрын
You’re very welcome
@JCunningham21
2 жыл бұрын
i also drilled out the bracket to 5/16" and put a stainless 5/16" clevis pin in it. took out all the slop.
@josephmarsh6304
3 жыл бұрын
Thanks for the video!
@DjVendetta
3 жыл бұрын
You’re welcome
@JCunningham21
2 жыл бұрын
for mid controls the best thing to do is get a adjustable linkage.
@patrickmcaleer2626
Жыл бұрын
Can i ask a question? I been trying to ask in FB groups and what not. You can do this or purchase $100+ linkage where does doing this measure up to spendign that money? Like is it pretty close of a difference in the location of the pedal. I have done this and dont know if it because I got small feet but its still not stopping me in a pinch without standing on it.
@IRVS61
3 жыл бұрын
There is a easier way that doesn't require you to remove the Master Cylinder/Reservoir. Remove your brake pedal mounting bolt after you remove the pin & retainer connecting the pushrod and you have all the space you need by taking the pedal off.
@palmettolowlife1996
3 жыл бұрын
What does this do ? Increase the angle of the lever itself or something else?
@DjVendetta
3 жыл бұрын
Increases the angle and allows you to get more leverage.
@andantlu8925
3 жыл бұрын
You can also replace the brake linkage i bought a greene brothers brake linkage for my 21 fxlrs and its significantly better you can also raise and lower the pedal on the fly just like the clutch linkage with a 10mm wrench
Пікірлер: 15