It works woaaa you just solved my 6 month old problem in 11.42 mins thanks a bunch !!!!!
@Rudster111
5 жыл бұрын
Your most welcome bud. Enjoy endless full auto with no fails! 😂
@blackout9108
2 жыл бұрын
I got this mags second hand with lots of feeding issues. First i though it was a problem with the mag design, but after taking them apart and give them a good cleaning i never have any more feeding problems with any of my 5 mags and with the follower. Now they feed every single bb. Honestly awsome mags
@alecross101
5 жыл бұрын
Great vid. Helped me out of a very frustrating situation. Easy to understand and to the point. You sir have earned a sub!
@Rudster111
5 жыл бұрын
Thank you so much. Uploading a bit slow. Have some pc issues. But more vids to follow in the near future.
@werklamp
5 жыл бұрын
Excellent job fella ;-) See that rectangular plate on the side - that holds the feed spring. If you flick the top of the plate (a small tab) out carefully then remove the plate downwards and out - it'll remove the spring - no more exploding internals during a strip. It also makes re-inserting the spring post-reassembly easier, too ;-) also means you can pull the dumb ass pin out without unscrewing it all (just play invisible marble maze to slide it down the internal rails ;-)
@Rudster111
5 жыл бұрын
Ill have a look. Thank you.
@yaronl245
4 жыл бұрын
I can confirm, thanks for the message!
@cabbshills5732
6 жыл бұрын
Nice and informative for the guys with these mags. Nice one my bro!
@scottrussell9417
10 ай бұрын
Just done this with one mag I was having issues with works great now many thanks
@allsortsnz
2 жыл бұрын
Yes mate!!! I totally thought I'd wasted my money, appreciate the video man you have solved my issue haha
@shanieub40
5 жыл бұрын
Thanks for the info man. Greetings from Ireland.
@skully4410
4 жыл бұрын
shane boylan where do you play?
@joshuastauff6037
4 жыл бұрын
Thanks for this great information. Greetings from Germany
@69pornstar69
5 жыл бұрын
Thanks man Greetings from Portugal
@matan081
Жыл бұрын
Thanks i have the exact samemag and i saw it didnt feed bbs so i looked inside and it was stuck so thank you so much
@TheRimmerFiftyNine
5 жыл бұрын
Thank you very much for the info. Worked like a charm.
@AngelsofDeathAirsoft
5 жыл бұрын
Thank you brother, I am going to do this Saturday in my spare time to my 5 g&g mags(none of them feed lol) Hit you with a sub and rang the bell, thank you
@Rudster111
5 жыл бұрын
You are most welcome. Thanks for the sub. New vids coming again soon. Im having some camera issues atm.
@scream2749
3 жыл бұрын
Great video, now I know how to take it apart and put it back together lol and I can take off the dingaling if I want too lol
@jackson22668
6 жыл бұрын
Thank fuck i found this video! I got 2 of these and i was wondering why it was jamming so often. This video explains a lot. Thanks! Also is your accent from New Zealand?? Guess we're both from NZ aye lol
@Rudster111
6 жыл бұрын
Hey man. Glad you found this helpful. South African. Let me know how well your mags perform now.
@jackson22668
6 жыл бұрын
It performs perfectly. Never ran into a jam before ever after i did this. Thank you very much man
@buttercream02
2 жыл бұрын
I bought a G&G g36 recently and had major issues with feeding, they still use the same plastic bit, took it out, no issues since, absolutely nuts that 4 years later this is still a bug issue.
@ractural4448
4 жыл бұрын
Thankyou bought 3 today and they was not feeding done this and now they work thankyou ❤️ such a shit design
@Rudster111
4 жыл бұрын
Glad it helped.
@Winters11
4 жыл бұрын
This is the wrong and hard way to assemble the mag. You have a cap in the side of the mag that pop off. You screw everything toghter without the spring. Spring is the last part, and will enter on the side, via the slot you just open when you remove the side cap. Spring enter via the SIDE of the mag, not from the top. That way you save some minutes of work, and you will not risk losing anything.
@Rudster111
4 жыл бұрын
Thanks. I’ll give it a try.
@XATAGE0779
6 жыл бұрын
Thank you mate, very much! Works also with CYMA AK mags .
@Rudster111
6 жыл бұрын
Nice! Glad it worked for you!
@PapaOrlando
5 жыл бұрын
Thank you sooo much
@Rudster111
5 жыл бұрын
Enjoy!
@pontifex1853
Жыл бұрын
I bought 5 G&G 105Rds mi cap transparent magazine and I am having loads of feeding issues with them. Sadly this did not help it much or atall. I still get 3 rounds of and then a missfire 3 rounds again and a missfire and so on :(
@JBAIRSOFTIRELAND
4 жыл бұрын
Why didn't you just use the spring door to put the spring back in.
@adamboardman3128
4 жыл бұрын
WICKEDJELLYMAN I was wondering the same lol
@easy_3d
2 жыл бұрын
Hi, can you tell the specs of the magazine spring? What is the thickness of the spring wire?how much is the free length of the spring? How much space in between coils and what is the diameter of the spring?
@ashlarsen
6 жыл бұрын
thanks a lot bud
@Rudster111
6 жыл бұрын
👌🏻👌🏻👌🏻
@HoRRoRlets
6 жыл бұрын
Giving it a try for tomorrow!!
@Rudster111
6 жыл бұрын
Harry Van Der Schyff tell you what, im not going to ask you how did it go. Im gona rather ask, how happy are you 😝 Let me know.
@HoRRoRlets
6 жыл бұрын
Rudster-x Yep...actually had no problems at all!! Can honestly say Im very happy!!
@Rudster111
6 жыл бұрын
Harry Van Der Schyff awesome! Glad it’s working for you. Thanks for coming back for a second comment.
@codyboyer3250
5 жыл бұрын
Okay but isnt that the part that feeds every last bb? I would like to keep that feature of the mag
@Rudster111
5 жыл бұрын
Then you have to deal with the miss feeds.
@FuFu1337
5 жыл бұрын
its just 3 bb's that you loose at the end of your magazine, but you can feed another 3 bbs into the mag after removing the Follow up Pin. which give you 123 bb capacity with at the end of the mag you loose 3 bb's that dont feed up to the hopupunit
@Rudster111
5 жыл бұрын
I agree. As well as...how many times you think your mag is empty and pull it out to check and drop 4 bbs anyway just to discover it wasn’t empty. But now..when the gun dry fires you know for sure the mag is empty.
@Jsc4ff
2 жыл бұрын
Hey man i just brought one of these what makes the bbs come out of the magazine ? Does the chamber hop have to push the spring down to let the bbs out because mine is not doing that it only lets out 1 bb to shoot and stops letting bbs out.
@joshhowe49
5 жыл бұрын
I have done this mod and the mags now work fine IF I use 0.2g BBs, i prefer to use 0.25g BBs (same brand) but the 0.25s don't feed! Any advice??
@Rudster111
5 жыл бұрын
Maybe the mag spring is worn. How old is the mag? Do you leave the bbs in for extended time periods? Maybe try and clean the inside of the mag nicely. And give a thin coat of silicone spray? I hope that helps. I have not encountered misfeeds with heavier bbs. I use .30.
@Pastyrocco1981
4 жыл бұрын
Hi I’ve just purchased a G&G CM16 raider L the magazine I got with it is a wind up at the bottom but it doesn’t work great at all . Anyone had same issue ?
@Rudster111
4 жыл бұрын
When you say it doesn’t work great...does it missfeed? Try and wind that wheel often and wind it well. If it doesn’t work great after that, take it back to the store you bought it from.
@Pastyrocco1981
4 жыл бұрын
Rudster-x thanks yea I bought a pull string mag of amazon appears to be a lot better than wheel version that came with gun don’t have to keep wheeling it all the time
@JuggernautHunter02
6 жыл бұрын
Ahh, so all I need to do is take out the follower? (The black nub)
@Rudster111
6 жыл бұрын
Yes. Just take that out. The loose little piece. It is the part that gets stuck around the bends.
@JuggernautHunter02
6 жыл бұрын
Rudster-x great, many thanks!
@JuggernautHunter02
6 жыл бұрын
Rudster-x I'll let you know how my mags perform once I take out all the followers
@Rudster111
6 жыл бұрын
Awesome! Looking forward to hearing from you. Remember. The loose one that sticks out the empty mag. 👍🏻👍🏻
@JuggernautHunter02
6 жыл бұрын
Rudster-x Hey! I did this to all 5 of my mags, and it worked! The only thing is they didn't feed the very last BB, and I mean all of them only left 1 BB in the mag. But, that's not a big deal, as it's only one BB. Thanks a bunch!
Пікірлер: 65