Nice fix, I’m going to have to do that to mine. 3POA PODCAST tomorrow at 5pm pacific 8pm eastern time. 🤘🏼
@desert_hunter83
Жыл бұрын
The man. The myth. The Legend 🥷 Looking forward to this discussion 🎙️🎧👀😏👍
@impossiblepie
Жыл бұрын
For life!!!! 🤘🏼🤘🏼🤘🏼🤘🏼
@spot138
Жыл бұрын
I like using clear nail polish myself, but to each their own. I didn't realize it before - but holy shit! They do look like sisters, and will be so in my head cannon from now on.
@stevenboyd3756
Жыл бұрын
Thanks for the fix. I have the same problem with my Zarana. I think she's the best female in classified so far. Her articulation is how all female Hasbro figs should be.
@cptladder
Жыл бұрын
I didn't suffer the loose arms on Dusty or the Crimson Guard, but the moment I got Zarana... POP! Off came her arm and I had to spend 15 mins looking for it cus it shot off the shoulder like a bullet.
@KensToys74
Жыл бұрын
Shit, that snapped faster than my diet plans...
@LaserPants
Жыл бұрын
LOL
@whiskeytangofoxtrot2
Жыл бұрын
Can’t wait for the 3POA tomorrow, speak your mind brother, this will be very interesting. Sorry to see you had issues with Zarana, I have two as well and they were both good to go but I did like that you showed an easy fix to help those who did have issues, way to have the communities back.
@ArticulatedNinja
Жыл бұрын
Thanks fox 🙏
@howler6896
Жыл бұрын
Every time someone posts a video like this I start going through my figures to make sure that none of them have similar issues. Won't be able to watch live tomorrow but will definitely be stopping by to say hello. Good luck man!
@demetricsmith471
Жыл бұрын
Zarana is the first female figure that I ever purchased as a kid so she is one of my most anticipated figures of all time! I had the exact same loose arms but I am so biased that I overlooked it. It is disappointing that Hasbro let such a wonderful figure release with such poor quality control. 😢
@GrimmysReviews
Жыл бұрын
Not sure if you'll find this helpful, but if you don't want to use Crazy Glue, you can try Pledge floor polish, the ones that say Future Shine get the best results. Many Transformers fans use it to tighten loose joints as the polish thickens the pegs and other parts of the joints. Might help here too.
@ArticulatedNinja
Жыл бұрын
I gotta check that out thanks
@davidr8389
Жыл бұрын
Thanks for showing a fix. I had the same issue. The first time, I returned the figure. The replacement also had the same issue but the arm didn’t pop off as bad.
@jstingray
Жыл бұрын
I've had to do this fix for a couple of mcfarlane figures. I'm with you man. I love this figure, but the QC is ridiculous. Both arms on mine fall off with the slightest movement.
@EyeSurpri
Жыл бұрын
That's crazy you have that issue too! As soon as I removed the figure from her packaging and I started testing out the joints, POP goes her right arm. I still have that right arm somewhere around.... Thanks for the informative fix/review.
@boriicuashortiix
Жыл бұрын
Pandora and Zaranna look amazing together ! Great fix on the figure , it sucks that hasbro can’t get their qc together … all the more reason why valaverse is better.
@billymarroquin5246
Жыл бұрын
Yes, can't wait for tomorrow, A.N. and 3POA is gonna be bananas
@GT_rising24
Жыл бұрын
You are braver than most😭 I still have childhood anxiety when dropping figures
@JustinTyme33
Жыл бұрын
If your fix works it’s the one I would be most comfortable trying. It’s simple. I’m not a customizer.
@damionalbarr7961
Жыл бұрын
OH YEAH...That's a MAJOR Q.C. issue for me!
@johnwatson7487
Жыл бұрын
Like so many of us I thought it was just me. Thank you for this video. Awesome thank you.
@johnnystratos9168
Жыл бұрын
Saw you on the 3POA podcast and started watching your channel and subscribed. I'm really enjoying it. Great work and great channel. Thank you
@autumnrayne9663
Жыл бұрын
CANT WAIT FOR 3POA TONIGHT 🎉🎉🎉 love your honesty ALWAYS , this review was great
@schadenfreudeind
Жыл бұрын
Clever fix. Zarana and Pandora look great together. Have fun on 3POA!
@ArticulatedNinja
Жыл бұрын
Thanks shad, will you be attending the joefest convention?
@schadenfreudeind
Жыл бұрын
It's in GA, right? Probably won't be able to get out there
@CollectingHavok
Жыл бұрын
I got lucky with mine, I messed with it a bit, and doesnt' feel like a loose arm for mine... I didn't get dusty... I'll have to double check my CG"s now.... but that super glue is a damn good idea for temp fixes and such!
@scubapete9500
Жыл бұрын
Ninja busting out some crazy balls! Great fix sir. Looking forward to your 3POA debut. 👍😎
@johnnymarbles6130
Жыл бұрын
Only man real enough to kick that shit off the screen!! Looking forward to the podcast tomorrow! LETS GOOOOOOOOOO
@MadAboutToys
Жыл бұрын
Awesome fix Ninja, I never had any issues with Zerana but I definitely same issue with Dusty. Looking forward to the podcast. Tomorrow. Have a great weekend 🤙🤙
@ArticulatedNinja
Жыл бұрын
Thanks mad i gotta check out ya recent vids i missed a few 🙏 appreciate you tho man be safe
@robertsinfiniterealms1308
Жыл бұрын
Awesome vid. My wife actually laughed out loud when you knocked off her arm with a finger. I’ve not noticed this with mine when I reviewed her, but I’ve had a few drinks and will check her when I’m a tad more sober. Can’t wait for 3POA
@ArticulatedNinja
Жыл бұрын
😂 im glad you and her enjoyed the vid man thanks
@robertsinfiniterealms1308
Жыл бұрын
@@ArticulatedNinja Always my man.
@myronaustin
Жыл бұрын
Got one, she didn't break, but DAMN glad to see a fix is out here if needed! 👏🏾👏🏾💯🔥🔥🔥
@Backwoods78
Жыл бұрын
Can't wait to see you on there.
@jaredwhite9673
Жыл бұрын
Yesterday I finally found a recondo. I got home and it was trash. It prompted me to make a video on IG comparing Valaverse to hasbro, but the issues are insane. His paint apps are jacked, both ears have chunks in them, both feet are frozen in place and both lower knee joints are frozen. I didn’t mess with my zarana much but my dusty did seem to have a loose arm and I didn’t mess with him much because he has a knee joint that wasn’t cut properly. I can show you all these issues if you care to see, but I have the worst luck with my classifieds. Even my bazooka has trash legs. This is a long comment, don’t blame you if you pass it by, love the videos you make, thank you and keep it up.
@ArticulatedNinja
Жыл бұрын
Thanks i read every comment even the long ones it sucks that your area is getting so many hit regarding qc and these damm figures.
@citadelli
Жыл бұрын
Can’t wait for the party 🎉 you’ll be great!
@hankv.p6421
Жыл бұрын
They dont make them like they used to 😆
@caliberjacket5871
Жыл бұрын
Or rather they can make them if you have a more focused line of figures.
@katlinhager1813
Жыл бұрын
Can't wait for you on the 3poa..hoping to make it live but if not replay squad as usual for me..gonna be great
@ArticulatedNinja
Жыл бұрын
Thanks
@findmyfigures2707
Жыл бұрын
Photography and videography is🔥🔥 can’t wait for the podcast tomorrow!
@simypkl
Жыл бұрын
bro, you and 3POA are very good reviewer man
@traviswilcox3472
Жыл бұрын
Always enjoy your vids, very helpful fix. Ask Bobby if he’d ever offer a “head pack” with various different looks for both male & female figures especially for the troopers. Some different hairstyles & colors, different skin tones with & without facial hair.
@ArticulatedNinja
Жыл бұрын
Hes teased they are on the way check out his Instagram
@somarriba333
Жыл бұрын
Yup. My Zarana has the same issue. I came to the same conclusion. It's a great figure but not worth the price. I compared it to the Valaverse Pandora. A more expensive figure that IS worth the price and I do not like paying more but it's interesting that I feel ripped off paying $25 for one figure and then feel I got my money's worth on a $35.
@stevevivier2820
Жыл бұрын
Man they do look fantastic together!!
@AlcoholAndAnimeNight
10 ай бұрын
Thanks for the heads up. I have her incoming and feel prepared now
@wilfredodiaz8743
Жыл бұрын
Nice simple effective repair... Thanks. Good luck tomorrow and try to be yourself, you'll be fine👍
@rebooting80s
Жыл бұрын
Simple fix. Thank you. Awsome review. Yea... Hasbro needs to get their shot together.
@mrdude88
Жыл бұрын
I hate on Reddit how many toy collectors love poking fun at people who post a broken toy upon first handle. They love to say things like, “You must be new to toy collecting,” “These are collection, don’t you know you have to heat it or use boil water before you move it?” Like when did so many people come to accept these QC issues? We should never have to apply any heat or make any fix to a brand new toy.
@Primeghost_2
Жыл бұрын
Thank you for bringing this problem up regarding Zarana, I've seen the arm problem with Zarana but Dusty and the Crimson Guard I mean damn that sucks. Now I don't know if I want her anymore😑
@isaacortiz5463
Жыл бұрын
Nice vid bro! Appreciate you as always!
@rolent23
Жыл бұрын
Great content sir but I will be honest the drop test had me cringing the whole time as I think most of my stuff would break apart dropping them onto concrete your a brave man!
@findmyfigures2707
Жыл бұрын
He’s done drop tests in his previous videos with accessories and figures ! Every time it’s extra cringe but AF holds up fine 😂😂
@ArticulatedNinja
Жыл бұрын
Thanks monti
@nelsonculligan1491
Жыл бұрын
Dang... my Dusty figure has this exact issue. Thanks for the fix solution!
@sarkasmdaimyo2572
Жыл бұрын
Articulated Ninja Reviews Bro many thanks for this review. I totally agree with what you say regarding Hasbro/ML & G.I.J. Classified for the money they're demanding for at least have the figures as a finished product. Keep up the good work Bro. This helped a lot.
@scottvillett4854
Жыл бұрын
With mine it was the right arm and if I look at it too hard it flies off......I heated it up and used pliers to squeeze it around the peg......while holding the bicep with some pressure I ran it under cold water and it seems to be holding.....but I like your method man I'm a try that and see if the combination of methods will work.....man I'm paying $46⁹⁹ up here in Canada for these things....and yea she looks great (btw same issue with Dusty on the left arm) for the money they're looking for God damn Hasbro......fix your shit..........great video man thank you for looking out for the community
@Mr.fabart
Жыл бұрын
I’ve got the same problem with Cover Girl for the right arm… Thank you for the tip.
@andrewgaughen9310
Жыл бұрын
Makes me wonder if Hasbro switched factories for this wave (Dusty, Crimson Guard, Zarana). I'm not saying it's an excuse, but just something that would make sense why that specific area is a problrm on all 3. Hell YEAH they should be complimentary! What's the fun if you DON'T mix-and-match them? To make your own unique versions? Classified, Valavers, GridIron- use'em all!
@JoseSantos-xz4db
Жыл бұрын
Ask Vala if he will rereleased the urban and riot trooper again …
@rodneysessoms8804
Жыл бұрын
Kerak & Bone collector while you're at it
@ArticulatedNinja
Жыл бұрын
He's shown teases already that bone collector is coming i believe and kerak also
@Ezilla82
Жыл бұрын
Oh, good lord Zarana's arm snapped off like when Thanos did that snapped your his fingers and your dead thing.
@ArticulatedNinja
Жыл бұрын
😂😂 facts
@Ezilla82
Жыл бұрын
@@ArticulatedNinja 👍
@vadoraid2517
Жыл бұрын
Dang I wanted a. Zarana or 2. Fwoosh had a good idea: making her a bounty hunter! I’m thinking a mandalorian, maybe fetts daughter. She reminds me of what she would look like. For now she’s just a character in a book. But she’s a tough chic like zarana
@kieronball8962
Жыл бұрын
This isn't just an issue with Classifieds figures, as I have encountered this problem with Character Options Doctor Who figures, as well. It seems as though the increase in price on these modern figures, has also led to a decrease in quality control standards.
@felixirkinas2750
Жыл бұрын
I like that!!!! Increase in Price produces a decrease in Quality...Brilliant!!!!! Peace!!!
@ArticulatedNinja
Жыл бұрын
😂😂
@Jedi_On_The_Gray_Path
Жыл бұрын
Thanks Ninja great video. Mine is the right arm. I am definitely doing this as soon as I can. I think all of them are jacked up Hasbros quality has severely been lacking.
@wsugj
Жыл бұрын
I guess I lucked out. My Zarana and Crimson Guard are straight. I am scared to buy Dusty. Thanks for the heads-up on the fix, cause I may need it at some point. Hopefully later than sooner.
@MrDEMarq
Жыл бұрын
Welp, you beat me too it on the fix. Great video as always.
@SimpleTricksNonsense
Жыл бұрын
I like your raw audio in the little replay.
@ArticulatedNinja
Жыл бұрын
Thanks 😂
@Bearsofthelaw
Жыл бұрын
I totally agree that this shouldnt be an issues, but great advice as ever. keep it up.
@Always_on_Cue
Жыл бұрын
That same shit happened to my boy's black panther figure
@StormShadow75
Жыл бұрын
Yooo! My friend I went over this problem with this figure in my review as well and this is horrible that Hasbro made a great looking figure like this. Big fan of your work I love the video on this figure and the exclusive Action Force figure.🤙🤙🤙🤙
@ArticulatedNinja
Жыл бұрын
I ll check out ya vid in my downtown time thanks 🔥
@StormShadow75
Жыл бұрын
@@ArticulatedNinja yo man that’s awesome that you will take the time to check it out I appreciate you brother! I would love the feedback.🤙🤙🤙🤙💯💪🙏
@DemBaddBonez
Жыл бұрын
🦖: All in all. That is a great fix. & I can't believe I never thought of that. 👀👀
@theweaponx8497
Жыл бұрын
Just subscribed I am brought up on honesty is the best policy. Thank you for your reviews and part of a community telling the truth in the toy collecting community. You Rock Articulated Ninja Reviews!!! ;)
@DavidPerez-nl5cs
Жыл бұрын
Another good one brother
@CutThroatComics
Жыл бұрын
Articulated Ninja what great live stream on 3POA channel. Bravo loved what you had to say and you had some great question for Bobby Vala. Keep up the good work so sweet😎😎😎😎
@ArticulatedNinja
Жыл бұрын
Much appreciated and thanks for tunning in.
@CutThroatComics
Жыл бұрын
@@ArticulatedNinja I appreciate your hard work and cool editing.😇
@80sToyBoy
Жыл бұрын
See if Vala/Bobby will give us some sneak peaks of the female gear packs!
@drunkpandainc
Жыл бұрын
One of the 4 crimson guards i got has a stuck ankle. had to pop it off and shave some material off. Dusty was solid for me. Zarana for me was solid....i dont like where they connected the shoulder pads though..so im gonna get a 2nd one and pull the pads off and attach them to the bicep where the strap is. Lol not gonna lie...i liked the old pompadour look better. Quality for me has been pretty good with the Gi Joes..i have more issues with the legends i got...shit i got boot legs of figmas and second axe figures with less problems then some legends.
@obxnice
Жыл бұрын
Got 2 as well, and both mine her arms fall rt off like she is a mafex first addition Wolverine. And hopefully tomorrow on 3poa u do as talker art said, keep ur identity hiding still. Dress in ur action figure character that you did in ur video when you shows yourself to the world. Your our true to life action figure who can edited and has the ability to entertain as u do with the stuff you come up with.
@je995891
Жыл бұрын
Dope video, my Crimson Guards come in tomorrow, gonna be looking out for the loose arms salute
@TheToyOdyssey
Жыл бұрын
Outside of that one QC issue, I still think she looks better than Pandora.
@gerumguamil2580
Жыл бұрын
nice did mine w a gel type super glue easier to control and stays in place got the POA podcast on notification so i wont miss it hopefully again nice issue review yeah the dusty figure is worst i tore the right arm just taking out the clamshell 😂 i had to pin and do the glue thing just for good measure
@ArticulatedNinja
Жыл бұрын
Damn my bad you had to deal with multiple figs with qc issues
@richardgarcia9075
Жыл бұрын
God bless 👑 Happy Sunday 💪🏿 Congrats with the live show yesterday as always thank you for the information. I just ordered the bloody Pandora to go with my Zarana. I do have a question any information on any vehicles lately 🤔 I get so many positive feedbacks for my helicopter you helped me find last time from your videos. Either way always listening Keep up the good work 👑
@ArticulatedNinja
Жыл бұрын
Thanks and vehicles are hard to come by man hopefully I find more soon
@tigephyfer2049
Жыл бұрын
Ninja can you ask Vala when we will be able to get another Bloody Pandora if we already picked one up. I am giving the first one to my daughter. Thanks brother.
@jonkane1312
Жыл бұрын
Man my Dusty’s left arm did the same thing to.
@Primal2229
9 ай бұрын
Glad I found this video months ago, finally snagged her on sale annnd... both arms. Pretty much like the second one in the video left pops off but the right holds on a bit better but that doesn't matter since the shoulders are so damn tight. Between Zarana and Ironheart I am just reminded why I haven't bought anything from Hasbro in the last couple years. McFarlane may lack articulation but things don't pop off without heat and force, sometimes what should be excessive force.
@StormShadow75
Жыл бұрын
Thanks for the fix on this figure thank you. I appreciate the tip.🤙🤙🤙🤙
@johngeraci3887
7 ай бұрын
Great job
@ArtGcollection
Жыл бұрын
This happens to mine as well right out of the box
@falcon048
Жыл бұрын
F**king awesome! Thank you! I was ready to pull what's left of my hair out with these new wave of figures. In fact, prepare for this problem to show up on Cover Girl. I saw a reviewer who already has it and his popped off. So...this is the future of Classified :(
@ArticulatedNinja
Жыл бұрын
Damn that sucks I've been waiting to get covergirl in hand
@felixirkinas2750
Жыл бұрын
Hi, T=MC2, Do you think it has anything to do with your theory of different factories?!?!?! I recall you comparing the "A" and "B" versions of Classified figures. My Zarana and Dusty are "A's" and have no problems. But, I have a Stalker and TF Outback (Both "B's") who have loose hips!!! Not the same problem, but, still a QC issue!!! Well, Now you know, and knowing is half the "Problem", Ha!!! Peace!!!
@hillbillyharper4008
Жыл бұрын
That drop test is brutal lol
@ArticulatedNinja
Жыл бұрын
😂
@loganus9114
Жыл бұрын
Big thumbs up!!
@findmyfigures2707
Жыл бұрын
I think it’s haslow’s mass plan : let’s give them windowless packaging because we know we’re cutting back on the qc department.
@TheSteelGuy
Жыл бұрын
My Zarana is OK, but keeping that fix in mind.
@jackmaddox4584
Жыл бұрын
Love the Kitbash customs shout out! Love that dudes channel, and Instagram.
@damionalbarr7961
Жыл бұрын
GREAT IDEA using Krazy Glu...I did the same thing to tighten the joints on my DC Multiverse figures
@ArticulatedNinja
Жыл бұрын
Yea those guys be loose loose sometimes😂
@damionalbarr7961
Жыл бұрын
@@ArticulatedNinja FO SHOW, Krazy Glue has become my BEST FRIEND for quick fixes on loose-ass joints.
@nicholaswilliams9474
Жыл бұрын
Brah, it is worse for Power rangers lightning line figs. Hasbro needs to do better. Loving what you do and how you do your reviews.
@impossiblepie
Жыл бұрын
Hey it's Hasbro's answer to kit bashing!!
@perceivedvelocity9914
Жыл бұрын
I've heard that Hasbro hasn't been doing great over the last year. I wouldn't be surprised if they are using cheeper plastic at the same time that they are raising prices. I get the feeling that they need to pinch every penny. Who knows?
@ArticulatedNinja
Жыл бұрын
True 🤔 might be so
@cromedon
Жыл бұрын
Lol same happend to me Ninja, ty for this video. Also krazy (which is kola loka here in Mexico) dries faster when baking soda is applied (little quantity).
@ArticulatedNinja
Жыл бұрын
Thanks
@DareDevilDave75
Жыл бұрын
Looks like Disaronno got that molded in backstrap! My girl! And you’re absolutely right, love the way these two babes look together.
@DareDevilDave75
Жыл бұрын
Zarana! No clue who Disaronno is! Maybe Destro and Zarana‘s illegitimate baby!
@Transforming_Skyscraper
Жыл бұрын
Mine came fucked up too! Left arm came off when I pulled her from the package. I dipped mine in hot water then cooled it right away and it helped. I have two crimson guard and I have no desire to open them. Hasbro needs to improve the plastic formula, right now it is too soft. I feel like this is affecting all their lines. It sucks because it is holding the line back. Valaverse all the way! Bobby knows how to make an action figure!
@jeffmorris508
Жыл бұрын
Great video. Sorry you had to fix your figure, but good simple solution.
@ArticulatedNinja
Жыл бұрын
Thanks 🙏
@darktoylord
Жыл бұрын
I haven't had a problem with my Zarana.. yet.
@supermoduleprime
Жыл бұрын
yep some people on reddit also have this issue.
@CowleyStudentJ
Жыл бұрын
Seems like that's the problem with making figures with parts swapping in mind, compared to sculpting the new parts that they need to sculpt for each figure. And using cheaper plastics to save money while still increasing costs.
@gregarcher8177
Жыл бұрын
Mine was broken in the box when I pulled her out but I popped it back in and no problems yet.
@darienwagner1744
Жыл бұрын
Damn King, I thought I it was just my Zarana. Thanks for the hack. I'm definitely looking to the podcast. Please ask Vala about the upcoming Action Force vehicle and the accessories pack for the female troop builders.
@ArticulatedNinja
Жыл бұрын
Will do
@marksto.domingo8304
Жыл бұрын
My zarana's arm loose too, so i fix it using mini screw. I replaced the peg with head of the screw. Works perfectly.
@sarkasmdaimyo2572
Жыл бұрын
Hey Bro, I don't know if I stated on this vid about Me purchasing a second Zarana(which I did yesterday) & She doesn't suffer from any arm/limb problems this time around(thankfully). The first one I took your advice & the arm is a lot better(I might recoat it just to give it more grip). Again many thanks, I also purchased Robert/Roberto(Recondo) as you call Him😂😂
@ArticulatedNinja
Жыл бұрын
😂 ayyee you got robberrrtt lol hope you enjoy and im glad you have no issues with your 2nd zarana
@mgvillanmp478
Жыл бұрын
You shouldn't have to fix anything ...but you know hasblow quality has dropped over the last ten years big time ...sorry about your fig glad at least you can fix it
@Gian4455
Жыл бұрын
Mine had both arms that easily pop out. I feel the material is kinda gummy and that must be part of the problem. My Crimsom Guard did not have any issues, but the Dusty has the same gummy feeling to the upper arm as Zarana does, but have not popped out on me yet. @Articulated Ninja Reviews do you think that some nail polish could work to fix that instead of the Krazy Glue? Keep the great work man!
Пікірлер: 284