Can we repair the rotary or we have to change the complete mechanism
@aarushman1898
Жыл бұрын
Change the rotary no need to change the comeplete mechanism
@jtbackup6465
2 жыл бұрын
I notice on this video that the rotary switch does not working after you put all the parts back on its place. How's the g-shock now? What action you did?
@andesonmorais
2 жыл бұрын
I had the same problem. I removed the rotary button and it stopped working after I put it back. I still haven't found any solution to this problem.
@illmatiK4
2 жыл бұрын
@@andesonmorais same here, I replaced the battery and now the rotary switch is useless. Haven’t seen any solutions either and it’s starting to irritate me.
@totoybats
2 жыл бұрын
i had the same problem my rotor does not work anymore
@amithemo3270
2 жыл бұрын
Do you found a solution? I have the same problem
@stepankruychkov1819
Жыл бұрын
after replacing the battery, you need to restart the mechanism, this can help you.
@md.jarifmostafashahittya6352
2 ай бұрын
Solim bhai, I need a original ga2100 module for my own custom build. Where can I manage it? And how much will it cost?
@PraXii1109
9 ай бұрын
lot of people are having a problem of rotatory crown not working after re-assembly, ive found the problem, its actually the reinsertion process of the switch, if the tip breaks due to a very minute Mal-alignment, the rotatory switch is useless after that, and only option is to replace it. same happened with me, u actually need to mark its correct alignment with the body before removing it. otherwise it will break upon reinsertion.
@hardyrayat605
Жыл бұрын
Hi thanks for the great video i had condensation on my glass in order to get to it I had to remove the rotary and now the rotary is not working is there a trick you can show or tell. Thanks again very grateful
@SolimBD
Жыл бұрын
Thanks for comments
@MdTali0303
7 ай бұрын
Morning Solim, do u have change digital watch polarized film replacement?
@SolimBD
7 ай бұрын
Good Morning, i dont have display, thanks for comments
@reymondnunal6535
2 жыл бұрын
My GB-400 stop functioning that's because it's wet it can be fix?if can were is your service center
@anhad4397
2 жыл бұрын
Is it real g shock because g shock is water proof
@hamid.s.zolfagari
Жыл бұрын
what dose the internal body made of?
@alicokkonusur
Жыл бұрын
thank you for the video , I broke the crown and it is very expensive
@PraXii1109
9 ай бұрын
same here!! can u tell me what did u do after that?? like how did you replaced/repaired it??
@alicokkonusur
9 ай бұрын
@@PraXii1109 actually I had to buy a new crown from the casio service
@PraXii1109
9 ай бұрын
@@alicokkonusur how much did it cost bro??
@alicokkonusur
9 ай бұрын
@@PraXii1109 I am living in Turkey, it is around 7-8 usd.
@val1gryphoon
Жыл бұрын
Is it possible to replace a burnt lcd display with just a few spots not working?
@SolimBD
Жыл бұрын
Working
@theabelsfam457
Жыл бұрын
is that a water? where you soak the green part?
@dharmaiskandar5769
Жыл бұрын
Do u have an experience with after replacement battery for gshock g400 and it doesn't working and the watches still dead
@SolimBD
Жыл бұрын
Try to AC reset
@dharmaiskandar5769
Жыл бұрын
I have reset it or connect ac but it still not working🥺, one of my savior from accident
@dharmaiskandar5769
Жыл бұрын
And I got a spring that tiny spring than other from drop when I want to assembling, do u mind where is it came from?
@tomasagustinmarzetti1321
Жыл бұрын
Hello i need to clean the interior of my Casio sgw back side of the resina glass...help!
@SolimBD
Жыл бұрын
Clean the outside of the watch with very little water on the toothbrush
@tomasagustinmarzetti1321
Жыл бұрын
Thanks but the dirty is inside nota outside
@watchwizard
2 жыл бұрын
Awesome bro 🙂
@SolimBD
2 жыл бұрын
Thanks
@user-fx3yi4ef3c
Жыл бұрын
❤❤❤❤❤
@wisdom6739
4 ай бұрын
How to replace the watch hands? Not available in your video after taking it apart
@gearflamegaming
11 ай бұрын
Hi sir. May i know what liquid you use to clean the circuit board?
If you wash it easily, what do you use to soak the G-Shock watch movement in water? But if it's easy, uncle, it's easy to understand how to disassemble and assemble the ghost watch machine
@sandeepthapa6975
Жыл бұрын
Bro i had the same watch but its showing H Reset and Sub in other screen, I changed the battery but it side buttons are not working once i fix the cover ... Seeking for yours help on this issue
@carlosamaris
11 ай бұрын
having the same issue on a GA-110, have you had any advance with it?
@jagannathwatchcompany9985
2 жыл бұрын
how can i get titan 7122 calibre movement new in kolkata ?
@SolimBD
2 жыл бұрын
Visit nearly WORLD OF TITAN www.dealerservicecenter.in/repair/watch/titan/west-bengal/kolkata
@Stumblenaut
Жыл бұрын
Bro meri g shock work nahi kar rahi hai kya aap thik kar sakte ho
@shakuntsehrawat80957
Жыл бұрын
What is the solution to wash
@SolimBD
Жыл бұрын
soapy water
@ahmetcansaglam3017
Жыл бұрын
Ac resettt
@N3RY93
Жыл бұрын
Hola! Tengo un problema, una de las manecillas se había caído, luego la volvieron a colocar en su lugar, pero desconectaron la placa, así como tu lo tienes, pero luego ya no dejar funcionar las manecillas, no se mueven automáticamente, solo funciona en modo digital, que puedo hacer?
@gidelsonsantos4683
2 жыл бұрын
Belo trabalho professor
@PraXii1109
9 ай бұрын
hey buddy can u help me please!! i accidentally broke the rotatory crown of my G Shock GA-400, can u suggest from where can I buy the spare parts?? or can u send them to me?? Ill pay for the parts+shipping, it will be a great help, thnx.
@eherrera3643
5 ай бұрын
I ordered it from PAC Parts inc, Torrance, California. Part No: CAS-10481551. About 20 Dollars shipped to my house.
Пікірлер: 69